Water Regulations Approval Scheme Ltd

Tubes

Section Code 1863 : Elastomeric.

WRAS Approval Number: #2210035

Range of stainless steel interlocked (H35 models) or nylon braided (H36 models) flexible hose assemblies. H35 models are available with either a silicone or TPE liner, the H36 models are available with a TPE liner only. Maximum operating temperature 60°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2210035
Note:: IRN R008 only applies to H36 models. Open outlet use only.
Size:: See model
Marking:: SOLEX, WRAS and date of manufacture (MM/YY) on conical nut
Installation Requirements:: R001 R008
Expiry date:: 31/10/2027
Model:: H35X0001S: The following suffixes are added to the model code to denote hose type and connections: -02: Metal hose, 1/2" BSP (F) ANTIWIST x M15 (M), -03: Metal hose, 1/2" BSP (F) x M15 (M), -04: Metal hose, M20 (F) x M15 (M). H36X0001S: The following suffixes are added to the model code to denote hose type and connections: -02: braided hose, 1/2" BSP (F) ANTIWIST x M15 (M), -03: braided hose, 1/2" BSP (F) x M15 (M), -04: braided hose, 1/2" BSP (F) ball joint x M15 (M), -02QC: braided hose, 1/2" BSP (F) ANTIWIST x 11mm QC fitting, -03QC: braided hose, 1/2" BSP (F) x 11mm QC fitting, -04QC: braided hose, 1/2" BSP (F) ball joint x 11mm QC fitting. Hose length can either be denoted by the length in mm after the model code, or by replacing the X. Using 1500mm as an example the code can either be: H35X0001S 1500mm or H3515000001S followed by one of the suffixes above.

Approval Holder:: Xiamen Solex High-Tech Industries Co., Ltd.

Company Name
Xiamen Solex High-Tech Industries Co., Ltd.
Address
No. 298 Yangguang Road West, Haicang District, Xiamen, Fujian Province, 361022
Country
China
General Email
brian_lin@mysolex.com

View All Listings by this Company
Manufacturer:: Xiamen Solex High-Tech Industries Co., Ltd.

Company Name
Xiamen Solex High-Tech Industries Co., Ltd.
Address
No. 298 Yangguang Road West, Haicang District, Xiamen, Fujian Province, 361022
Country
China
General Email
brian_lin@mysolex.com

View All Listings by this Company

WRAS Approval Number: #2210319

Range of stainless steel or nylon braided, PEX or EPDM inner liner flexible hose assemblies available in a range of various end connections. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2210319
Note:: R008 only applies to PEX lined hoses (GA-IL-01 series)
Size:: see model
Marking:: WRAS, year of manufacture (YYYY) and Gaoao stamped on ferrule.
Installation Requirements:: R001 R008
Expiry date:: 31/10/2027
Model:: GA-IL-01 series: PEX inner hose Outer hose available with: Stainless steel braiding with no color or Stainless steel braiding with red color or Stainless steel braiding with blue color. Inner hose: DN6(Φ9), DN6(Φ10), DN8 or DN10. End connections: G3/8 (Type 1), G3/8 (Type 2), G1/2 (Type 1), G3/4, M8x1, M10x1 (Type 1), M12x1 (Type 1). GA-PO-01 series: EPDM inner hose Outer hose available with: Stainless steel braiding or Nylon braiding. Inner hose: DN6(Φ9), DN6(Φ10) or DN8. End connections: G3/8 (Type 2), G1/2 (Type 2), G1/2 (Type 3), G1/2 (Type 4), G1/2 (Type 5), M10x1(Type 2), M12x1 (Type 2), M12x1 (Type 3), M15x1.

Approval Holder:: ZHEJIANG GAOAO SANITARY WARE CO.,LTD.

Company Name
ZHEJIANG GAOAO SANITARY WARE CO.,LTD.
Address
No.22 Yongda Road, Jiangkou Street, Huangyan District, Taizhou City Zhejiang Province
Postcode
318020
Country
China
General Email
2900324142@qq.com

View All Listings by this Company
Manufacturer:: ZHEJIANG GAOAO SANITARY WARE CO.,LTD.

