Range of in-line adjustable pressure reducing valves with DZR brass bodies and NBR ‘O’-rings. The valve incorporates a test port. The outlet pressures range from 1.5 bar to 6.0 bar. Maximum supply pressure 25.0 bar. Cold water use only.

Section:

2200 Valves

Section Subtitle:

Pressure reducing.

WRAS Approval Number:

2212800

Size:

½”, ¾”, 1”, 1¼”, 1½”, 2” BSP (M) inlet/outlet

Marking:

QR code Resideo (brand of Pittway Sarl), Braukmann & Model No., DN, DR, Made in (Germany), date of manufacture (YYWW) on data label on body. QR code, Braukmann & Model No. and WRAS on second data label on body.

Installation Requirements:

R001 R120

Expiry date:

31/12/2027

Model:

D06F-1/2BGB, D06F-3/4BGB, D06F-1BGB, D06F-11/4BGB, D06F-11/2BGB, D06F-2BGB.

Approval Holder:

Pittway Sarl

Company Name

Pittway Sarl

Address

A3 - ZA La Pièce 6 1180 Rolle

Country

Switzerland

View All Listings by this Company

Range of pressure reducing valves with DZR brass, gunmetal or stainless-steel bodies. Maximum inlet pressure for HP and SP Models = 25.0 bar. Maximum inlet pressure for LP Models = 6.0 bar. Maximum operating temperature 60°C

Section:

2200 Valves

Section Subtitle:

Pressure reducing.

WRAS Approval Number:

2209066

Note:

IRN R008 applies only to model with the clear cap.

Size:

½” BSP M to 2” BSP M inlet/outlet

Marking:

BWT ON OPERATING MEMBER FLOW ARROW ON BODY

Installation Requirements:

R001 R008

Expiry date:

30/09/2027

Model:

BWT RED GUNMETAL BWT INOX STAINLESS STEEL BWT ECO DZR BRASS YY: outlet pressure range; LP (0.5-3 bar), SP (1.5-7 bar), or HP (3-12 bar) XX: Size (DN); 15, 20, 25, 32, 40, or 50 – (9060 DZR-brass only available in 15, 20, 25) ZZ: Pressure/Temperature; 16 (16 bar max inlet pressure, for cold water only), 25 (25 bar max inlet pressure, for warm water at 60°C) in case of YY=LP the maximum inlet pressure is limited to max 6 bar

Approval Holder:

BWT Holding GmbH

Company Name

BWT Holding GmbH

Address

Walter-Simmer-Straße 4 Mondsee

Postcode

5310

Country

Austria

Phone

+436648172152

General Email

andreas.stiegler@aidu.solutions

View All Listings by this Company

Normally closed (monostable) or latching (bistable) solenoid valve with a plastic body, EPDM membrane and ‘O’-rings, for insertion into specifically dimensioned bores. The inlet incorporates a plastic filter. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:

2240 Valves

Section Subtitle:

Solenoid, plastic.

WRAS Approval Number:

2211333

Size:

OD 7.5mm

Marking:

A.u.K Muller, model type, orifice size, pressure range, identification code, production date (WW/YY), and either B or M (B = Bistable/M = Monostable) on adhesive label on body.

Installation Requirements:

R001 R008

Expiry date:

30/11/2027

Model:

50.005.850

Product Images

Approval Holder:

A.u.K. Müller GmbH & Co. KG

Company Name

A.u.K. Müller GmbH & Co. KG

Address

Dresdener Str. 162, D-40595 Düsseldorf

Country

Germany

Phone

+49 211 7391 0

General Email

info@akmueller.de

View All Listings by this Company

Manufacturer:

A.u.K. Müller GmbH & Co. KG

Company Name

A.u.K. Müller GmbH & Co. KG

Address

Dresdener Str. 162, D-40595 Düsseldorf

Country

Germany

Phone

+49 211 7391 0

General Email

info@akmueller.de

View All Listings by this Company

Range of spherical valves with various operating members, brass bodies, brass balls, FKM ‘O’-rings or EPDM ‘O’-rings (S84W series only) and PTFE seats. Maximum working pressure 40.0 bar. Maximum operating temperature 85°C.

Section:

2260 Valves

Section Subtitle:

Spherical, metal.

WRAS Approval Number:

2210353

Size:

See models.

Marking:

Rub logo, size, DN, PN, casting date (YYWW) and serial number on body.

