Directory Search Results

Print List

#2210333

Ultra violet disinfection units consisting of a stainless steel body and quartz sleeve. Model WS-10-1206/3030031 Alde Aquaclear has a maximum working pressure of 5.0 bar and a maximum operating temperature of 40°C. All other models have a maximum working pressure of 7.0 bar and a maximum operating temperature of 60°C.

Section:
2411 Disinfection Equipment
Size:
¼” BSP (F).
Marking:
Watersprint, model, flow arrow & other tech info on body.
Installation Requirements:
R001 R120 R150 R170 R290
Expiry date:
31/10/2027
Model:
WS-10-1206/3030031 Alde Aquaclear. WS-10-1210 Purify SOLO-10. WS-10-1220 Purify SOLO-20. WS-10-1230 Purify SOLO-30. WS-10-1240 Purify SOLO-40.
Product Images

Approval Holder:
Watersprint AB
Company Name
Watersprint AB
Address
Medicon Village, Scheeletorget 1 223 81 Lund
Country
Sweden

View All Listings by this Company

Print This Approval


#2104077

Range of ion exchange water softeners (salt regenerated) for domestic use. Maximum working pressure 6.0 bar. Cold water use only.

Section:
2450 Water softeners
Size:
¾” BSP (M) inlet/outlet or 1” BSP (M) inlet/outlet
Marking:
Monarch, model and other product info on adhesive label on rear of body.
Installation Requirements:
R001 R150 R170 R290 R415
Expiry date:
30/04/2026
Proviso:
Discharge to drain must be via a type `AA`, `AB` or `AD` air gap in accordance with EN1717.
Model:
Mini Aqua HE CS100HE PROSOFT100HE EVER 9 Midi HE CS150HE PROSOFT150HE EVER 12 Master HE CS200HE PROSOFT200HE EVER 18 Matrix HE CS300HE PROSOFT300HE EVER 30 Plumbsoft SE-11 Monarch MC-11 Plumbsoft SE-14 Monarch MC-14 Plumbsoft SE-23 Monarch MC-23 Plumbsoft SE-30 Monarch MC-30 PS12 HE PS15 HE GS4000 HE GS6000 HE LPS HE PROSOF 120 XE PROSOFT 120 XE PROSOF 160 XE PROSOFT 160 XE PROSOF 350 XE PROSOFT 350 XE SOF3000HE SOF6000HE

Approval Holder:
Monarch Water Ltd
Company Name
Monarch Water Ltd
Address
Fair Green Diss Norfolk
Postcode
IP22 4DG
Country
United Kingdom
Phone
01986 784759
General Email
kdelaney@monarchwater.co.uk

View All Listings by this Company

Print This Approval


#2212508

'Valve Green Powder Coating Pulver 010'. Factory applied, green coloured epoxy resin coating. Apply as per manufacturer's data sheet ‘FR.07.03.18 Rev. 01 08.03.2021', issued '30.03.2022'. Cure for 10 minutes@160°C. For use with water up to 85°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:
5030 Coatings, Paints & Linings
Section Subtitle:
Factory applied pipe & fittings coatings.
WRAS Approval Number:
2212508
Expiry date:
31/12/2027

Approval Holder:
Pulver Kimya San. Ve Tic. S.A.
Company Name
Pulver Kimya San. Ve Tic. S.A.
Address
Inonu Mah Genclik Cad No 219 P.K.66 Gebze Kocaeli
Country
41400 Turkey
Phone
+90 262 6430001
General Email
pulver@pulver.com.tr

View All Listings by this Company

Print This Approval


#2209543

'SPL Gold Sulphate Resisting Portland Cement'. Factory applied, grey coloured Sulphate Resisting Portland Cement. Mix cement, sand and water in a 1.0:1.4:0.35 mass ratio and apply as per manufacturer's work instructions document code 'WI/SP/FINC&B/02', issue '06'. Cure for 24 hours at 27°C & 70% RH. For use with water up to 60°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:
5030 Coatings, Paints & Linings
Section Subtitle:
Factory applied pipe & fittings coatings.
WRAS Approval Number:
2209543
Expiry date:
30/09/2027

Approval Holder:
Electrosteel Castings Limited
Company Name
Electrosteel Castings Limited
Address
Rachagunneri Village, Srikalahsathi Mandal, Tirupati District, Andhra Pradesh - 517641
Country
India

View All Listings by this Company

Print This Approval


#2210511

'OP-90601' (orange coloured) & 'IP-90604' (light orange coloured). Injection moulded polyester materials. For use with water up to 50°C.

Section:
5217 Polyester
Section Subtitle:
Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2210511
Expiry date:
31/10/2027

Approval Holder:
Hitech Industries FZCO
Company Name
Hitech Industries FZCO
Address
Jebel Ali Free Zone, Near Roundabout 10, PO Box 16819
Country
Dubai

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 603 of 1708

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.