Range of water filter heads and housings (sumps). The HIS/IN4 models have a chrome plated stainless steel filter head and housing, all other models have a plastic filter head and housing. Ecofast/IN3/QT models incorporate an integral quick turn shut off valve within the filter head to allow the filter housing to be removed. All models are for use with John Guest LLDPE pipe. Maximum working pressure 6.0 bar. Cold water use only.

Section:

1050 Filters and Housings

WRAS Approval Number:

2204075

Note:

R008 does not apply to the HIS/IN4 models.

Size:

⅜" push fit inlet and outlet.

Marking:

Filter heads and housings: Ecofast/IN3/QT: Doulton on filter head. All other models: Doulton on adhesive label on filter sump. Cartridges: Doulton or British Berkefeld (brand of Doulton Water Filters) (see model section) and filter model on top of filter/treatment cartridge.

Installation Requirements:

R001 R008 R120 R150 R170

Expiry date:

30/04/2027

Proviso:

* The product(s) listed on this approval fall under the scope of the GB Biocidal Products Regulations (GB BPR) by either incorporating or producing an active substance and/or incorporating a treated article. The product(s) has/have been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. The decision of the Scheme to list them is not to be taken as any guide as to their effectiveness to do the job for which the active substance and/or treated article is present. WRAS accepts no liability for the material meeting the requirements of the GB Biocidal Products Regulations.

Model:

Ecofast/IN3/QT. HIP DUO/IN2. HIP/IN1. HIS/IN4. The models can be supplied with any of the filter cartridges as listed below. Except the HIP DUO/IN2 housing which always includes the Ultracarb Filter Candle in one housing and the limescale reduction/ ONINFL cartridge in the other. British Berkefeld brands: Standard Filter Candle*, Sterasyl Filter Candle*, Super Sterasyl Filter Candle*, Ultra Sterasyl Filter Candle*, ATC Supersterasyl*. Doulton brands: Standard Filter Candle*, GOFgravity1*, Super Sterasyl Filter Candle*, Ultra Sterasyl Filter Candle*, GOFgravity2*, Ultra Fluoride Filter Candle*, GOFgravity3*, Ultracarb Filter Candle*, Biotect Ultra Filter Candle*, Ultracarb SI Filter Candle*, Biotect Ultra SI Filter Candle*, ONINFE*, Fluoride Reduction Water Treatment Cartridge, ONINFF, Nitrate Reduction Water Treatment Cartridge, ONINFN, Limescale Reduction Water Treatment Cartridge, ONINFL, Chlorine Reduction Water Treatment Cartridge, ONINFC, Sediment Reduction Water Treatment Cartridge, ONINFS.

Product Images

Approval Holder:

Fairey Industrial Ceramics Ltd

Company Name

Fairey Industrial Ceramics Ltd

Address

Lower Milehouse Lane Newcastle-Under-Lyme

Postcode

ST5 9BT

Country

United Kingdom

Phone

01782 664445

General Email

jdolman@doulton.com

View All Listings by this Company

Manufacturer:

Fairey Industrial Ceramics Ltd

Company Name

Fairey Industrial Ceramics Ltd

Address

Lower Milehouse Lane Newcastle-Under-Lyme

Postcode

ST5 9BT

Country

United Kingdom

Phone

01782 664445

General Email

jdolman@doulton.com

View All Listings by this Company

A range of blue epoxy coated steel reverse rinsing fine filters with a stainless-steel sieve and an EDPM O-ring. Supplied with two pressure gauges and metal ball valve on the drain. Maximum working pressure 16 bar. Maximum operating temperature 40°C.

Section:

1050 Filters and Housings

Size:

DN65, DN80 or DN100 Flanged (Replaces XX in the model code).

Marking:

Resideo, Braukmann, Model name, PN, DN and other technical information on adhesive label on body.

Installation Requirements:

R001 R110 R150 R170 R511

Expiry date:

30/04/2027

Model:

F78TS-XXFY Y denotes the mesh size of the filter and can be replaced with any of the following: A = 100μm, B = 20μm, C = 50μm, D = 200μm.

Product Images

Approval Holder:

Pittway Sarl

Company Name

Pittway Sarl

Address

A3 - ZA La Pièce 6 1180 Rolle

Country

Switzerland

View All Listings by this Company

Manufacturer:

Ademco 1 GmbH

Company Name

Ademco 1 GmbH

Address

Hardhofweg 40, 7481 Mosbach

Country

Germany

View All Listings by this Company

A range of water filter cartridges with polypropylene bodies. Maximum working pressure 8.6 bar. Cold water use only.

Section:

1055 Filter Cartridges

WRAS Approval Number:

2204056

Note:

This approval doesn’t include filter heads.

Size:

18mm spigot

Marking:

Paragon water systems and product information on adhesive label on body.

