Range of two-way manual diverter valves with shut-off position. Products are for insertion into specifically dimensioned bodies. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:

2050 Diverter

Section Subtitle:

Diverter cartridge(s) with manual adjustment.

WRAS Approval Number:

241002020

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

26mm O.D.

Marking:

HG on body

Installation Requirements:

R001

Expiry date:

31/10/2029

Model:

30079500 & 30650210

Product Images

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Range of concealed and exposed two-way diverters, (brass bodies – various finishes, trim sets and operating members). The inlets on XX1650YY and XX1721YY models incorporate approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 Bar. Maximum operating temperature 85°C (PSA019 YY, PSA020 YY & XX1782YY) Maximum operating temperature 60°C (PSH049, XX1650YY, RZ/1721 & XX1721YY).

Section:

2050 Diverter

Section Subtitle:

Diverter cartridge(s) with manual adjustment.

WRAS Approval Number:

250202002

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Compression models are for use with copper pipe (manufactured to BS EN 1057)

Size:

½” BSP (M) (XX1650YYY & XX1721YYY) 19mm compression fitting (XX1782YY)

Marking:

Lefroy Brooks logo on body (XX1782YY) or operating member (XX1650YY & XX1721YY)

Installation Requirements:

R001 R010 R040

Expiry date:

28/02/2030

Model:

Exposed PSA019YY PSA020YY Concealed XX1782YY XX1650YY XX1721YY Rough insets only: PSH049 RZ/1721 Where XX denotes the type of trim/operating members and can be replaced with any of the following, as examples: LB (Classic cross handle) LS (Classic star handle) BL (Classic lever black ceramic) WL (Classic lever white ceramic) CH (Connaught cross handle) CR (Black crystal lever) FH (La Chapelle cross handle) FM (La Chapelle lever metal) FB (La Chapelle lever black ceramic) FW (La Chapelle lever white ceramic) MH (Mackintosh cross handle) ML (Mackintosh lever) MB (Mackintosh black lever) TH (Ten Ten handwheel) TL (Ten Ten lever) Where YY denotes the colour/plating options and can be replaced with any of the following as examples: CP = Polished Chrome NK = Polished Nickel BC = Brushed Chrome BN = Brushed Nickel PB = Polished Brass BPB = Brushed Brass AB = Aged Brass TA = Taunton AG = Antique Gold HRG = Hard Rubbed Gold CM = Champagne Gold BCM = Brushed Champagne Gold CO = Copper MBC = Matt Black Chrome

Approval Holder:

Lefroy Brooks

Company Name

Lefroy Brooks

Address

Unit 3 Marston Industrial Estate Marston Road Wolverhampton

Postcode

WV2 4LX

Country

United Kingdom

Phone

01902 390 891

General Email

rob@lefroybrooks.co.uk

View All Listings by this Company

Range of pre-set pressure relief valves incorporating DZR brass bodies and an EPDM diaphragms and PTFE washers. The valve is fitted with hand operated rotating easing gear. Maximum working – see model. Maximum operating temperature 85°C

Section:

2210 Valves

Section Subtitle:

Pressure relief.

WRAS Approval Number:

250604703

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

see model

Marking:

SYR, size, DR and flow arrow on body. Size, Reliance logo, PREL 102 and pressure rating on cap.

Installation Requirements:

R001

Expiry date:

1/06/2030

Model:

PREL102014 1/2” FBSP x 1/2” FBSP 3.5 Bar PREL102008 1/2” FBSP x 1/2” FBSP 5.0 Bar PREL102001 1/2” FBSP x 1/2” FBSP 6.0 Bar PREL102025 1/2” FBSP x 1/2” FBSP 7.0 Bar PREL102004 1/2” FBSP x 1/2” FBSP 8.0 Bar PREL102040 1/2” MBSP x 1/2” FBSP 3.5 Bar PREL102041 1/2” MBSP x 1/2” FBSP 5.0 Bar PREL102042 1/2” MBSP x 1/2” FBSP 6.0 Bar PREL102043 1/2” MBSP x 1/2” FBSP 8.0 Bar PREL102009 1/2” MBSP x 15mm 3.5 Bar PREL102003 1/2” MBSP x 15mm 5.0 Bar PREL102005 1/2” MBSP x 15mm 6.0 Bar PREL102044 1/2” MBSP x 15mm 8.0 Bar PREL102045 3/4” FBSP x 3/4” FBSP 3.5 Bar PREL102046 3/4” FBSP x 3/4” FBSP 5.0 Bar PREL102031 3/4” FBSP x 3/4” FBSP 6.0 Bar PREL102047 3/4” FBSP x 3/4” FBSP 8.0 Bar PREL102048 3/4” MBSP x 3/4” FBSP 3.5 Bar PREL102118 3/4” MBSP x 3/4” FBSP 5.0 Bar PREL102018 3/4” MBSP x 3/4” FBSP 6.0 Bar PREL102024 3/4” MBSP x 3/4” FBSP 8.0 Bar PREL102020 3/4” MBSP x 22mm 3.5 Bar PREL102049 3/4” MBSP x 22mm 5.0 Bar PREL102027 3/4” MBSP x 22mm 6.0 Bar PREL102050 3/4” MBSP x 22mm 8.0 Bar PREL102023 3/4” FBSP x 3/4” FBSP 4.0 Bar PREL102110 1/2” MBSP x 1/2” MBSP 4.0 Bar PREL102111 1/2” MBSP x 15mm 4.0 Bar PREL102105 1/2” MBSP x 15mm 6.0 Bar

Approval Holder:

Reliance Worldwide Corporation

Company Name

Reliance Worldwide Corporation

Address

Horton Road, West Drayton

Postcode

UB7 8JL

Country

United Kingdom

Phone

+44 7730 052060

General Email

PETER.LANCASTER@RWC.COM

View All Listings by this Company

Range of pre-set pressure relief valves with a DZR brass body, incorporating an approved check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2). Compression connection for use with copper tube to BS EN 1057. Maximum working pressure: see models. Maximum operating temperature: 23.0°C

Section:

2210 Valves

Section Subtitle:

Pressure relief.

WRAS Approval Number:

241102705

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

22mm x ¾” BSP (M)

Marking:

RWC, SYR, flow arrow and DR on body. DN, Reliance valves and pressure rating on cap.

Installation Requirements:

R001

Expiry date:

30/11/2029

Model:

CORE215002 (6.0 bar) CORE215005 (3.5 bar) CORE215008 (5.0 bar) CORE215103 (8.0 bar)

Product Images

Approval Holder:

Reliance Worldwide Corporation

Company Name

Reliance Worldwide Corporation

Address

Horton Road, West Drayton

Postcode

UB7 8JL

Country

United Kingdom

Phone

+44 7730 052060

General Email

PETER.LANCASTER@RWC.COM

View All Listings by this Company

Range of latching (LV), proportional (PV), servo (SV), pilot (EV) solenoid valves with natural (appear white), plastic bodies. Pushfit models are for use with John Guest LLDPE and DMFIT LLDPE pipes. The inlets and outlets of all models are available with plastic flow regulators or plastic or copper strainers. All valves have a maximum working pressure of 10.0 bar. The bodies of valves with a silicone diaphragm are marked with an ‘S’ at the end of the model, e.g. ‘EV118/AS’ and have a maximum operating temperature 85°C. Valves with an EPDM diaphragm are for cold water use only and do not include this ‘S’ marking.

Section:

2240 Valves

Section Subtitle:

Solenoid, plastic.

WRAS Approval Number:

240902713

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Valves with a black coloured body are not included on this approval.

Size:

Please refer to model.

Marking:

Hydra and model on body.

