Wall mounted two hole, double outlet (swivel) combination tap assembly (chromium plated brass) with quarter turn ceramic disc headworks and single lever type operating members. The product is supplied with plastic back nuts. Maximum operating pressure 10.0 bar. Maximum operating temperature 65°C.

Section:

0570 Combination Tap Assemblies

Section Subtitle:

Two hole tap(s) with a double outlet and a swivel spout.

WRAS Approval Number:

2104801

Size:

½” BSP (M)

Marking:

DTC34 (brand of Methven) on rear of body.

Installation Requirements:

R001 R040

Expiry date:

30/04/2026

Model:

DLV305WM

Approval Holder:

Methven UK Limited

Company Name

Methven UK Limited

Address

3-3A Stone Cross Court Yew Tree Way Golborne Warrington

Postcode

WA3 3JE

Country

United Kingdom

Phone

0800 195 1602

General Email

raluca.olariu@uk.methven.com

View All Listings by this Company

Range of two hole, double outlet (swivel) combination tap assemblies (chromium plated brass). Incorporating quarter turn ceramic disc headworks and single lever (T-695-H1 & T-695-H2) or non-rising spindle headworks and cross top or dome type operating members (T-695M-H1, T-695M-H2, T-695M-H3, T-695M-H4 & T-695M-H5). The spout outlet incorporates a plastic flow straightener. Supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C

Section:

0570 Combination Tap Assemblies

Section Subtitle:

Two hole tap(s) with a double outlet and a swivel spout.

WRAS Approval Number:

2007351

Size:

½” BSP Inlet

Marking:

T.K. on back of body

Installation Requirements:

R001 R006 R010

Expiry date:

31/07/2025

Model:

T-695-H1, T-695-H2, T-695M-H1, T-695M-H2, T-695M-H3. T-695M-H4 & T-695M-H5

Product Images

Approval Holder:

Tsangkuo Industrial Co Ltd

Company Name

Tsangkuo Industrial Co Ltd

Address

27 Lane 22, Chang Ting Road, Lukang

Country

Chang Hua,

View All Listings by this Company

Two hole, wall mounted, double outlet (swivel) combination tap assembly (chromium plated brass). Incorporating rising spindle headworks on the tap body controlling the supply to the pull out hand held pre rinse outlet. An additional rising spindle headwork with a cross top operating member controls the flow to the spout outlet. Maximum working pressure 8.6 bar. Maximum operating temperature 85°C.

Section:

0570 Combination Tap Assemblies

Section Subtitle:

Two hole tap(s) with a double outlet and a swivel spout.

WRAS Approval Number:

2010358

Size:

¾” BSP (F)

Marking:

Encore logo (brand of CHG Europe B.V), series ID, material batch ID number on body.

Installation Requirements:

R001 R010 R040

Expiry date:

31/10/2025

Model:

KWP34-1014-FGEU

Product Images

Approval Holder:

CHG Europe B.V.

Company Name

CHG Europe B.V.

Postcode

THE NETHERLANDS

View All Listings by this Company

Three-hole, single outlet, fixed combination tap assembly with a brass body (various finishes), incorporating quarter turn ceramic disc headwork with single lever operating members. The spout outlets incorporate a plastic aerator and the products are supplied with lever type pop-up waste and metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0650 Combination Tap Assemblies

Section Subtitle:

Three hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

2011010

Size:

Stainless steel braided, thermoplastic silicone rubber (TPSiV) lined flexible hose with 3/8” BSP captive nut.

Marking:

Hansgrohe on body.

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/11/2025

Model:

31 073 xxx Hansgrohe Metris Classic 3-hole basin mixer 100 with pop-up waste set. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Product Images

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Range of three-hole, concealed, metal, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating quarter turn ceramic disc headwork with wheel, dome, cross top or single lever operating members. The spout outlet comes in various lengths and incorporates a plastic aerator. Maximum working pressure 3.0 bar. Maximum operating temperature 60°C.

