Water Regulations Approval Scheme Ltd

Valves

Section Code 2260 : Spherical, metal.

WRAS Approval Number: #241202016

Screwdriver operated spherical valve with a brass & DZR brass body. The fitting incorporates two approved single check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10 Bar. Maximum operating temperature 85°C.

Section:: 2260 Valves
Section Subtitle:: Spherical, metal.
WRAS Approval Number:: 241202016
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: ½” BSP swivel nut inlet x 3/8” BSP (M) outlet
Marking:: Airaga Rubinetterie logo, CR on body
Installation Requirements:: R001
Expiry date:: 31/12/2029
Model:: AI-0312A0403HI

Product Images

Manufacturer:: Altecnic Limited

Company Name
Altecnic Limited
Address
Francesco House, Staples Close Stafford Staffordshire
Postcode
ST16 1WQ
Country
United Kingdom
Phone
+44 (0)1785 218200

View All Listings by this Company

WRAS Approval Number: #241202017

Screwdriver operated spherical valve with a DZR brass body. Maximum working pressure 10 Bar Maximum operating temperature 85°C

Section:: 2260 Valves
Section Subtitle:: Spherical, metal.
WRAS Approval Number:: 241202017
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: ½” BSP swivel nut inlet x 3/8” BSP (M) outlet
Marking:: Airaga Rubinetterie logo, CR on body
Installation Requirements:: R001
Expiry date:: 31/12/2029
Model:: AI-0312A0403CG

Product Images

Approval Holder:: Altecnic Limited

Company Name
Altecnic Limited
Address
Francesco House, Staples Close Stafford Staffordshire
Postcode
ST16 1WQ
Country
United Kingdom
Phone
+44 (0)1785 218200
General Email
sales@altecnic.co.uk

View All Listings by this Company

WRAS Approval Number: #241202034

Range of lever or handwheel operated spherical valves with stainless steel body, stainless steel ball and PTFE seals. Maximum working pressure 20.0 Bar (Models Series 65 & Series 73) Maximum working pressure 50.0 Bar (Models Series 66 & Series 74) Maximum operating temperature 85.0°C

Section:: 2260 Valves
Section Subtitle:: Spherical, metal.
WRAS Approval Number:: 241202034
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See models
Marking:: DelVal and DN on body. DelVal logo, product code, size, manufacture date (MM/YY) and other technical information on data plate on body. DelVal on lever.
Installation Requirements:: R001
Expiry date:: 31/12/2029
Model:: 2pc full bore Series 65 – DN15, DN80, DN100, DN125, DN150, DN200 and DN250 Series 66 - DN15, DN20, DN25, DN32, DN40, DN50, DN65, DN80, DN100, DN125, DN150 and DN200 3pc full bore Series 73 - DN15, DN20, DN25, DN32, DN40, DN50, DN65, and DN80 Series 74 - DN15, DN20, DN25, DN32, DN40, DN50, DN65, and DN80

Product Images

Manufacturer:: DelVal Flow Controls Pvt.Ltd

Company Name
DelVal Flow Controls Pvt.Ltd
Address
Gat No 25, Kavathe, Post Javale, Tal. Khandala, Dist. Satara
Postcode
412801
Country
India

View All Listings by this Company

WRAS Approval Number: #241202046

Range of in-line angled or ‘T’ type spherical valves with chromium plated brass, nickel plated brass, brass or DZR brass bodies and brass ball. Models have screwdriver, lever or butterfly operating members. Maximum working pressure 10.0, 16.0 or 25.0 Bar. Maximum operating temperature 85° or 99°C.

