Water Regulations Approval Scheme Ltd

Fittings for use with Tube and Pipe

Section Code 1180 : Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

Back To Directory Sections

WRAS Approval Number: #2110393

Range of M type press fittings with TP2 copper bodies and EPDM ‘O’-rings, for use with TP2 copper pipe to EN1057. Above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 2110393
Size:: See model.
Marking:: Cupro Fit and size on body.
Installation Requirements:: R001
Expiry date:: 31/10/2026
Model:: EKYH0000, Equal coupling: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm EKYH0002, Straight coupling: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm EKYH0003, Reducing coupler: 22mm*15mm 28mm*15mm 28mm*22mm 35mm*15mm 35mm*22mm 35mm*28mm 42mm*15mm 42mm*22mm 42mm*28mm 42mm*35mm 54mm*15mm 54mm*22mm 54mm*28mm 54mm*35mm 54mm*42mm EKYH0004, Fitting reducer: 22mm*15mm 28mm*15mm 28mm*22mm 35mm*15mm 35mm*22mm 35mm*28mm 42mm*15mm 42mm*22mm 42mm*28mm 42mm*35mm 54mm*15mm 54mm*22mm 54mm*28mm 54mm*35mm 54mm*42mm EKYH0005, Female adapter: S15*1/2FC‐G S22*3/4FC‐G S28*1FC‐G S35*1 1/4FC‐G S42*1 1/2FC‐G S54*2FC‐G Note: FC‐G is female BSPP EKYH0006, Male adapter: S15*1/2MC‐ZG S15*3/4MC‐ZG S22*3/4MC‐ZG S22*1MC‐ZG S28*1MC‐ZG S35*1 1/4MC‐ZG S42*1 1/2MC‐ZG S54*2MC‐ZG Note: MC‐ZG is male BSPT EKYH0012, Long straight coupling: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm EKYH0100, 90° Elbow: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm EKYH0101, 90° Street elbow: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm EKYH0104, Reducing elbow: 22mm*15mm 28mm*15mm 28mm*22mm EKYH0130, 45° Elbow: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm EKYH0131, 45° Street elbow: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm EKYH0166, Crossover:15mm, 22mm, 28mm EKYH0167, Part crossover: 15mm, 22mm, 28mm EKYH0201, Equal Tee: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm EKYH0202, Reducing tee: 22mm*22mm*15mm 28mm*28mm*15mm 28mm*22mm*15mm 35mm*35mm*15mm 35mm*35mm*22mm 35mm*35mm*28mm 42mm*42mm*15mm 42mm*42mm*22mm 42mm*42mm*28mm 42mm*42mm*35mm 54mm*54mm*15mm 54mm*54mm*22mm 54mm*54mm*28mm 54mm*54mm*35mm 54mm*54mm*42mm 22mm*15mm*15mm 22mm*15mm*22mm 28mm*15mm*15mm 28mm*15mm*22mm 28mm*15mm*28mm 28mm*22mm*15mm 28mm*22mm*22mm 28mm*22mm*28mm 15mm*15mm*22mm 22mm*22mm*28mm EKYH0301, Cap, size: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm

Approval Holder:: Cubralco Ltd.

Company Name
Cubralco Ltd.
Address
Ricketts Close, Firs Industrial Estate, Kidderminster, Worcestershire
Postcode
DY11 7QN

View All Listings by this Company

WRAS Approval Number: #2205310

‘Instantor’ range of press-fit fittings incorporating DZR brass or Gunmetal bodies and EPDM ‘O’-rings for use with copper pipe (manufactured to EN1057). Maximum working pressure 16.0 bar. Maximum working temperature 95˚C.

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 2205310
Size:: SEE MODEL
Marking:: Sanbra Fyffe logo (S), Size, and Jaw Profile (VI or M) on body. CR and DZR on brass bodies.
Installation Requirements:: R001
Expiry date:: 31/05/2027
Model:: INSTANTOR Copper Press Straight coupler models CP311001 - ½” BSP (M) CP311002 - ¾” BSP (M) CP311003 - 1” BSP (M) CP312001 - ½” BSP (F) CP312002 - ¾” BSP (F) CP312003 - 1” BSP (F) CP411001 - ½” BSP (M) x 15mm Press CP411002 - ¾” BSP (M) x 22mm Press CP411003 - 1” BSP (M) x 28mm Press CP412001 - ½” BSP (F). x 15mm Press CP412002 - ¾” BSP (F). x 22mm Press CP412003 - 1” BSP (F) x 28mm Press

Product Images

Approval Holder:: Sanbra Fyffe Ltd.