Section:

0650 Combination Tap Assemblies

Section Subtitle:

Three hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

2011036

Size:

½” BSP (F)

Marking:

Oioli on operating member

Installation Requirements:

R001 R010 R040

Expiry date:

30/11/2025

Model:

5th Avenue series 22563/A-050, 22563/A-051, 22563/A-052, 22563/A-053, 22564/A-050, 22564/A-051, 22564/A-052 & 22564/A-053. Micro series 20563 & 20564. Micro 80 series 22864. Miami series 80202/A.

Product Images

Approval Holder:

Oioli Rubinetterie

Company Name

Oioli Rubinetterie

View All Listings by this Company

Two hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating non-rising spindle headwork with cross top operating members and manually operated diverter to shower outlet. The spout outlet incorporates a plastic flow straightener (optional aerator is also supplied) and the product is supplied with a shower hose, shower handset and metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0681 Combination Tap Assemblies

Section Subtitle:

Miscellaneous.

WRAS Approval Number:

2010305

Size:

¾” BSP (M).

Marking:

Burlington Brands on indice on operating member.

Installation Requirements:

R001 R006 R020

Expiry date:

31/10/2025

Model:

CL15 – Burlington Claremont deck bath shower mixer

Product Images

Approval Holder:

Bathroom Brands Group Ltd.

Company Name

Bathroom Brands Group Ltd.

Postcode

DA1 5FU

Country

United Kingdom

Phone

01322 475 739

General Email

David.Cheshire@bathroombrands.com

View All Listings by this Company

Range of cylindrical expansion vessels incorporating butyl rubber diaphragms. The products are supplied with an Airfix TD T piece. Maximum working pressure of model Airfix D 35 litre is 8.0 bar. All other models have a maximum working pressure of 10.0 bar. Maximum operating temperature 100°C.

Section:

1000 Expansion Vessels

WRAS Approval Number:

2009016

Note:

Expansion vessels should be installed in the vertical orientation and located so as to minimise the length of any connecting pipework. This product has not been tested or approved for anti-legionella claims made by the approval holder.

Size:

¾” BSP (F) x ¾” BSP (F) x ¾” BSP (F) tee piece connection

Marking:

Airfix, Flamco and technical information on adhesive label on body.

Installation Requirements:

R001

Expiry date:

30/09/2025

Model:

Airfix D 8 litre, 12 litre, 18 litre, 25 litre & 35 litre.

Product Images

Approval Holder:

Flamco Limited

Company Name

Flamco Limited

Address

Washway Lane, St. Helens

Postcode

WA10 6PB

Phone

+44 (0) 1744 744 744

General Email

info@flamco.co.uk

View All Listings by this Company

Manufacturer:

Flamco BV

Company Name

Flamco BV

Address

Amersfoortseweg 9 3750 GM Bunschote Nederland

Phone

+31 182 591800 Fax: +31 182 522557

General Email

info@flamco.nl

View All Listings by this Company

Range of press fittings incorporating copper or copper alloy bodies and EPDM O’-rings for use with copper tube to EN1057. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2010316

Size:

See model.

Marking:

Conex logo >B< on body

Installation Requirements:

R001

Expiry date:

31/10/2025

Model:

