Directory Search Results

Print List

#2211558

'S70C'. Off-white coloured (translucent), compression moulded silicone 'O' rings. Shore hardness 70. Tested in-radius size between 0.89mm & 3.5mm. For use with water up to 85°C.

Section:
5410 Rubbers
Section Subtitle:
Silicone - components.
WRAS Approval Number:
2211558
Expiry date:
30/11/2027

Approval Holder:
Precision Polymer Engineering Ltd.
Company Name
Precision Polymer Engineering Ltd.
Address
Greenbank Road, Blackburn
Postcode
BB1 3EA
Phone
+44 (0) 1254 295400
General Email
prepol.sales@idexcorp.com

View All Listings by this Company

Print This Approval


#2212536

'Weld-On 725 Wet 'R' Dry Clear Solvent Cement'. Clear, colourless solvent cement. ‘Weld-On 725 Wet ‘R DRY Blue PVC Cement’ was added to the approval in September 2025. Blue coloured solvent cement. Cure for between 1 & 4 hours@5°C. For use with water up to 23°C. These materials are only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the materials are not covered by the scope of the approval.

Section:
5560 Solvent Cements
Expiry date:
31/12/2027

Approval Holder:
IPS Corporation
Company Name
IPS Corporation
Address
445 W. Victoria Street, Compton, California 90220
Country
USA
Phone
(310) 898-3300
General Email
info@ipscorp.com

View All Listings by this Company

Print This Approval


#2212069

Range of deck mounted single hole, single outlet (fixed) electronically controlled tap assemblies (stainless steel for models 236303 & 236404 only or chromium plated brass for all others). Flow is controlled by a solenoid valve activated by via an infra-red sensor. The spout outlet incorporates a plastic aerator. The inlets incorporate stainless steel strainers and the products are supplied with stainless steel braided PEX line connection hoses. Maximum working pressure 8.0 Bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
2212069
Size:
10mm Spigot
Marking:
STERN on top of body.
Installation Requirements:
R001 R006 R009
Expiry date:
31/12/2027
Model:
235130 Smart XLB, 235220 Smart XLE, 236300 Elite B, 236400 Elite E, 236500 Elite LB, 236600 Elite LE, 236303 Elite B AISI316, 236404 Elite E AISI316.

Approval Holder:
Y. Stern Engineering (1989) Ltd
Company Name
Y. Stern Engineering (1989) Ltd
Address
15 Gan Rave Blvd. Yavne
Postcode
8122217
Country
Israel
Phone
+972 8 9326007
General Email
leah@sternfaucets.com

View All Listings by this Company

Print This Approval


#2212077

Range of single hole, single outlet, electronically controlled tap assemblies (chrome plated brass body). The flow is controlled by a solenoid valve activated via an infra-red sensor. The spout outlet incorporates a plastic aerator. Supplied with a stainless steel braided PEX lined flexible connection hose. Maximum working pressure 8.0 Bar.

Non-metallic materials and components comply with BS6920 at 70°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
2212077
Size:
10mm spigot.
Marking:
Stern on tap body.
Installation Requirements:
R001 R006 R007
Expiry date:
31/12/2027
Model:
350700, 350750, 350700-DP, 350750-DP.

Approval Holder:
Y. Stern Engineering (1989) Ltd
Company Name
Y. Stern Engineering (1989) Ltd
Address
15 Gan Rave Blvd. Yavne
Postcode
8122217
Country
Israel
Phone
+972 8 9326007
General Email
leah@sternfaucets.com

View All Listings by this Company
Manufacturer:
Y. Stern Engineering (1989) Ltd
Company Name
Y. Stern Engineering (1989) Ltd
Address
15 Gan Rave Blvd. Yavne
Postcode
8122217
Country
Israel
Phone
+972 8 9326007
General Email
leah@sternfaucets.com

View All Listings by this Company

Print This Approval


#2210065

A range of wall mounted, single hole, single outlet (fixed) electronically controlled tap assembly with chromium plated brass bodies. The flow is controlled by a solenoid valve activated via an infra-red sensor and a manually adjustable temperature lever. The inlet to the solenoid incorporates a stainless-steel strainer. The spout outlet incorporates a plastic aerator. Maximum working pressure 8.0 bar. Maximum operating temperature 70°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
2210065
Size:
Stainless steel braided polyethylene lined flexible hose assembly incorporating ½” BSP male which connects to a solenoid with a 10mm spigot end connection.
Marking:
Dolphin on body
Installation Requirements:
R001 R009 R010 R040
Expiry date:
31/10/2027
Model:
Dolphin Blue DB450 Dolphin Blue DB475 Dolphin Blue DBL450 Dolphin Blue DBL475

Approval Holder:
Dolphin Solutions Limited
Company Name
Dolphin Solutions Limited
Address
Southpoint Compass Park Bodiam East Sussex
Postcode
TN32 5BS
Country
United Kingdom

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 693 of 2360

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.