Installation Requirements:

R001 R120 R150 R170

Expiry date:

30/04/2027

Model:

95230, 93703 & 93705. Models added March 2023: 95230NZ, 93703NZ & 93705NZ.

Product Images

Approval Holder:

Paragon Water Systems, Inc.

Company Name

Paragon Water Systems, Inc.

Address

13805 Monroes Business Park, Tampa Fl. 33635 USA

General Email

cbird@paragonwater.com

View All Listings by this Company

Range of brass, chrome plated brass or DZR brass compression fittings for use with copper pipe only. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1150 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, metal, for use with copper tube - above ground use only.

WRAS Approval Number:

2110392

Size:

6mm -54mm

Marking:

SCS LOGO and size on body.

Installation Requirements:

R001

Expiry date:

31/10/2026

Model:

BF410001 15MM STRAIGHT COUPLER C X C BF410002 22MM STRAIGHT COUPLER C X C BF410003 28MM STRAIGHT COUPLER C X C BF410088 10MM STRAIGHT COUPLER C X C BF411001 1/2" X 15MM STRAIGHT COUPLER MI X C BF411002 3/4" X 22MM STRAIGHT COUPLER MI X C BF411003 1" X 28MM STRAIGHT COUPLER MI X C BF411018 1/2" X 10MM STRAIGHT COUPLER MI X C BF411088 1/4" X 10MM STRAIGHT COUPLER MI X C BF411098 3/8" X 10MM STRAIGHT COUPLER MI X C BF412001 1/2" X 15MM STRAIGHT COUPLER FI X C BF412002 3/4" X 22MM STRAIGHT COUPLER FI X C BF412003 1" X 28MM STRAIGHT COUPLER FI X C BF412018 1/2" X 10MM STRAIGHT COUPLER FI X C BF415001 15MM X 15MM ELBOW C X C BF415002 22MM X 22MM ELBOW C X C BF415003 28MM X 28MM ELBOW C X C BF415088 10MM X 10MM ELBOW C X C BF416001 1/2" X 15MM ELBOW MI X C BF416002 3/4" X 22MM ELBOW MI X C BF416003 1" X 28MM ELBOW MI X C BF416032 1" X 22MM ELBOW MI X C BF416098 3/8" X 10MM ELBOW MI X C BF417001 1/2" X 15MM ELBOW FI X C BF417002 3/4" X 22MM ELBOW FI X C BF417003 1" X 28MM ELBOW FI X C BF417032 1" X 22MM ELBOW FI X C BF418001 15MM C X C X C EQUAL TEE BF418002 22MM C X C X C EQUAL TEE BF418003 28MM C X C X C EQUAL TEE BF418211 22MM X 15MM X 15MM C X C X C RED. TEE BF418212 22MM X 15MM X 22MM C X C X C RED. TEE BF418221 22MM X 22MM X 15MM C X C X C RED. TEE BF418322 28MM X 22MM X 22MM C X C X C RED. TEE BF418332 28MM X 28MM X 22MM C X C X C RED. TEE BF418888 10MM TEE C X C X C

Approval Holder:

South Coast Sales

Company Name

South Coast Sales

Address

1 Doughcloyne Industrial Estate, Sarsfield Road, Wilton, Cork.

Postcode

T12 TR62

Country

Ireland

Phone

00353 21 - 43 46 143

General Email

info@southcoastsales.com

View All Listings by this Company

‘AF’ range of compression fittings with brass or chrome plated brass bodies for use with copper pipe (manufactured to EN1057). The AF14 and AF15 tap connector models incorporate an EPDM washer. Maximum working pressure 16.0 bar. Maximum working temperature 85˚C

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2204071

Size:

see model

Marking:

“DOZ” and Size on fitting body

Installation Requirements:

R001

Expiry date:

30/04/2027

Model:

AF01 couplings-cxc: 6 - 54mm compression. AF01B repair couplings-cxc: 6 - 54mm compression. AF01R reducing couplings cxc: 10 x 8mm compression, 12 x 8mm compression, 15 x 8mm compression, 12 x 10mm compression, 15 x 10mm compression, 15 x 12mm compression, 18 x 12mm compression, 16 x 15mm compression, 22 x 15mm compression, 28 x 15mm compression, 28 x 22mm compression, 35 x 28mm compression, 42 x 35mm compression, 54 x 42mm compression. AF02P female adaptors-parallel: 6mm compression, x ¼" BSP (F), 6mm compression, x ⅜" BSP (F), 8mm compression, x ⅜" BSP (F), 8mm compression, x ¼" BSP (F), 10mm compression, x ¼" BSP (F), 10mm compression, x ⅜" BSP (F), 10mm compression, x ½" BSP (F), 12mm compression, x ¼" BSP (F), 12mm compression, x ⅜" BSP (F), 12mm compression, x ½" BSP (F), 15mm compression, x ¼" BSP (F), 15mm compression, x ⅜" BSP (F), 15mm compression, x ½" BSP (F), 15mm compression, x ¾" BSP (F), 18mm compression, x ½" BSP (F), 22mm compression, x ½" BSP (F), 22mm compression, x ¾" BSP (F), 22mm compression, x 1" BSP (F), 28mm compression, x 1" BSP (F), 28mm compression, x ¾” BSP (F), 35mm compression, x 1-¼" BSP (F), 42mm compression, x 1-½" BSP (F), 54mm compression, x 2" BSP (F). AF03T male adaptors-CxMI taper: 6mm compression, x ¼" BSP (M), 6mm compression, x ⅜" BSP (M), 8mm compression, x ¼" BSP (M), 8mm compression, x ⅜" BSP (M), 8mm compression, x ½" BSP (M), 10mm compression, x ¼" BSP (M), 10mm compression, x ⅜" BSP (M), 10mm compression, x ½" BSP (M), 12mm compression, x ¼" BSP (M), 12mm compression, x ⅜" BSP (M), 12mm compression, x ½" BSP (M), 15mm compression, x ⅜" BSP (M), 15mm compression, x ¼" BSP (M), 15mm compression, x ½" BSP (M), 15mm compression, x ¾" BSP (M), 18mm compression, x ½" BSP (M), 22mm compression, x ½" BSP (M), 22mm compression, x ¾" BSP (M), 22mm compression, x 1" BSP (M), 28mm compression, x ¾" BSP (M), 28mm compression, x 1" BSP (M), 35mm compression, x 1-¼" BSP (M), 42mm compression, x 1-½" BSP (M), 54mm compression, x 2" BSP (M). AF03P male adaptors-CxMI parallel: 6mm compression, x ¼" BSP (M), 6mm compression, x ⅜" BSP (M), 8mm compression, x ¼" BSP (M), 8mm compression, x ⅜" BSP (M), 8mm compression, x ½" BSP (M), 10mm compression, x ¼" BSP (M), 10mm compression, x ⅜" BSP (M), 10mm compression, x ½" BSP (M), 12mm compression, x ¼" BSP (M), 12mm compression, x ⅜" BSP (M), 12mm compression, x ½" BSP (M), 15mm compression, x ⅜" BSP (M), 15mm compression, x ¼" BSP (M), 15mm compression, x ½" BSP (M), 15mm compression, x ¾" BSP (M), 18mm compression, x ½" BSP (M), 22mm compression, x ½" BSP (M), 22mm compression, x ¾" BSP (M), 22mm compression, x 1" BSP (M), 28mm compression, x ¾" BSP (M), 28mm compression, x 1" BSP (M), 35mm compression, x 1-¼" BSP (M), 42mm compression, x 1-½" BSP (M), 54mm compression, x 2" BSP (M). AF03P extended male adaptors-CxMI: 10mm compression, x ⅜" BSP (M), 12mm compression, x ⅜" BSP (M), 15mm compression, x ½" BSP (M), 22mm compression, x ¾" BSP (M), 28mm compression, x 1" BSP (M). AF04 tank connectors-lug style: 10 - 54mm compression. AF04N tank connectors-nut style: 10 - 54mm compression. AF05 elbows 90 degree-CxC: 6 - 54mm compression. 8 x 6mm compression, 10 x 8mm compression, 12 x 10mm compression, 15 x 12mm compression, 18 x 15mm compression, 22 x 15mm compression, 22 x 18mm compression, 28 x 22mm compression, 35 x 28mm compression, 42 x 35mm compression, 54 x 42mm compression, AF06T male elbows-CxMI taper: 6mm compression, x ¼" BSP (M), 6mm compression, x ⅜" BSP (M), 8mm compression, x ¼" BSP (M), 8mm compression, x ⅜" BSP (M), 10mm compression, x ¼" BSP (M), 10mm compression, x ⅜" BSP (M), 10mm compression, x ½" BSP (M), 12mm compression, x ¼" BSP (M), 12mm compression, x ⅜" BSP (M), 12mm compression, x ½" BSP (M), 15mm compression, x ¼" BSP (M), 15mm compression, x ⅜" BSP (M), 15mm compression, x ½" BSP (M), 15mm