Range of drain taps with brass or DZR brass body (some models chrome plated) and rising spindle headwork. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1770 Taps

Section Subtitle:

Draining, for above ground use only.

WRAS Approval Number:

240204067

Size:

see model

Marking:

CPS, size, date of manufacture (MM/YY) and WRAS on body. DZR brass models are also marked with CR.

Installation Requirements:

R001

Expiry date:

28/02/2029

Model:

Models with DZR brass body: 500341 (natural): 15mm tail. Models with HPb59-3 brass body: 961131 (natural): 15mm tail.

Approval Holder:

The Highbourne Group, City Plumbing Supplies

Company Name

The Highbourne Group, City Plumbing Supplies

Address

Branch Support Centre Highbourne House Highbourne House Crick Northampton

Postcode

NN6 7SL

Country

United Kingdom

Phone

07342 078865

General Email

Lindsey.cocks-stevens@cityplumbing.co.uk

View All Listings by this Company

Range of stainless-steel braided TPS lined flexible hose assemblies incorporating EPDM or fibre washers. The products can be supplied with a range of end connections and seals. Some models also incorporate integral isolation valves Push-fit fittings for use with: Copper Pipes manufactured in accordance with BS EN 1057 PB pipes manufactured in accordance with BS 7291-2 PEX pipes manufactured in accordance with BS 7291-3 Maximum working pressure 12.0 bar. Maximum operating temperature 65°C.

Section:

1860 Tubes

Section Subtitle:

Plastic hoses.

WRAS Approval Number:

240702058

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models

Marking:

Qualflex, QWRAS, year of manufacture (YY) and temperature and pressure on ferrule.

Installation Requirements:

R001 R008

Expiry date:

31/07/2029

Model:

06PP 08PP 10PP 12PP Plastic Qualflex Pushfit: 15mm - 22mm Polypipe Pushfit: 15mm & 22mm John Guest Pushfit: 15mm & 22mm Qualflex Valved Pushfit: 15mm - 22mm Flat faced Straight: 1/2" - 3/4" BSP captive nut Flat faced Straight: 1/2" - 3/4" BSP captive nut Standpipe: 6mm - 15mm Flat Faced Female Elbow: 3/4" BSP captive nut Retained Female Straight: 1/2" - 3/4" BSP captive nut Retained Female Straight: 1/2" - 3/4" BSP captive nut Retained Female Elbow: 3/4" BSP captive nut Brass Brass Pushfit: 10mm - 15mm Qualflex pushfit: 10mm - 22mm Compression with Iso Valve: 15 & 22mm Compression: 15mm - 28mm Flat Faced Straight: 3/8” - 1.1/4" BSP captive nut. Flat Faced Female Elbow: 3/8" - 1" BSP captive nut Retained Female Straight: 3/8" - 3/4" BSP captive nut. Retained Female Elbow: 3/8" - 3/4" BSP captive nut Coned Female Straight: 1/4" - 1/2" BSP captive nut Coned Female Elbow: 1/4" - 1/2" BSP captive nut Female Straight: 7/16" UNF Captive nut Male Straight: 1/4" - 1” BSP Male Straight: 3/8" NPT Standpipe: 3/8" & 10mm - 28mm Monoblock: M8, M10 & M12

Product Images

Approval Holder:

Hydralectric Group Ltd.

Company Name

Hydralectric Group Ltd.

Address

5 High Road, Byfleet, Surrey

Postcode

KT14 7QE

Country

United Kingdom

Phone

+44 1932 334 200

General Email

jamie.balkwill@hydralectric.com

View All Listings by this Company

Manufacturer:

Hydralectric Group Ltd.

Company Name

Hydralectric Group Ltd.