Installation Requirements:

R001

Expiry date:

31/10/2027

Model:

SERIES S84: S84xyyz. Where: x = size: B = ¼", C = ⅜", D = ½", E = ¾", F = 1", G = 1¼", H = 1½", I = 2". yy = thread type and handle: 00 = BSPP FxF , long lever, 06 = BSPP FxF, T-handle, 15 = BSPP FxF, lockable handle (light-blue), 20 = BSPP MxF, long lever, 26 = BSPP MxF, T-handle, 25 = BSPP MxF, lockable handle (light-blue), T0 = BSPP FxF, stubby (short) lever, 08 = BSPT FxF, long lever (no markings on the lever), 50 = BSPT FxF, long lever, 56 = BSPT FxF, T-handle, 59 = BSPT FxF, lockable handle (light-blue), 52 = BSPT MxF, long lever, 57 = BSPT MxF, T-handle, 55 = BSPT MxF, lockable handle (light-blue). z = handle variations: A = light-blue handle colour, B = blue handle colour, K = black handle colour, KA = customised laser marking on red handle, L = customised laser marking on blue handle, R = red handle colour. SERIES S84W: S84xyyWz. Where: x = size: B = ¼", C = ⅜", D = ½", E = ¾", F = 1", G = 1¼", H = 1½", I = 2". yy = thread type and handle: 00 = BSPP FxF , long lever (green), 06 = BSPP FxF, T-handle (green), 15 = BSPP FxF, lockable handle (light-blue), 20 = BSPP MxF, long lever (green), 26 = BSPP MxF, T-handle (green), 25 = BSPP MxF, lockable handle (light-blue), z = handle variations: A = light-blue handle colour, B = blue handle colour, K = black handle colour, M = return spring lever, R = red handle colour, UP = customised laser marking on handle. SERIES S90: S90xyyz Where: x = size: B = ¼", C = ⅜", D = ½", E = ¾", F = 1", G = 1¼", H = 1½", I = 2". yy = thread type and handle: 00 = BSPP FxF, long lever (red), 16 = BSPP FxF, T-handle (red), 15 = BSPP FxF, lockable handle (light-blue), 20 = BSPP MxF, long lever (red), 26 = BSPP MxF, T-handle (red), 25 = BSPP MxF, lockable handle (light-blue), 22 = BSPP MxM, long lever (red), 27 = BSPP MxM, T-handle (red), 29 = BSPP MxM, lockable handle (light-blue). z = handle variations: A = light-blue handle colour, B = blue handle colour, K = black handle colour, L = customised laser marking on handle, P = customised laser marking on handle. SERIES S64: S64xyy(y)(y) Where: x = size: D = ½", E = ¾", F = 1", G = 1¼", H = 1½", I = 2". yy(y)(y) = thread type, unplated and low torque: 00 = BSPP FxF thread with brass trim (stem & ball), 00G = same as 00, but body and end-cap are in brass unplated (instead of nickel plated), 05 = BSPP FxF thread with brass trim (stem & ball), 00A = BSPP FxF thread with brass trim (stem & ball), low torque (sizes 1” through 2” only), 00AG = same as 00A, but body and end-cap are in brass unplated (instead of nickel plated).

Approval Holder:

BONOMI Industries srl

Company Name

BONOMI Industries srl

Address

Via Padana Superiore, 29 Mazzano (BS)

Postcode

25080

Country

Italy

Phone

+39 030 21 244 241

General Email

info@rubvalves.com

View All Listings by this Company

Manufacturer:

BONOMI Industries srl

Company Name

BONOMI Industries srl

Address

Via Padana Superiore, 29 Mazzano (BS)

Postcode

25080

Country

Italy

Phone

+39 030 21 244 241

General Email

info@rubvalves.com

View All Listings by this Company

Range of quarter turn, lever handle or butterfly operated spherical valves with nickel plated brass bodies, chrome plated brass balls and PTFE seals. For use with copper pipe BS EN 1057. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.

Section:

2260 Valves

Section Subtitle:

Spherical, metal.

WRAS Approval Number:

2204095

Size:

SEE MODELS

Marking:

TPK, size, date of manufacture (MM/YY) on body. TPK, ON/OFF and size on lever.

Installation Requirements:

R001

Expiry date:

30/04/2027

Model:

Red handle circlip reduced bore ball valve models: 909978 15MM 909990 22MM Red handle circlip full bore ball valve models: 111355 15MM 111380 22MM Blue handle circlip full bore ball valve models: 111406 15MM 111430 22MM

Approval Holder:

Travis Perkins PLC

Company Name

Travis Perkins PLC

Address

Ryehill House Rye Hill Close Lodge Farm Industrial Estate Northampton

Postcode

NN5 7UA

Country

United Kingdom

Phone

07392109053

General Email

benjamin.cockerill@travisperkins.co.uk

View All Listings by this Company