Directory Search Results

Print List

#260155055

'Acoflon 215'. Black coloured, compression moulded PTFE + Carbon ring. For use with water up to 23°C.

Section:
5294 Polytetrafluoroethylene (PTFE)
Section Subtitle:
Components.
WRAS Approval Number:
260155055
Expiry date:
31/01/2031

Approval Holder:
Acoplastic A/S
Company Name
Acoplastic A/S
Address
Bjergvangen 2, DK-3060 Espergærde
Country
Denmark
Phone
+45 4925 2174
General Email
info@acoplast.dk

View All Listings by this Company

Print This Approval


#260102710

Side entry BS1212-4 (2016) compact type float operated valve with delayed action for WC flushing cisterns. The inlet incorporates a flow restrictor. Maximum working pressure 10.0 Bar Cold water use only.

Section:
2075 Float Operated Inlet Valve
Section Subtitle:
Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.
WRAS Approval Number:
260102710
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M)
Marking:
LAB logo, WRAS logo, BS1212-4, datum level on valve body.
Installation Requirements:
R001 R550
Expiry date:
31/01/2031
Model:
A320

Approval Holder:
LAB (XIAMEN) SANITARY FITTINGS INC.
Company Name
LAB (XIAMEN) SANITARY FITTINGS INC.
Address
No. 41, Siming Industrial Park, Tong An Industrial Center, Xiamen
Country
361100, Fujian
Phone
+86-592-7395336

View All Listings by this Company
Manufacturer:
LAB (XIAMEN) SANITARY FITTINGS INC.
Company Name
LAB (XIAMEN) SANITARY FITTINGS INC.
Address
No. 41, Siming Industrial Park, Tong An Industrial Center, Xiamen
Country
361100, Fujian
Phone
+86-592-7395336

View All Listings by this Company

Print This Approval


#260102711

Range of bottom entry BS1212-4 (2016) compact type float operated inlet valve for WC flushing cisterns, delayed fill with a plastic body and a plastic flow regulator at the inlet. Maximum working pressure 10.0 Bar Cold water use only

Section:
2075 Float Operated Inlet Valve
Section Subtitle:
Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.
WRAS Approval Number:
260102711
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M)
Marking:
A122 LAB logo and website, BS 1212-4 on top of inlet valve. A123 LAB logo, BS 1212-4 and WRAS logo on top of inlet valve. Datum level on valve body.
Installation Requirements:
R001 R550 R560
Expiry date:
31/01/2031
Model:
A122 A123

Approval Holder:
LAB (XIAMEN) SANITARY FITTINGS INC.
Company Name
LAB (XIAMEN) SANITARY FITTINGS INC.
Address
No. 41, Siming Industrial Park, Tong An Industrial Center, Xiamen
Country
361100, Fujian
Phone
+86-592-7395336

View All Listings by this Company
Manufacturer:
LAB (XIAMEN) SANITARY FITTINGS INC.
Company Name
LAB (XIAMEN) SANITARY FITTINGS INC.
Address
No. 41, Siming Industrial Park, Tong An Industrial Center, Xiamen
Country
361100, Fujian
Phone
+86-592-7395336

View All Listings by this Company

Print This Approval


#260102726

Range of WC flushing cisterns incorporating a side entry (delayed action) compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The float operated valve incorporates a flow restrictor on the inlet. The cistern is operated by an optional manual dual push button and incorporates a servicing valve on the inlet supply. The waste elbow on model BDS-K210-A01-ESG6 is optional. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
260102726
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M)
Marking:
BAGNODESIGN on cistern cover. BANGNODESIGN model and 6 litre line inside cistern.
Installation Requirements:
R001 R556 R581
Expiry date:
31/01/2031
Model:
BAGNODESIGN BDS-K210-A01-ESG6 & BAGNODESIGN BDS-K210-D03-ESG3

Approval Holder:
BAGNODESIGN (SANIPEXGROUP)
Company Name
BAGNODESIGN (SANIPEXGROUP)
Address
Unit 1 Oakwell Park Trading Estate Birstall Leeds
Postcode
WF17 9LU
Country
United Kingdom
General Email
dan@sanipexgroup.com

View All Listings by this Company

Print This Approval


#260212901

Section:
0531 Combination Tap Assemblies
Description:
A Range of Two hole tap(s) with a single outlet and a fixed spout, incorporating a self-cancelling diverter to shower outlet with Type HC backflow protection device (verified by test - suitable for backflow protection against Fluid Category 3)
Deck Mounted Capable of achieving AUK2 tap gap.
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Installation Requirements:
R001 R005 R030
Expiry date:
28/02/2031

Product IdentificationSurface finishInlet DimensionMax Wrk. PressureMax Op. Temp.MarkingMarking LocationAll metals in the water pathway are on the 4msi positive listHeadworkFixing TypeSpout Outlet Includes
1044-XXVarious¾” BSP (M)10 bar60 °CCARLOTABODYNo1/4 Turn ceramic discMetal BacknutsAerator
1034-XXVarious¾” BSP (M)10 bar60 °CCARLOTABODYNo1/4 Turn ceramic discMetal BacknutsAerator
1033-XXVarious¾” BSP (M)10 bar60 °CCARLOTABODYNo1/4 Turn ceramic discMetal BacknutsAerator
1032-XXVarious¾” BSP (M)10 bar60 °CCARLOTABODYNo1/4 Turn ceramic discMetal BacknutsAerator
1031-XXVarious¾” BSP (M)10 bar60 °CCARLOTABODYNo1/4 Turn ceramic discMetal BacknutsAerator

Notes & Further Information

1.For the series 1044-XX, 1034-XX,1033-XX,1032-XX,1031-XX, the only difference is handle style. 2.XX represent different finishes and can be replaced by CR =Chrome, MB=Matte black, BB=Brushed brass, BN=Brushed nickel,GM=Gun Metal.


Approval Holder:
Zhejiang Carlota Sanitary Ware Manufactory Co.,Ltd
Company Name
Zhejiang Carlota Sanitary Ware Manufactory Co.,Ltd
Address
No.10 Jinbo Road, Bingang Industrial Area, Shamen Town, Yuhuan, Zhejiang Province
Country
China
Phone
0086-13777626837
General Email
305779895@qq.com

View All Listings by this Company
Manufacturers:
Zhejiang Carlota Sanitary Ware Manufactory Co., Ltd

Print This Approval



Back To Directory Sections

Page 636 of 641

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.