Address

5 High Road, Byfleet, Surrey

Postcode

KT14 7QE

Country

United Kingdom

Phone

+44 1932 334 200

General Email

jamie.balkwill@hydralectric.com

View All Listings by this Company

‘Qualflex Excel’ range of stainless steel over braided, PEX lined flexible hoses, incorporating EPDM or fibre washers. The products can be supplied with a range of end connections and seals. Some models also incorporate integral isolation valves. Push-fit fittings for use for with: Copper Pipes manufactured in accordance with BS EN 1057 Plastic PB pipes manufactured in accordance with BS 7291-2 Plastic PEX pipes manufactured in accordance with BS 7291-3 Maximum working pressure: 6.0 bar. Maximum operating temperature: 65°C.

Section:

1860 Tubes

Section Subtitle:

Plastic hoses.

WRAS Approval Number:

240702059

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

Qualflex, QWRAS, year of manufacture (YY) and temperature and pressure on ferrule.

Installation Requirements:

R001 R008

Expiry date:

31/07/2029

Model:

06PEX 08PEX 10PEX 12PEX Plastic Qualflex Pusfit: 15 - 22mm Polypipe Pushfit: 15 & 22mm John Guest Pushfit: 15 & 22mm Qualflex Valved Pushfit: 15 - 22mm Flat faced Straight: 1/2" & 3/4" BSP captive nut Flat faced Straight: 1/2" & 3/4" BSP captive nut Standpipe: 6mm - 15mm Flat Faced Female Elbow: 3/4" BSP captive nut Retained Female Straight: 1/2" & 3/4" BSP captive nut Retained Female Straight: 1/2" & 3/4" BSP captive nut Retained Female Elbow: 3/4" BSP captive nut Brass Pushfit: 10mm - 15mm Qualflex pushfit: 10mm - 22mm Compression with Iso Valve: 15 & 22mm Compression: 15 - 28mm Flat Faced Straight: 3/8” - 1.1/4" BSP captive nut. Flat Faced Female Elbow: 3/8" - 1" BSP captive nut Retained Female Straight: 3/8" - 3/4" BSP captive nut. Retained Female Elbow: 3/8" - 3/4" BSP captive nut Coned Female Straight: 1/4" - 1/2" BSP captive nut Coned Female Elbow: 1/4" - 1/2" BSP captive nut Female Straight: 7/16" UNF Captive nut Male Straight: 1/4" - 1” BSP Male Straight: 3/8" NPT Standpipe: 3/8" & 10mm - 28mm Monoblock: M8, M10 & M12

Approval Holder:

Hydralectric Group Ltd.

Company Name

Hydralectric Group Ltd.

Address

5 High Road, Byfleet, Surrey

Postcode

KT14 7QE

Country

United Kingdom

Phone

+44 1932 334 200

General Email

jamie.balkwill@hydralectric.com

View All Listings by this Company

Inlet hose consisting of a EPDM inner hose layer and corrugated outer cover. The hose is fitted with an integral device consisting of a water sensitive material which expands when in contact with water. Maximum working pressure 10.0 bar. Maximum operating temperature 90°C.

Section:

1860 Tubes

Section Subtitle:

Plastic hoses.

WRAS Approval Number:

240704011

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Any anti-flooding claims made by the manufacturer have not been verified by test and are covered by this approval).

Size:

¾” BSP captive nut

Marking:

Wuxi Jinhua, Model, WRAS, date of manufacture (YYYY) etched on hose cover.

Installation Requirements:

R001 R150

Expiry date:

31/07/2029

Model:

GJS-FL-115HW - Aquastop inlet hose.

Product Images

Approval Holder:

Wuxi Jinhua Yiyuan Technology Co.,Ltd.

Company Name

Wuxi Jinhua Yiyuan Technology Co.,Ltd.

Address

No. 3, Industrial Park Binhu District Wuxi City Jiangsu Province

Country

China

View All Listings by this Company

Manufacturer:

Wuxi Jinhua Yiyuan Technology Co.,Ltd.

Company Name

Wuxi Jinhua Yiyuan Technology Co.,Ltd.

