Directory Search Results

Print List

#251155052

'ECOTRAN E2130W(#) BK'. Black coloured PPS material manufactured using Melt compounding method. For use with water up to 85°C.

Section:
5255 Polyphenylene Sulphide (PPS)
Expiry date:
30/11/2030

Approval Holder:
HDC POLYALL CO., Ltd.
Company Name
HDC POLYALL CO., Ltd.
Address
591-1, Sinhang-ro, Nam-gu, Ulsan
Country
Korea, Republic of

View All Listings by this Company

Print This Approval


#251055070

'RAMSET ChemSet™ Reo502™ Xtrem™’ & ‘RAMSET ChemSet™ Epcon™ G5 Xtrem™'. Site applied, brick coloured (once mixed), chemical anchor resins, each supplied in a pre-weighed dual cartridge. Apply as per manufacturer's instructions dated 'NOV. 25'. Cure for 24 hours@21°C. For use with water up to 23°C. For use only as a resin anchor having been tested at a reduced surface area to volume ratio of 1,000mm² per 1 litre of water. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:
5311 Resin Anchors
Expiry date:
31/10/2030

Approval Holder:
RAMSET (ITW Australia)
Company Name
RAMSET (ITW Australia)
Address
1 Ramset Drive, Chirnside Park, Vic 3116
Country
Australia

View All Listings by this Company

Print This Approval


#2203561

'Fernox LS-X'. Clear, silicone sealant. Apply as per manufacturer's technical data sheet dated 10-05-2021. Cure for 24 hours@23°C. For use with water up to 85°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:
5440 Sealants - Flat Faced Joints
Section Subtitle:
General.
WRAS Approval Number:
2203561
Expiry date:
31/03/2027

Approval Holder:
Fernox
Company Name
Fernox
Address
Unit 2, Genesis Business Park, Albert Drive, Sheerwater, Woking
Postcode
GU21 5RW

View All Listings by this Company

Print This Approval


#251104020

Range of single hole, single outlet (fixed) electronically controlled tap assemblies (either stainless steel or brass bodies in a variety of finishes). Flow is controlled via two solenoid valves activated via an infra-red sensor, the inlets to the control box incorporate stainless steel strainers. The temperature is controlled independently via a ceramic cartridge with a dome type operating member. The spout outlet incorporates a plastic aerator. Maximum operating pressure 8 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
251104020
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
15mm compression.
Marking:
DVS on body.
Installation Requirements:
R001 R010
Expiry date:
30/11/2030
Model:
AT02-001, AT02-002, AT02-003, AT02-005, AT02-006, AT02-011, AT02-012, AT02-013, AT02-015, AT02-016, AT02-021, AT02-022, AT02-023, AT02-025, AT02-026.

Approval Holder:
KWC DVS Ltd.
Company Name
KWC DVS Ltd.
Address
Kemmings Close, Long Road, Paignton, Devon
Postcode
TQ4 7TW
Country
United Kingdom
Phone
01246 458 900
General Email
richard.lamb@kwc.com

View All Listings by this Company

Print This Approval


#251202710

Bottom entry or side entry BS1212-4 (2016) compact type float operated inlet valve for WC flushing cisterns with a plastic body and a plastic flow regulator at the inlet. Maximum working pressure 10.0 Bar Cold water use

Section:
2075 Float Operated Inlet Valve
Section Subtitle:
Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.
WRAS Approval Number:
251202710
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
IRN R560 applies to the bottom entry model only
Size:
½” BSP (M)
Marking:
NAT logo and BS1212-4 on float , datum level on valve body.
Installation Requirements:
R001 R550 R560
Expiry date:
31/12/2030
Model:
NA206 AG Bottom Fill Valve NA306 AG Side Fill Valve

Approval Holder:
Xiamen Nat Plumbing Inc.
Company Name
Xiamen Nat Plumbing Inc.
Address
UNIT 2, 5TH FLR. NO.18‐8 XIAFEI ROAD, HAICANG DISTRICT, 361028 XIAMEN, P. R. CHINA
Country
China
Phone
86-592-6538317

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 618 of 640

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.