Company Name
ZHEJIANG GAOAO SANITARY WARE CO.,LTD.
Address
No.22 Yongda Road, Jiangkou Street, Huangyan District, Taizhou City Zhejiang Province
Postcode
318020
Country
China
General Email
2900324142@qq.com

View All Listings by this Company

WRAS Approval Number: #2210345

Range of stainless steel or nylon braided, thermoplastic silicone rubber (TPSiV) lined flexible hoses with a variety of end connectors. Maximum working pressure 10.0 bar. Maximum operating temperature 90°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2210345
Size:: DN6 hoses available with the following end connections 8x1, 8x0,75, 10x1, 11x1, 12x1, 15x1, 14x1, F3/8, F1/2, F15x1, F14x1, F9/16, M3/8, M1/2, NPB Ø15, Ø15 c.o, F3/8 c/curva, F1/2 c/curva, F1/2 conical, T8 DN8 available with the following end connections 10x1, 11x1, 12x1, 15x1, 14x1, F3/8 F1/2, F3/4, F15x1; F14x1; F9/16; M3/8; M1/2; NPB Ø15; Ø15 c.o.; F3/8 c/curva; F1/2 c/curva; F1/2 conical; T8 DN10 hoses available with the following end connections: 12x1; F3/8; F1/2; F3/4; M3/8; M1/2; NPB Ø15; Ø15 c.o.; F3/8 c/curva; F1/2 c/curva; F1/2 conical; DN13 hoses available with the following end connections: F1/2; F3/4; M1/2; M3/4; F1/2 c/curva;
Marking:: FQR, date of manufacture (YY) & WRAS on ferrule
Installation Requirements:: R001 R008
Expiry date:: 31/10/2027
Model:: Series DN6K Series DN6KL Series DN6KZ Series P6K Series P6KL Series P6KZ Series DN8K Series DN8KL Series DN8KZ Series DPV8K Series DPV8KL Series DPV8KZ Series P9K Series P9KL Series P9KZ Series DN10K Series DN10KL Series DN10KZ Series DN13K Series DN13KL Series DN13KZ

Approval Holder:: F.Q.R. Frattini S.R.L.

Company Name
F.Q.R. Frattini S.R.L.
Address
Via Per Borgomanero 71 Briga Novarese (No)
Postcode
28010
Country
Italy
Phone
+39 0322 94100
General Email
fqr3@fqrfrattini.com

View All Listings by this Company
Manufacturer:: F.Q.R. Frattini S.R.L.

Company Name
F.Q.R. Frattini S.R.L.
Address
Via Per Borgomanero 71 Briga Novarese (No)
Postcode
28010
Country
Italy
Phone
+39 0322 94100
General Email
fqr3@fqrfrattini.com