Copper alloy: PIR4090G; - Threaded Elbow PIR4090G040400 – ½” x ½” BSP (M) PIR4090G060600 – ¾” x ¾” BSP (M) PIR4092G; - Press Elbow PIR4092G040400 – ½” x ½” BSP (M) PIR4092G060600 – ¾” x ¾” BSP (M) PIR4243G; - Male Adaptor PIR4243G040400 – ½” x ½” BSP (M) PIR4243G040600 – ½” x ¾” BSP (M) PIR4243G060400 – ¾” x ½” BSP (M) PIR4243G060600 – ¾” x ¾” BSP (M) PIR4243G080600 – 1” x ¾” BSP (M) PIR4243G080800 – 1” x 1” BSP (M) PIR4471G; - Female Wallplate Elbow PIR4471G040400 – ½” x ½” BSP (M) PIR4471G060600 – ¾” – ¾” BSP (M) PIR4473G; - Male Wall plate Elbow PIR4473G040400 – ½” BSP (M) PIR4270G; - Female Adaptor PIR4270G040400 – ½” x ½” BSP (M) PIR4270G060600 – ¾” x ¾” BSP (M) PIR4270G080800 – 1” x 1” BSP (M Copper: PIR5040; - 45° Street Elbow PIR5040 040000 – ½” BSP (M) PIR5040 060000 – ¾” BSP (M) PIR5040 080000 – 1” BSP (M) PIR5001; - 90° Street Bend PIR5001 040000 – ½” BSP (M) PIR5001 060000 – ¾” BSP (M) PIR5001 080000 – 1” BSP (M) PIR5240; - Reducing Coupler PIR5240 060400 – ¾” x ½” BSP (M) PIR5240 080400 – 1” x ½” BSP (M) PIR5240 080600 – 1” x ¾” BSP (M) PIR5130; - Tee Reduced PIR5130 060604 – ¾” x ¾” x ½” BSP (M) PIR5002; - 90° Bend PIR5002 040000 – ½” BSP (M) PIR5002 060000 – ¾” BSP (M) PIR5002 080000 – 1” V PIR5041; - 45° Elbow PIR5041 040000 – ½” BSP (M) PIR5041 060000 – ¾” BSP (M) PIR5041 080000 – 1” BSP (M) PIR5130; - Equal Tee PIR5130 040000 – ½” BSP (M) PIR5130 060000 – ¾” BSP (M) PIR5130 080000 – 1” BSP (M) PIR5270; - Coupler PIR5270 040000 – ½” BSP (M) PIR5270 060000 – ¾” BSP (M) PIR5270 080000 – 1” BSP (M) PIR5301; – Stop End PIR5301 040000 – ½” BSP (M) PIR5301 060000 – ¾” BSP (M) PIR5301 080000 – 1” BSP (M) PIR5130RB; - Tee Reduced Branch PIR5130 060406 – ¾” x ½” x ¾” BSP (M) PIR5130 080408 – 1” x ½” x 1” BSP (M) PIR5130 080608 – 1” x ¾” x 1” BSP (M) PIR5275; - Slip Coupler PIR5275 040000 – ½” BSP (M) PIR5275 060000 – ¾” BSP (M) PIR5275 080000 – 1” BSP (M) PIR5243; - Fitting Reducer PIR5243 060400 – ¾” x ½” BSP (M) PIR5243 080400 – 1” x ½” BSP (M) PIR5243 080600 – 1” x ¾” BSP (M) PIR5130REB - Tee Reduced End & Branch PIR5130 060404 – ¾” x ½” x ½” BSP (M) Models added February 2021: PIR5130 080806 – 1” X 1” X ¾” BSP (M) PIR5130 040604 – ½” X ¾” X ½” BSP (M) PIR5130 060806 – ¾“ X 1” X ¾” BSP (M) PIR5130 040804 – ½” X 1” X ½” BSP (M) PIR5130 080404 – 1” X ½” X ½” BSP (M) PIR5130 080604 – 1” X ¾” X ½” BSP (M) PIR5130 080406 – 1” X ½” X ¾” BSP (M)

Product Images

Approval Holder:

Conex Universal Limited

Company Name

Conex Universal Limited

Address

Unit 95, Vantage Point Kingswinford

Postcode

DY6 7FT

Country

United Kingdom

Phone

+44 (0)121 5772831

General Email

Christopher.Harte@IBPGroup.com

View All Listings by this Company

Manufacturer:

IBP Atcosa SL

Company Name

IBP Atcosa SL

Address

General Email

View All Listings by this Company

Range of Flomasta brass pushfit fittings for use with PE-x pipe (manufactured to BS7291-3), PB pipe (manufactured to BS7291-2) & copper pipe. Maximum working pressure 10.0 bar @ 65°C (PSU & DZR Brass Fittings). Open outlet use only @ 20°C (POM Fittings).

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2006084

Size:

See model

Marking:

TLC on bodies of brass fittings. TLC on collet.

