Directory Search Results

Print List

#240502715

Range of wall mounted combination boilers providing domestic hot water via a plate heat exchanger and pressurised central heating system. The primary circuit incorporates a pressure relief valve set at 3.0 bar and an expansion vessel. The products are supplied with isolation valve on both the DHW and CH circuits. The secondary circuit (DHW) incorporates a plastic flow restrictor and stainless-steel strainer. Some models (see model section) are supplied with a filling loop assembly consisting of an in-line isolation valve, an in-line double check valve assembly which incorporates an isolation valve. Maximum working pressures: DHW: 10.0 Bar CH: 2.5 Bar Maximum operating temperature: DHW: 65.0°C CH: 85.0°C

Section:
1465 Heaters
Section Subtitle:
Combination boilers and Water Jacketed Tube heaters. Low volume water content. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within the system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.
WRAS Approval Number:
240502715
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
DHW: 15mm compression. CH: 22mm compression
Marking:
Range name on front cover, Model, Max pressure, Max temperature and product information on data plate on body
Installation Requirements:
R001 R140 R360
Expiry date:
31/05/2029
Model:
Models without a filing loop supplied: 0010016113 - Glow-worm ESSENTIAL 24c -A (H-GB) 0010016115 - Glow-worm ESSENTIAL 28c -A (H-GB) 0010016127 - Heatline CAPRIZ 2 24c -A (H-GB) 0010016128 - Heatline MONZA 2 24c -A (H-GB) 0010016129 - Heatline CAPRIZ 2 28c -A (H-GB) 0010016130 - Heatline MONZA 2 28c -A (H-GB) 0010021401 - Glow-worm EASICOM 3 24c -A (H-GB) 0010021402 - Glow-worm EASICOM 3 28c -A (H-GB) 0010020392 - Vaillant VUW 256/6-3 (H-GB) ecoFIT sustain 825 0010020393 - Vaillant VUW 306/6-3 (H-GB) ecoFIT sustain 830 0010020394 - Vaillant VUW 356/6-3 (H-GB) ecoFITsustain 835 Models with a filling loop supplied: 0010020389 - Vaillant VUW 256/6-3 (H-GB) ecoFIT pure 825 0010020390 - Vaillant VUW 306/6-3 (H-GB) ecoFIT pure 830 0010020391 - Vaillant VUW 356/6-3 (H-GB) ecoFIT pure 835 0010019813 - Vaillant VUW 306/6-3 (P-GB) ecoFIT pure 830 P 0010021204 - Glow-worm BETACOM 4 24c -A (H-GB) 0010021205 - Glow-worm BETACOM 4 30c -A (H-GB) 0010021404 - Glow-worm ULTIMATE 3 30c -A (H-GB) 0010021405 - Glow-worm ULTIMATE 3 35c -A (H-GB) 0010027591 - Glow-worm ENERGY 2 30c -A (P-GB) 0010035896 - Glow-worm ENERGY 7 25c (H-GB) 0010035897 - Glow-worm ENERGY 7 30c (H-GB) 0010035898 - Glow-worm ENERGY 7 35c (H-GB)
Product Images

Approval Holder:
Vaillant GmbH
Company Name
Vaillant GmbH
Address
Berghauser Strasse, 40 D-42859 Remscheid
Country
Germany
Phone
Tel: +49 2191 182126

View All Listings by this Company

Print This Approval


#240502720

Range of wall mounted combination boilers providing domestic hot water (DHW) via a plate heat exchanger and pressurised central heating (CH) system. Incorporating a pressure relief valve set at 3.0 bar and expansion vessel. Supplied with a filling loop assembly consisting of an in-line isolation valve, an in-line double check valve assembly which incorporates an isolation valve. Maximum working pressure Primary circuit (CH) 2.5Bar, Secondary circuit (DHW) 10.0 Bar Maximum operating temperature 90.0°C

Section:
1465 Heaters
Section Subtitle:
Combination boilers and Water Jacketed Tube heaters. Low volume water content. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within the system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.
WRAS Approval Number:
240502720
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Primary circuit (CH) ¾” BSP (M), Secondary circuit (DHW) ½” BSP (M).
Marking:
NAVIEN on front of boiler. NAVIEN, Model Number, Max Pressure and other technical info on adhesive label on body
Installation Requirements:
R001 R140 R360
Expiry date:
31/05/2029
Model:
NCB300-28K NCB300-37K NCB300-41K Model added July 2024 NCB300-30K
Product Images

Approval Holder:
KD Navien Co Ltd
Company Name
KD Navien Co Ltd
Address
4F Koami Bldg, 22 Gukhoe daero, 76-gil, Yeongdeungpo-gu, Seoul, 07238 Korea
Phone
+82 2 3489 2200
General Email
www.navien.com

View All Listings by this Company
Manufacturer:
KD Navien Co Ltd
Company Name
KD Navien Co Ltd
Address
4F Koami Bldg, 22 Gukhoe daero, 76-gil, Yeongdeungpo-gu, Seoul, 07238 Korea
Phone
+82 2 3489 2200
General Email
www.navien.com

View All Listings by this Company

Print This Approval


#240404044

Ultrims Ultrasonic range of in-line water meters with brass or plastic (-01 suffix models) bodies. Maximum working pressure 16.0 bar. Maximum operating temperature 50°C.