Installation Requirements:

R001 R008

Expiry date:

30/09/2029

Model:

EV - Standard (pilot operated) Solenoid Valve - Electrically Operated 220/240, 110/120 VAC. 24, 12 AC/DC LV - Latching (Bi-Stable) Solenoid Valve - Latching (Pulse) Operated 6, 12 VDC PV - Proportional Solenoid Valve - Proportional Operated 12, 24 VDC SV - Servo Solenoid Valve Servo Assisted 12 VDC KEY example – LV118/A LV – Valve type. Outlet number: XX1XX/X: one outlet XX2XX/X: two outlets XX3XX/X: three outlets Outlet angle: XXX18/X: 180 degrees (straight) XXX09/X: 90 degrees (elbow) Body type: XXXXX/xxnn: Variations: XX118/A (3/4" BSP x Ø11mm BARB) XX118/B (Ø3/8" x Ø3/8" PUSHFIT) XX118/C (3/8" BSP x 3/8" BSP) XX118/D (15mm COMPRESSION x 15mm COMPRESSION) XX118/E (3/4" BSP x 3/4" BSP) XX118/EB38 (3/4" BSP x 3/8" PUSHFIT) XX118/EB08 (3/4" BSP x 8mm PUSHFIT) XX118/EB06 (3/4" BSP x 6mm PUSHFIT) XX118/EB14 (3/4" BSP x 1/4" PUSHFIT) XX118/F (3/4" BSP x Ø10mm TUBE) XX118/FE (3/4" BSP x Ø3/8" TUBE) XX118/G (1/2" BSP x 1/2" BSP – SHORT THREAD -14.25MM) XX118/H (3/4" BSP x Ø6mm BARB) XX118/HP (3/4" BSP x Ø11mm BARB + SNAP BRACKET) XX118/HP14 (3/4" BSPM x 1/4" PUSHFIT + SNAP BRACKET) XX118/K (Ø8mm x Ø8mm PUSHFIT) XX118/L (Ø10mm x Ø10mm PUSHFIT) XX118/M (1/2" BSP x 1/2" BSP - LONG) XX118/N (Ø8mm x Ø10mm PUSHFIT) XX118/O (1/2" BSP x 1/2" BSP) XX118/P (Ø3/8" x Ø5/16" PUSHFIT) XX118/S (Ø8mm x Ø6mm PUSHFIT) XX118/T (Ø6mm x Ø6mm PUSHFIT) XX118/U (¼” JG x ¼” JG) XX118/J (3/4" BSP x Ø13mm BARB) XX109/B (3/4" BSP x Ø13mm BARB) XX109/D (3/8" PUSHFIT x 1/4" PUSHFIT) XX109/A (3/4" BSP x Ø11mm BARB) XX209/A (3/4" BSP x Ø11mm BARB) XX209/B (3/4" BSP x Ø13mm BARB) XX218/A (3/4" BSP x Ø11mm BARB) XX218/B (3/4" BSP x Ø10mm TUBE) XX218/C (3/4" BSP x Ø13mm BARB) XX218/D (3/4" BSP x Ø10mm TUBE + Ø11mm BARB) XX218/E (3/4" BSP x Ø3/8" PUSHFIT) XX218/HP (3/4" BSP x Ø11mm BARB + SNAP BRACKET) XX109/SA SAD VALVE (3/4" BSP x Ø11mm BARB) NOTES: Outlet Number: XX1XX/X: One Outlet XX2XX/X: Two Outlets XX3XX/X: Three Outlets Outlet angle: XXX18/X: 180 degrees (straight) XXX09/X: 90 degrees (elbow) Body Type: XXXXX/xxnn: Body type.

Product Images

Approval Holder:

Hydralectric Group Ltd.

Company Name

Hydralectric Group Ltd.

Address

5 High Road, Byfleet, Surrey

Postcode

KT14 7QE

Country

United Kingdom

Phone

+44 1932 334 200

General Email

jamie.balkwill@hydralectric.com

View All Listings by this Company

Manufacturer:

EKI doo

Company Name

EKI doo

Address

Majer 27, 8340 Crnomelj

Country

Slovenia

General Email

View All Listings by this Company