Section:: 2260 Valves
Section Subtitle:: Spherical, metal.
WRAS Approval Number:: 241202046
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See models.
Marking:: IDC logo E mark (~E~ within circle), size and flow arrow on valve body. The DZR models are marked 'CR'.
Installation Requirements:: R001
Expiry date:: 31/12/2029
Model:: 1BVC102 1BVC202 - M 1/4"x M1/4" 1BVC103 1BVC203 – M 3/8" x M 3/8" 1BVC104 1BVC204 - M 1/2" x M 1/2" 1BVC106 1BVC206 – M 3/4" x M 3/4" 1BVC108 1BVC208 – M 1" x M 1" 1BVC110 1BVC220 – M 1 1/4" x M 1 1/4" 1BVC112 1BVC222 – M 1 1/2" x M 1 1/2" 1BVC114 1BVC224 – M 2" x M 2" 1BVD102 1BVD202 – F 1/4"x M1/4" 1BVD103 1BVD203 – F 3/8" x M 3/8" 1BVD104 1BVD204 – F 1/2" x M 1/2" 1BVD106 1BVD206 – F 3/4" x M 3/4" 1BVD108 1BVD208 – F 1" x M 1" 1BVD110 1BVD220 – F 1 1/4" x M 1 1/4" 1BVD112 1BVD222 – F 1 1/2" x M 1 1/2" 1BVD114 1BVD224 – F 2" x M 2" 1WMC101 – 15mm x 15mm x 3/4”M 1WMC201NP – 15mm x 15mm x 15mm 1FWA100 – 14.7mm x 1/2”F 1FWA101 – 15mm x 1/2”F 1FWA102 – 22mm x 3/4”F 1FWB100 – 14.7mm x 1/2”F 1FWB101 – 15mm x 1/2”F 1WMB103NP – 15mm x 3/8”M 1WMB102NP – 15mm x 1/2”M 1WMB101NP – 15mm x 3/4”M 1GLE011 1GLE011NP – 15mm x 15mm 1GLE113NP – 15mm x 3/8”M 1GLE112NP – 15mm x 1/2”M 1WHA103NP – 15mm x 3/8”M 1WHA102NP – 15mm x 1/2”M 1WHA201NP – 22mm x 3/4”M 1WHA100LNP – 14.7mm x 3/4”M 1WMA101LNP – 15mm x 3/4”M 1GLA000 1GLA000NP – 14.7mm x 14.7mm 1GLAa00NP 1GLA000L – 14.7mm x 14.7mm 1GLA000LNP – 14.7mm x 14.7mm 1GLA010 1GLA010NP – 15mm x 15mm 1GLAa10NP 1GLA010L – 15mm x 15mm 1GLA010LNP 1GLAa10LNP – 15mm x 15mm 1GLA020 1GLA020NP – 22mm x 22mm 1GLAa20NP 1GLA020L – 22mm x 22mm 1GLA020LNP 1GLAa20LNP – 22mm x 22mm 1GLC011 1GLC011NP – 15mm x 15mm 1GLC021 1GLC021NP – 22mm x 22mm 1GLB010LNP 1GLBa10NP – 15mm x 15mm 1GLB010 1GLB010NP – 15mm x 15mm 1GLB020LNP 1GLBa20NP – 22mm x 22mm 1GLB020 1GLB020NP - 22mm x 22mm

Product Images

Approval Holder:: IDC Plumbing & Heating Technology (Beijing) Ltd

Company Name
IDC Plumbing & Heating Technology (Beijing) Ltd
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing
Postcode
100015
Country
China
Phone
008610 51659550 ext 312
General Email
Jerry.tang@idcgroup.com.cn

View All Listings by this Company
Manufacturer:: IDC Fluid Control Co., Ltd.

Company Name
IDC Fluid Control Co., Ltd.
Address
Mechanical & Elecrical Industrial Area. C, Yuhuan, Taizhou, Zhejiang
Country
China
General Email

View All Listings by this Company

WRAS Approval Number: #241204013

Spherical valves incorporating a drain port and two check valve cartridges (verified by test, suitable for backflow protection against fluid category 3) in a DZR brass body. Above ground use only. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:: 2260 Valves
Section Subtitle:: Spherical, metal.
WRAS Approval Number:: 241204013
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 290460 1” BSP(F) x 1”BSP(F) 290450 3/4” BSP(F) x 1” BSP(F)
Marking:: Altecnic logo, flow arrow and CR on body
Installation Requirements:: R001 R511
Expiry date:: 31/12/2029
Model:: 290450 290460

Product Images

Manufacturer:: Caleffi S.p.A

Company Name
Caleffi S.p.A
Address
Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)
Postcode
28010
Country
Italy
Phone
+39 0322 8491

View All Listings by this Company