Section:
1505 Water Meters
Size:
UL 2.5 & UL 2.5-01 models: ¾” BSP (M). UL 4 & UL 4-01 models: 1” BSP (M). UL 6,3 model: 1¼” BSP (M). UL 25 model: DN50 flanged connection.
Marking:
Powogaz logo, manufacturer’s address and year (YYYY), CE Mark, meter type and other technical information on meter face. Flow arrow on body.
Installation Requirements:
R001
Expiry date:
30/04/2029
Model:
Ultrims range: UL 2.5 (port lengths 80, 110 & 165mm), UL 2.5-01 (port lengths 80 & 110mm), UL 4 (port lengths 105, 115, 130 & 190mm), UL 4-01 (port lengths 105 & 130mm), UL 6.3 (port lengths 165 & 260mm), UL 25 (port lengths 200, 270 & 300mm). Models added November 2024: Ultrims Range: UL10 (port length 260mm) UL16 (port length 300mm) Ultrims Neo Range: ULN2.5 (port lengths 80, 110, 115 & 165mm) ULN2.5-01 (port lengths 80, 110 & 165mm) ULN4 (port lengths 105, 115, 130 & 190mm) ULN4-01 (port lengths 105, 115 & 130mm) Models Added April 2025: Ultrimis Neo 6,3 Ultrasonic water meter with brass body. DN25 - Body length [mm]: 165, 260 - G1 ¼ B. Ultrimis Neo 10 Ultrasonic water meter with brass body. DN32 - Body length [mm]: 260 - G1 ½ B Ultrimis Neo 16 Ultrasonic water meter with brass body. DN40 - Body length [mm]: 300 - G2 B Ultrimis Neo 25 Ultrasonic water meter with brass body. DN50 - Body length [mm]: 200, 270, 300 – flanged.
Product Images

Approval Holder:
Apator Powogaz S.A.
Company Name
Apator Powogaz S.A.
Address
Jaryszki 1c Jaryszki
Postcode
62-023 Żerniki
Country
Poland
Phone
+48 789 454 593
General Email
przemyslaw.gretka@apator.com

View All Listings by this Company
Manufacturer:
Apator Powogaz S.A.
Company Name
Apator Powogaz S.A.
Address
Jaryszki 1c Jaryszki
Postcode
62-023 Żerniki
Country
Poland
Phone
+48 789 454 593
General Email
przemyslaw.gretka@apator.com

View All Listings by this Company

Print This Approval


#240502051

Octave range of water meters with blue epoxy coated cast iron or plastic bodies (see models). Maximum working pressure 16.0 Bar. Maximum operating temperature 50.0°C

Section:
1505 Water Meters
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See models
Marking:
13905XXX & 13915XXX - Flow arrow on body. ARAD logo, DN, product information and model range on label under the plastic lid. 139XXXXX - Flow arrow and size on body. ARAD logo, product information and model range on label under the plastic lid.
Installation Requirements:
R001
Expiry date:
31/05/2029
Model:
OCTAVE range: 13905XXX (Composite Body, 2" BSP (M)) 13915XXX (Composite Body, 2.1/4" BSP (M)) 139XXXXX (Iron Body, 2” to 12”) 13905 & 13915: Where the XXX denotes customer specifications, e.g. flow rate, ration, packaging or logistic specifications. 139XXXXX: Where the 1st X denotes the size, and can be replaced with any of the following: 1 = 2” Flanged, 2 = 2.1/2” Flanged, 3 = 3” Flanged, 4 = 4” Flanged, 5 = 6” Flanged, 6 = 8” Flanged, 7 = 10” Flanged, 8 = 12” Flanged, Where the 2nd X denotes body type and customer specific and can be replaced with any of the following: 5 = Composite body, All other numbers = Customer specific Where the 3rd, 4th and 5th X’s denotes customer specifications, e.g. flow rate, ration, packaging or logistic specifications.
Product Images

Approval Holder:
Arad GROUP Ltd.
Company Name
Arad GROUP Ltd.
Address
Kibbutz Dalia 1923900 Kibutzz Dalia
Country
Israel
Phone
+972-4-9897906
General Email
Dars@arad.co.il

View All Listings by this Company
Manufacturer:
Arad GROUP Ltd.
Company Name
Arad GROUP Ltd.
Address
Kibbutz Dalia 1923900 Kibutzz Dalia
Country
Israel
Phone
+972-4-9897906
General Email
Dars@arad.co.il

View All Listings by this Company

Print This Approval


#240502057

‘Helvatron H2O’ range of ultrasonic water meters with brass bodies and EPDM ‘O’-rings. Maximum working pressure 16.0 bar. Maximum operating temperature 50°C.

Section:
1505 Water Meters
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See model.
Marking:
Helvatron on cap. Helvatron and product info on meter face. Size and flow arrow on body.
Installation Requirements:
R001
Expiry date:
31/05/2029
Model:
Helvatron H2O range: H2O DN15 (port lengths 115 & 165mm): ¾” BSP (M) inlet/outlet, H2O DN20 (port lengths 130, 190 & 195mm): 1” BSP (M) inlet/outlet, H2O DN25 (port lengths 225 & 260mm): 1¼” BSP (M) inlet/outlet, H2O DN32 (port lengths 230 & 260mm): 1½” BSP (M) inlet/outlet, H2O DN40 (port lengths 245 & 300mm): 2” BSP (M) inlet/outlet.
Product Images

Approval Holder:
Helvatron AG
Company Name
Helvatron AG
Address
JOCHLERWEG 2 CH-6340 BAAR SWITZERLAND

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 603 of 800

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.