Company Name
Sanbra Fyffe Ltd.
Address
Conex Works, Santry Avenue, Dublin
Postcode
D09 K160
Country
Ireland
Phone
353 1 842 6255
General Email
sales@sanbra.ie

View All Listings by this Company

WRAS Approval Number: #2206013

Range of ‘StrengThin™’ 100 System couplings and fittings for use with stainless steel pipe (manufactured to EN 10217-7). For above and below ground use. Maximum working pressure 16.0 bar. Maximum operating temperature 65°C.

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 2206013
Size:: Please refer to model.
Marking:: Victaulic logo, model, size and technical information on body.
Installation Requirements:: R001
Expiry date:: 30/06/2027
Model:: StrengThin™ 100 System Couplings and Fittings comprising of models: No. E490, 90° Elbow: DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250 & DN300. No. E491, 45° Elbow: DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250 & DN300. No. E492, Tee: DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250 & DN300. No. E493, Reducing Tee: DN65 x DN65 x DN50; DN80 x DN80 x DN50, DN80 x DN80 x DN65, DN100 x DN100 x DN50 DN100 x DN100 x DN65, DN100 x DN100 x DN80, DN125 x DN125 x DN65, DN125 x DN125 x DN80, DN125 x DN125 x DN100, DN150 x DN150 x DN80, DN150 x DN150 x DN100, DN150 x DN150 x DN125, DN200 x DN200 x DN100, DN200 x DN200 x DN125, DN200 x DN200 x DN150; DN250 x DN250 x DN1250, DN250 x DN250 x DN150, DN250 x DN250 x DN200; DN300 x DN300 x DN150, DN250 x DN250 x DN200 & DN250 x DN250 x DN250. No. E494, & E494G Adaptor Nipple: DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250 & DN300. No. E495, Concentric Reducer: DN65xDN50, DN80xDN50, DN80xDN65, DN100xDN50, DN100xDN65, CN100xDN80, DN125xDN80, DN125xDN100, DN150xDN100, D150xDN125, DN200xDN125, DN200xDN150, DN250xDN150, DN250xDN200, DN300xDN200 & DN300xDN250. No. E496, End Cap: DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250 & DN300. Style E497, Rigid Coupling: DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250 & DN300. No. E498, Flange Adaptor: DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250 & DN300. Models added April 2024: Style E155 ‘StrengThin™’ 100 system Expansion Joint: DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250 & DN300

Product Images

Approval Holder:: Victaulic Europe BVBA

Company Name
Victaulic Europe BVBA
Address
Prijkelstraat 36 Nazareth
Postcode
B-9810
Country
Belgium
General Email
ed.mccarson@victaulic.com

View All Listings by this Company
Manufacturer:: Victaulic Europe BVBA

Company Name
Victaulic Europe BVBA
Address
Prijkelstraat 36 Nazareth
Postcode
B-9810
Country
Belgium
General Email
ed.mccarson@victaulic.com

View All Listings by this Company

WRAS Approval Number: #2206027

Kuterlite K900 Pro range of compression fittings with DZR brass bodies for use with copper pipe (EN 1254) Maximum working pressure for 8mm-10mm = 70.0 bar. Maximum working pressure for 12mm – 28mm = 20.0 bar. Maximum working pressure for 35mm – 54mm = 6.0 bar. Maximum operating temperature 90°C.