compression, x ¾" BSP (M), 18mm compression, x ½" BSP (M), 22mm compression, x ½" BSP (M), 22mm compression, x ¾" BSP (M), 22mm compression, x 1" BSP (M), 28mm compression, x ¾" BSP (M), 28mm compression, x 1" BSP (M), 35mm compression, x 1¼" BSP (M), 42mm compression, x 1½" BSP (M), 54mm compression, x 2" BSP (M). AF06P male elbows-CxMI parallel: 6mm compression, x ¼" BSP (M), 6mm compression, x ⅜" BSP (M), 8mm compression, x ¼" BSP (M), 8mm compression, x ⅜" BSP (M), 10mm compression, x ¼" BSP (M), 10mm compression, x ⅜" BSP (M), 10mm compression, x ½" BSP (M), 12mm compression, x ¼" BSP (M), 12mm compression, x ⅜" BSP (M), 12mm compression, x ½" BSP (M), 15mm compression, x ¼" BSP (M), 15mm compression, x ⅜" BSP (M), 15mm compression, x ½" BSP (M), 15mm compression, x ¾" BSP (M), 18mm compression, x ½" BSP (M), 22mm compression, x ½" BSP (M), 22mm compression, x ¾" BSP (M), 22mm compression, x 1" BSP (M), 28mm compression, x ¾" BSP (M), 28mm compression, x 1" BSP (M), 28mm compression, x 1-¼" BSP (M), 35mm compression, x 1-¼" BSP (M), 42mm compression, x 1-½" BSP (M), 54mm compression, x 2" BSP (M). AF07 female elbows-CxFI parallel: 6mm compression, x ¼" BSP (F), 6mm compression, x ⅜" BSP (F), 8mm compression, x ¼" BSP (F), 8mm compression, x ⅜" BSP (F), 10mm compression, x ¼" BSP (F), 10mm compression, x ½" BSP (F), 10mm compression, x ⅜" BSP (F), 12mm compression, x ¼" BSP (F), 12mm compression, x ⅜" BSP (F), 12mm compression, x ½" BSP (F), 15mm compression, x ¼" BSP (F), 15mm compression, x ⅜" BSP (F), 15mm compression, x ½" BSP (F), 15mm compression, x ¾" BSP (F), 18mm compression, x ½" BSP (F), 22mm compression, x ½" BSP (F), 22mm compression, x ¾" BSP (F), 22mm compression, x 1" BSP (F), 28mm compression, x ¾" BSP (F), 28mm compression, x 1" BSP (F), 28mm compression, x 1-¼" BSP (F), 35mm compression, x 1-¼" BSP (F), 42mm compression, x 1-½" BSP (F), 54mm compression, x 2" BSP (F). AF08 wallplate elbows-CxFI: 12mm compression, x ⅜" BSP (F), 15mm compression, x ½" BSP (F), 22mm compression, x ¾" BSP (F), 22mm compression, x ½" BSP (F), 28mm compression, x 1" BSP (F). AF08 equal tees-CxCxC: 6 - 54mm compression. AF08R reducing tees-CxCxC: 15 x 15 x 10mm compression, 15 x 15 x 22mm compression, 22 x 15 x 15mm compression, 22 x 15 x 22mm compression, 22 x 22 x 15mm compression, 22 x 22 x 28mm compression, 28 x 15 x 28mm compression, 28 x 22 x 28mm compression, 28 x 22 x 22mm compression, 28 x 28 x 15mm compression, 28 x 28 x 22mm compression, 35 x 35 x 15mm compression, 35 x 35 x 22mm compression, AF09 threaded centre teesCxCxFI: 15mm compression, x 15mm compression, x ¼" BSP (F), 15mm compression, x 15mm compression, x ½" BSP (F), 22mm compression, x 22mm compression, x ½" BSP (F), 22mm compression, x 22mm compression, x ¾" BSP (F), 28mm compression, x 28mm compression, x ¾" BSP (F), 28mm compression, x 28mm compression, x 1" BSP (F). AF10 threaded end tees CxFIxC: 15mm compression, x ½" BSP (F) x 15mm compression, 22mm compression, x ¾" BSP (F) x 22mm compression, AF12 stopends-C: 6 - 54mm compression. AF14 straight tap connectors: 15mm compression, x ½" BSP (F), 15mm compression, x ¾" BSP (F), 22mm compression, x ¾" BSP (F), 22mm compression, x 1" BSP (F). AF15 bent tap connectors: 15mm compression, x ½" BSP (F).

Product Images

Approval Holder:

Hangzhou DOZ Import & Export Co., Ltd

Company Name

Hangzhou DOZ Import & Export Co., Ltd

Address

Room 302, Binke Mansion, No. 1503, Xipu Road, Binjiang District, Hangzhou Zhejiang 310053

Country

China

Phone

86 571 28180555

View All Listings by this Company

Manufacturer:

Hangzhou DOZ Import & Export Co., Ltd

Company Name

Hangzhou DOZ Import & Export Co., Ltd

Address

Room 302, Binke Mansion, No. 1503, Xipu Road, Binjiang District, Hangzhou Zhejiang 310053

Country

China

Phone

86 571 28180555

View All Listings by this Company