Installation Requirements:

R001

Expiry date:

30/06/2025

Model:

PSU Fittings: SMF6741M-2P 2 Ports Manifold 22mm pushfit x 10mm pushfit SMF6746M-2P- 2 Ports Manifold 22mm pushfit x 15mm pushfit SMF6741M-4P- 4 Ports Manifold 22mm pushfit x 10mm pushfit POM Fittings: ATC44M-Tank connector 22mm pushfit x 3/4” BSP male ATC66M-Tank connector 15mm pushfit x 1/2” BSP male ATC44MBK-Tank connector 22mm pushfit x 3/4” BSP male ATC66MBK-Tank connector 15mm pushfit x 1/2” BSP male DZR Brass Fittings: SBMCC6741M-Cylinder Adaptor 22mm pushfit x 1” BSP male SBFA6764M-Female Coupler 15mm pushfit x 1/2” BSP female SBFA6765M-Female Coupler 15mm pushfit x 3/4” BSP female SBFA6745M-Female Coupler 22mm pushfit x 3/4” BSP female SBMC6764M-Male Coupler 15mm pushfit x 1/2” BSP male SBMC6745M- Male Coupler 22mm pushfit x 3/4” BSP male SBBPE6764M-Back Plate Elbow 15mm pushfit x 1/2” BSP female

Approval Holder:

Kingfisher Plc.

Company Name

Kingfisher Plc.

Address

3 Sheldon Square, Paddington, London

Postcode

W2 6PX

Phone

+44 (0) 20 7372 8008

View All Listings by this Company

Manufacturer:

SNC Corporation

Company Name

SNC Corporation

Address

30, Baekbeom-ro 678 beon-gil Seo-gu Incheon

Postcode

22825

Country

South Korea

Phone

+82-70-8795-3200

View All Listings by this Company

Range of end feed copper fittings for use with copper tube. Maximum working pressure 16.0 bar. Maximum operating temperature 95°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2011038

Size:

Please refer to model.

Marking:

◊ A ◊ (Masterflow logo) and 'SIZE' on body.

Installation Requirements:

R001

Expiry date:

30/11/2025

Model:

Masterflow soldered endfeed: Straight Coupler 8mm to 54mm. Reduced Coupler 8mm to 54mm. Fitting Reducer 8mm to 54mm. Fitting Reduce (Long) 8mm to 15mm. Imperial/Metric Coupler 1/2”x15mm.3/4”x22mm.1”x28mm. Slip Coupler 15mm to 28mm. C x Fl Straight Coupler 15mm x 1/2”,15mm x 3/4”,22mm x 3/4”, 28mm x 1”,35mm x 1.1/4”,42mm x 1.1/2”,54mm x 2”. Cx Ml Straight Coupler 15mm x 1/4”,15mm x 1/2”,22mm x 1/2”, 22mm x 3/4”,28mm x 1”,35mm x 1.1/4”,42mm x 1.1/2”,54mm x 2”. C x Fl 15mm x 1/2”,22mm x 3/4.” C x Ml Elbow 15mm x 1/2”,22mm x 3/4”. 90 deg Elbow 8mm to 54mm. 90 deg Street Elbow 10mm to 54mm. Obtuse Street Elbow 15mm to 54mm. End Feed Long Radius Street Elbow 15mm x 54mm. 45 deg Obtuse Elbow 15mm to 54mm. Wallplate Elbow 15mm x 1/2”. Part Crossover 15mm to 22mm. Full Crossover 15mm to 22mm. Equal Tee 10mm to 54mm. Reduced Branch Tee 10mm to 54mm. Reduced End Tee 15mm to 54mm. Reduced End & Branch Tee 15mm to 54mm. Both Ends Reduced Tee 15mm x 28mm. Extended Street Elbow 15mm x 150mm. Fl Tee (Fl On Run) 15mm x 1/2” x 15mm, 22mm x 1/2” x 22mm. Fl Tee (On Run) 15 x 15 x 1/2”,22 x22 x 1/2”,22 x 22 x 3/4”. Stop End 8mm to 54mm. Straight Tap Connector 15mm x 1/2”,15mm x 3/4”, 22mm x 3/4”. Bent Cap Connector 15mm x 1/2”,15mm x 3/4”,22mm x 3/4”. Bent Union Adaptor 22mm x 1”. Straight Union Adaptor 22mm x 3/4”,22mm x 1”,28mm x 1”. Air Vent Cap 15mm and 22mm. U Bend 15mm.

Product Images

Approval Holder:

Masterflow UK

Company Name

Masterflow UK

Address

Astley Park Estate, The Gatehouse, Kennedy Road, Astley, Manchester

Postcode

M29 7JY

View All Listings by this Company