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 2206027
Size:: Please refer to model.
Marking:: Kuterlite PRO, Flow arrow, EN 1254-2 and size on nut. CR on body.
Installation Requirements:: R001
Expiry date:: 30/06/2027
Model:: K910X: Straight Coupling 10mm to 54mm K911X: (M) Coupling 12mm to 54mm x ¼” BSP (M) to 2” BSP (M) K911PX: (M) Coupling 8mm to 54mm x ½” BSP (F) to 2” BSP (F) K911LBX: Long Tank Coupling 22mm x ¾” BSP (M) & 28mm x 1” BSP (M) K911TCX: Tank Coupling 15mm to 54mm x ½” BSP (M) to 2” BSP (M) K912X: (F) Coupling 12mm to 54mm x 3/8” BSP (F) to 2” BSP (F) K915X: Elbow 12mm to 54mm K916X: (M) Elbow 12mm to 54mm x 3/8” BSP (M) to 2” BSP (M) K916PX: (M) Elbow 15 to 28mm x ½” BSP (M) to 1” BSP (M) K916LBX: Long (M) Elbow 22mm x ¾” BSP (M) K917X: (F) Elbow 12mm to 42mm x 3/8” BSP (F) to 1.1/2” BSP (F) K917WX: (F) Wall Elbow 15mm x ½” BSP (F) & 22mm x ¾” BSP (F) K918X: Equal Tee 10mm to 54mm K918BX: Tee (Reduced) 15mm to 54mm K918EBX: Tee End & Branch 15mm to 28mm K918EEX: Tee (Both Reduced) 12mm to 22mm K920X: (M) End Tee 15mm x ½” BSP (M) x 15mm K920HX: (M) Branch Tee 15mm x 15mm x ½” BSP (M) K923X: Cross 15mm KS926X: Swivel Tap Connector 15mm x ½” BSP (M) to ¾” BSP (M) & 22mm x ¾” BSP (M) K927X: Bent Tap Connector 15mm x ½” BSP (M) & 22mm x ¾” BSP (M) K930X: (F) Branch Tee 15mm to 28mm x 15mm to 28mm x ¼” BSP (F) to 1” BSP (F) K930EX: (F) End Tee 15mm to 28mm x ½” BSP (F) to ¾” BSP (F) x 15mm to 28mm K941X (F) Adaptor 22mm x ¾” BSP (F) K947X: Reducer 8mm to 28mm K948: Reducing Set 22mm to 28mm K949: Reducing Set 35mm to 54mm KS950X: Tank Connector 15mm to 54mm K951X: Stop End 12mm to54mm K953X: Crossover 15mm K972X: Blanking Plug 15mm to 54mm K1870X: Kufit Adaptor 15mm to 22mm K915XCP: Elbow 15mm & 35mm K917WXCP: Backplate Elbow 15mm x ½” BSP (F) & 22mm x ¾” BSP (F) K918XCP: Equal Tee 15mm K918BXCP: Tee (Reduced) 15mm to 28mm K947XCP: One Piece Reducer 15mm to 22mm

Product Images

Approval Holder:: Aalberts Integrated Piping Systems Ltd.

Company Name
Aalberts Integrated Piping Systems Ltd.
Address
St. Catherines Avenue Doncaster South Yorkshire
Postcode
DN4 8DF
Country
United Kingdom
Phone
+447843075405
General Email
gavin.peters@aalberts-ips.com

View All Listings by this Company

WRAS Approval Number: #2206045

Range of copper and DZR brass press fit tap connectors for use with copper tube (manufactured to EN1057). Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 2206045
Size:: ½” press fit x ½” BSP captive nut. ¾” press fit x ¾” BSP captive nut.
Marking:: >B< (manufacturer’s logo), DR & size on body
Installation Requirements:: R001
Expiry date:: 30/06/2027
Model:: PIR5002G – Bent Tap Connector PIR5002G040400 & PIR5002G060600. PIR5240G – Straight Tap Connector PIR5240G040400 & PIR5240G060600.

Product Images

Approval Holder:: Conex Universal Limited

Company Name
Conex Universal Limited
Address
Unit 95, Vantage Point Kingswinford
Postcode
DY6 7FT
Country
United Kingdom
Phone
+44 (0)121 5772831
General Email
Christopher.Harte@IBPGroup.com

View All Listings by this Company
Manufacturer:: Conex Universal Limited

Company Name
Conex Universal Limited
Address
Unit 95, Vantage Point Kingswinford
Postcode
DY6 7FT
Country
United Kingdom
Phone
+44 (0)121 5772831
General Email
Christopher.Harte@IBPGroup.com

View All Listings by this Company