Address

No. 3, Industrial Park Binhu District Wuxi City Jiangsu Province

Country

China

View All Listings by this Company

Range of stainless steel, stainless steel with nylon or nylon braided, EPDM lined hose assemblies. Some models incorporate servicing valves. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2103349

Size:

DN 6 (denoted by 06) bore diameter availble with the following end connections: 01= F1/4 02= F1/4 elbow 03= M1/4 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 19= M8*(12-110) with single O-ring 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 26= F15 29=10mm Compression fitting 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (used with copper tube manufactured to BS2871) 40=12mm pushfit isolation valve (used with copper tube manufactured to BS2871) 41=15mm pushfit isolation valve (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871) 45= M8*(12‐110) with double O‐ring 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring DN8 (denoted by 08) bore diameter availble with the following end connections: 03= M1/4 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 19= M8*(12-110) with single O-ring 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 26= F15 27=15mm smooth tube 29=10mm Compression fitting 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (used with copper tube manufactured to BS2871) 40=12mm pushfit isolation valve (used with copper tube manufactured to BS2871) 41=15mm pushfit isolation valve (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871) 43= F1/2 plastic nut 44= F3/4 plastic nut 45= M8*(12‐110) with double O‐ring 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN10 (denoted by 10) bore diameter availble with the following end connections: 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 27=15mm smooth tube 28=22mm smooth tube 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (for use with copper tube) 40=12mm pushfit isolation valve (for use with copper tube) 41=15mm pushfit isolation valve (for use with copper tube) 42=22mm pushfit isolation valve (for use with copper tube) 43= F1/2 plastic nut 44= F3/4 plastic nut 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN13 (denoted by 13) bore diameter availble with the following end connections: 04= F3/8 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 27=15mm smooth tube 28=22mm smooth tube 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 37=15mm pushfit (for use with copper tube) 38=22mm pushfit (for use with copper tube) 41=15mm pushfit isolation valve (for use with copper tube) 42=22mm pushfit isolation valve (for use with copper tube) 43= F1/2 plastic nut 44= F3/4 plastic nut 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN19 (denoted by 09) bore diameter availble with the following end connections 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 28=22mm smooth tube 32=22mm compression fitting 34=22mm isolation valve 38=22mm pushfit (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871)

Marking:

Justlink (tradename of manufacturer), WRAS and year of manufacture (YYYY) on ferrule.

Installation Requirements:

R001

Expiry date:

31/03/2026

Model:

316637 15MMXM10X30CM DN8 898868 15MMXM12X30CM DN10 122259 F3/8”X15MM X 30CM DN10 500898 F1/2”X15MM X 30CM DN10 500903 F1/2”X15MM X 50CM DN10 114103 F1/2”X15MM X 100CM DN10 695025 F3/4”X15MM X 30CM DN10 897397 F3/4”X15MM X 50CM DN10 509861 F3/4”X15MM X 100CM DN10 313144 15MM X15MM X 30CM DN10 508022 15MM X15MM X 50CM DN10 509802 15MM X15MM X100CM DN10 506150 F3/4”X22MM X 30CM DN13 507681 F3/4”X22MM X 50CM DN13 116063 F3/4”X22MM X 100CM DN13 316628 22MM X22MM X 30CM DN13 316600 22MM X22MM X 50CM DN13 699046 F1/2”X15MM ISO VALVE X 30CM DN10 307096 F1/2”X15MM ISO VALVE X 50CM DN10 306887 F3/4”X22MM ISO VALVE X 30CM DN13 897436 F3/4”X22MM ISO VALVE X 50CM DN13

Approval Holder:

Travis Perkins PLC

Company Name

Travis Perkins PLC

Address

Ryehill House Rye Hill Close Lodge Farm Industrial Estate Northampton

Postcode

NN5 7UA

Country

United Kingdom

Phone

07392109053

General Email

benjamin.cockerill@travisperkins.co.uk

View All Listings by this Company

Manufacturer:

Yuhuan Jianglin Plumbing Hose & Parts Inc.

Company Name

Yuhuan Jianglin Plumbing Hose & Parts Inc.

Address

2 Jindifu Road Yuhuan Economic Development Zone Yuhuan

Postcode

317600

Country

China

Phone

86-576-89901684

General Email

coo@cnjianglin.com

View All Listings by this Company