View All Listings by this Company

WRAS Approval Number: #2103343

Range of stainless steel, stainless steel with nylon or nylon braided, EPDM lined hose assemblies. Some models incorporate servicing valves. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2103343
Size:: DN 6 (denoted by 06) bore diameter availble with the following end connections: 01= F1/4 02= F1/4 elbow 03= M1/4 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 19= M8*(12-110) with single O-ring 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 26= F15 29=10mm Compression fitting 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (used with copper tube manufactured to BS2871) 40=12mm pushfit isolation valve (used with copper tube manufactured to BS2871) 41=15mm pushfit isolation valve (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871) 45= M8*(12‐110) with double O‐ring 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring DN8 (denoted by 08) bore diameter availble with the following end connections: 03= M1/4 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 19= M8*(12-110) with single O-ring 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 26= F15 27=15mm smooth tube 29=10mm Compression fitting 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (used with copper tube manufactured to BS2871) 40=12mm pushfit isolation valve (used with copper tube manufactured to BS2871) 41=15mm pushfit isolation valve (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871) 43= F1/2 plastic nut 44= F3/4 plastic nut 45= M8*(12‐110) with double O‐ring 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN10 (denoted by 10) bore diameter availble with the following end connections: 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 27=15mm smooth tube 28=22mm smooth tube 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (for use with copper tube) 40=12mm pushfit isolation valve (for use with copper tube) 41=15mm pushfit isolation valve (for use with copper tube) 42=22mm pushfit isolation valve (for use with copper tube) 43= F1/2 plastic nut 44= F3/4 plastic nut 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN13 (denoted by 13) bore diameter availble with the following end connections: 04= F3/8 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 27=15mm smooth tube 28=22mm smooth tube 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 37=15mm pushfit (for use with copper tube) 38=22mm pushfit (for use with copper tube) 41=15mm pushfit isolation valve (for use with copper tube) 42=22mm pushfit isolation valve (for use with copper tube) 43= F1/2 plastic nut 44= F3/4 plastic nut 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN19 (denoted by 09) bore diameter availble with the following end connections 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 28=22mm smooth tube 32=22mm compression fitting 34=22mm isolation valve 38=22mm pushfit (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871)
Marking:: Altecnic WRAS and (date of manufacture) LD on ferrule Where the date code (if present) indicates the date of manufacture as follows: I – 2019, J – 2020, K – 2021, L – 2022, M – 2023, N - 2024. Followed by A - Jan, Feb, March, B - Apr, May, June, C - July, Aug, Sept, D - Oct, Nov, Dec e.g. ID = manufactured in the 4th quarter (Oct, Nov, Dec) of 2019. Model added September 2021: AP-400012: Altecnic and date code on body. Where the date code (if present) indicates the date of manufacture as follows: I - 2019, J - 2020, K - 2021, L - 2022, M - 2023, N - 2024. Followed by: A - Jan, Feb, March. B - Apr, May, June. C - July, Aug, Sept. D - Oct, Nov, Dec. e.g. ID = manufactured in the 4th quarter (Oct, Nov, Dec)
Installation Requirements:: R001
Expiry date:: 31/03/2026
Model:: JL-F1400120012487 & JL-140038003813

Approval Holder:: Altecnic Limited

Company Name
Altecnic Limited
Address
Francesco House, Staples Close Stafford Staffordshire
Postcode
ST16 1WQ
Country
United Kingdom
Phone
+44 (0)1785 218200
General Email
sales@altecnic.co.uk

View All Listings by this Company

WRAS Approval Number: #2207056

Stainless-steel or nylon braided EPDM lined flexible hoses assemblies with various end connections (see model). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2207056
Size:: See model.
Marking:: M&J (Trademark of Taizhou M&J Sanitary Ware Co., Ltd.), WRAS and year of manufacture (YYYY) on ferrule.
Installation Requirements:: R001
Expiry date:: 31/07/2027
Model:: MJ-SS-E (stainless steel braided) & MJ-SS-E (Nylon braided): DN6 bore: ⅜" captive nut (brass barb), ⅜" captive nut (SUS barb), M8 (brass barb), M8 (SUS barb), M10x1 (brass barb), M10x1 (SUS barb), Plastic quick connector DN11. D8 bore: ⅜" captive nut (brass barb), ⅜" captive nut (SUS barb), ½" captive nut (brass barb), ½" captive nut (SUS barb), ¾" captive nut (brass barb), ¾" captive nut (SUS barb), M8 (brass barb), M8 (SUS barb), M10x1 (brass barb), M10x1 (SUS barb), F15x1 (brass barb), F15x1 (SUS barb), M15x1 (brass barb), M15x1 (SUS barb), Ø11 insert (brass barb), Ø11 insert (SUS barb), Ø11 insert (plastic barb), Plastic quick connector DN11.

Approval Holder:: Taizhou M&J Sanitary Ware Co., Ltd.

Company Name
Taizhou M&J Sanitary Ware Co., Ltd.
Address
Luqiao District, Taizhou City, Zhejiang
Country
China

View All Listings by this Company