'Jazeera Proofex (formerly known as Jazeera Proof DW)'. Site applied, two-component, grey coloured cementitious coating. Mix Part A (grey coloured powder) with Part B (white, opaque liquid) in a 2:1 mass ratio. Cure for 28 days@25°C. For use with water up to 40°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mix and/or cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5038 Coatings, Paints & Linings

Section Subtitle:

Site applied concrete coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.

WRAS Approval Number:

2106521

Expiry date:

30/06/2026

Approval Holder:

Jazeera Factory for Paints Co (KSA)

Company Name

Jazeera Factory for Paints Co (KSA)

Address

Ammara Street, Aseer Industrial Area, PO Box 1900, Khamis Mushayt, 61961

Country

Saudi Arabia

Phone

+966 07 2211111

View All Listings by this Company

'Acrylatik'. Site applied, Acrylate primers available in white, red, blue and black colours. Apply as per manufacturer's instructions 'Appendix No. 1, TU 2316-002-92 872914-2016' dated '11.02.2016'. Cure for 20 minutes@20°C and then 20 minutes@90°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5042 Coatings, Paints & Linings

Section Subtitle:

Site applied pipe and fittings coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.

WRAS Approval Number:

2104548

Expiry date:

30/04/2026

Approval Holder:

LLC 'ShLKZ' Paints Belogorya

Company Name

LLC 'ShLKZ' Paints Belogorya

Address

309295, Belgorod Region, Shebekino, st. Rzhevskoe shosse,16, Floor 1, Office 02

Country

Russian Federation

View All Listings by this Company

'EZY-PAK™ #100 Packing Compound'. White coloured, PTFE packing compound. Apply as per 'Jet-Lube' TDS for 'EZY-PAK™ #100'. For use with water up to 23°C.

Section:

5100 Gland Packings

Expiry date:

31/07/2026

Approval Holder:

Solaris Global Limited

Company Name

Solaris Global Limited

Address

Union House, 111 New Union Street, Coventry

Postcode

CV1 2NT

View All Listings by this Company

'XIN-6709-01 hose' manufactured from 'GR-PVC 001N' raw material. Single layered, extruded, black coloured PVC hose. For use with water up to 85°C.

Section:

5140 Hoses & Tubing

Expiry date:

31/07/2026

Approval Holder:

ZheJiang Pan`an Jianshan Xinxing Plastic Factory

Company Name

ZheJiang Pan`an Jianshan Xinxing Plastic Factory

Address

46 Zhenxing Road, Industrial Development Zone, Jianshan Town, Pan'an County, 322300

Country

China

Phone

+86-579-84793166

View All Listings by this Company

'Purolite® A600E/9149'. Yellow coloured ion exchange resin. For use with water up to 23°C.

Section:

5150 Ion Exchange Resin

Expiry date:

30/06/2026

Approval Holder:

Purolite Ltd.

Company Name

Purolite Ltd.

Address

Unit D Llantrisant Business Park, Llantrisant, RCT

Postcode

CF72 8LF

Country

Wales

Phone

+44 (0) 1443 229 334

General Email

sales@purolite.com

View All Listings by this Company