Directory Search Results

Print List

#2112357

Range of water meters with blue epoxy coated iron bodies and EPDM ‘O’-rings. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
1505 Water Meters
Size:
see model
Marking:
JET, Wolseley & Company details, WRAS approved and other technical information on dial.
Installation Requirements:
R001
Expiry date:
31/12/2026
Model:
171260 & 171280 – DN50 171261 & 171281 – DN65 171262 & 171282 – DN80 171263 & 171283 – DN100 171264 & 171284 – DN125 171265 & 171285 – DN150 171266 & 171286 – DN200
Product Images

Approval Holder:
Wolseley UK Ltd.
Company Name
Wolseley UK Ltd.
Address
2 Kingmaker Court, Warwick Technology Park, Warwick
Postcode
CV34 6DY
Country
United Kingdom
Phone
01926705792
General Email
martin.lister@wolseley.co.uk

View All Listings by this Company

Print This Approval


#2203314

Range of water meter manifolds with gun metal bodies and ball valve with either a quarter turn stop valve or screw down stop valve. The products incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 16.0 bar. Cold water use only.

Section:
1510 Water Meter Manifolds
WRAS Approval Number:
2203314
Note:
R008 applies to te plastic cap
Size:
see model
Marking:
Ebco logo, flow arrow, Foundry I.D. (QL) & date of manufacturer (MM/YY) on body.
Installation Requirements:
R001 R008
Expiry date:
31/03/2027
Model:
1" BSP (M) x ¾” BSP (F) models: MB1030403BM MB1030403EM MANI0461V MANI0461VW MANI0461VMCP20 MVB0250MCP40 MVB0240 MVB0241 MVB0250 MVB0255 ¾ BSP (F) x ¾” BSP (F) models: MBB0460V MBB0470V MBB0461V MBB0481V MBB0040V MBB0060V MVB0210 MVB0200 MVB0220 ¾” BSP (M) x ¾” BSP (M) models: MVB0020 MVB0030 MVB0040 MVB0045 1" BSP (M) x 1” BSP (M) MVB0230
Product Images

Approval Holder:
Atlantic Plastics Ltd.
Company Name
Atlantic Plastics Ltd.
Address
Coytraherne Close, Brackla, Bridgend
Postcode
CF31 2AX
Country
United Kingdom
Phone
01656672628
General Email
rhodgkiss@atplas.co.uk

View All Listings by this Company
Manufacturer:
Atlantic Plastics Ltd.
Company Name
Atlantic Plastics Ltd.
Address
Coytraherne Close, Brackla, Bridgend
Postcode
CF31 2AX
Country
United Kingdom
Phone
01656672628
General Email
rhodgkiss@atplas.co.uk

View All Listings by this Company

Print This Approval


#2203331

Permanent filling/ pressurisation device for primary heating and chilled water closed circuits in domestic and non-domestic premises. The mains and closed circuit system pressures are continuously checked by two pressure sensors and their differential monitored by microprocessors. In the event of a fall in system pressure, and only if the mains pressure is adequate, a solenoid valve operates to allow water into the system. At all other times a second solenoid valve drains the fill chamber to waste, via tundish (meeting the requirements of an air gap to drain), and allowing air to be admitted via an automatic air vent to create an atmospheric disconnection across the transfer chamber. Maximum working pressure 6.0 Bar. Cold water use only.

Section:
1530 Miscellaneous Fittings
WRAS Approval Number:
2203331
Note:
Suitable for backflow protection up to fluid category 3. Consult your water supplier prior to installation
Size:
½” BSP (M)
Marking:
Flamco on front case.
Installation Requirements:
R001
Expiry date:
31/03/2027
Model:
Flexfiller Direct G4.
Product Images

Approval Holder:
Flamco Limited
Company Name
Flamco Limited
Address
Washway Lane, St. Helens
Postcode
WA10 6PB
Phone
+44 (0) 1744 744 744
General Email
info@flamco.co.uk

View All Listings by this Company
Manufacturer:
Flamco Limited
Company Name
Flamco Limited
Address
Washway Lane, St. Helens
Postcode
WA10 6PB
Phone
+44 (0) 1744 744 744
General Email
info@flamco.co.uk

View All Listings by this Company

Print This Approval


#2203334

Spout end flow control device (aerator with ‘switchable’ spray formation). Maximum operating temperature 65°C.

Section:
1535 Miscellaneous
Section Subtitle:
Tap accessories.
WRAS Approval Number:
2203334
Note:
Open outlet use only
Size:
M24 threaded connection
Marking:
Neoperl on body
Installation Requirements:
R001 R040
Expiry date:
31/03/2027
Model:
01.3098.90 VarioDuo Aerator Model added April 2022: 01.3098.91 VarioDuo Aerator
Product Images

Approval Holder:
Neoperl GmbH
Company Name
Neoperl GmbH
Address
Klosterrunstrasse 9-11, Müllheim
Postcode
D-79379
Country
Germany
Phone
+49 7631 188 374
General Email
DE.Approvals@neoperl.com

View All Listings by this Company
Manufacturer:
Neoperl GmbH
Company Name
Neoperl GmbH
Address
Klosterrunstrasse 9-11, Müllheim
Postcode
D-79379
Country
Germany
Phone
+49 7631 188 374
General Email
DE.Approvals@neoperl.com

View All Listings by this Company

Print This Approval


#2203054

Range of multistage pumps with brass suction and discharge bodies, stainless steel housing, shaft and impeller, and EPDM ‘O’-rings and seals. Maximum working pressure: 6.0 bar (46553 - Stuart CH 4-30 & 46554 - Stuart CH 4-40 models) or 9.0 bar (46555 - Stuart CH 4-50 &46556 - Stuart CH 4-60 models). Maximum operating temperature 65°C.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
2203054
Size:
1¼” BSP (F) inlet x 1" BSP (F) outlet
Marking:
STUART TURNER, model number, maximum pressure and temperature and other technical information on adhesive label on body.
Installation Requirements:
R001 R415
Expiry date:
31/03/2027
Model:
46553 - Stuart CH 4-30 46554 - Stuart CH 4-40 46555 - Stuart CH 4-50 46556 - Stuart CH 4-60
Product Images

Approval Holder:
Stuart Turner Ltd
Company Name
Stuart Turner Ltd
Address
47 Market Place Henley-on-Thames Oxfordshire
Postcode
RG9 2AD
Country
United Kingdom
Phone
01491 572655
General Email
stuart.savill@stuart-turner.co.uk

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 617 of 2240

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.