Rubbers

Section Code 5365 : Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.

Back To Directory Sections

#2307515

'CS-EW70'. Black coloured, compression moulded EPDM rubber. Shore hardness 70. Tested in-radius size 0.96mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2307515
Expiry date:
31/07/2028
Approval Holder:
Cherrysource Ltd.
Company Name
Cherrysource Ltd.
Address
Unit 7, Pinfold Lane, Llay Industrial Estate, Llay, Wrexham
Postcode
LL12 0PX

View All Listings by this Company

Print This Approval

#2306559

'ML 57314'. Black coloured, compression moulded EPDM material. Shore hardness 68A. Tested in-radius size 1.0mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2306559
Expiry date:
30/06/2028
Approval Holder:
SumiRiko AVS Germany GmbH
Company Name
SumiRiko AVS Germany GmbH
Address
Karl Winnacker Strasse 22a, D-39396 Steinau an der Strasse
Country
Germany

View All Listings by this Company

Print This Approval

#2307527

'EPDM-812-cm (70H/mid)'. Black coloured, compression moulded EPDM sheet material. Shore hardness 70A. Tested in-radius size 1.0mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2307527
Expiry date:
31/07/2028
Approval Holder:
Ein Shemer Rubber Industries A.C.A. Ltd
Company Name
Ein Shemer Rubber Industries A.C.A. Ltd
Address
D.N. Hefer 38816 Kibbutz Ein-Shemer
Country
Israel

View All Listings by this Company

Print This Approval

#2306561

'PT-EPDM55'. Black coloured, compression moulded EPDM material. Shore hardness 55. Tested in-radius size 1.1mm. For use with water up to 60°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2306561
Expiry date:
30/06/2028
Approval Holder:
Shanghai Pingtai Rubber Products Co. Ltd.
Company Name
Shanghai Pingtai Rubber Products Co. Ltd.
Address
No. 6 Siping Road, Situan Town, Fengxian District, Shanghai

View All Listings by this Company

Print This Approval

#2307529

'AEC.5/EPDM.80'. Black coloured, compression moulded EPDM material. Shore hardness 80. Tested in-radius size 1.1mm. For use with water up to 65°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2307529
Expiry date:
31/07/2028
Approval Holder:
Allianz Elastomer
Company Name
Allianz Elastomer
Address
Opp.-Samarpan Lamination, Rajpar Road AT-Sakatsanla, Morbi 363641 Gujarat
Country
India

View All Listings by this Company

Print This Approval

#2308514

'EPDM 773'. Black coloured, injection moulded EPDM sheet material (manufactured in Czech Republic). Shore hardness 50. Tested in radius sizes 0.9mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2308514
Expiry date:
31/08/2028
Approval Holder:
Trelleborg Pipe Seals
Company Name
Trelleborg Pipe Seals
Address
Pascallaan 80, 8218NJ Lelystad
Country
Netherlands

View All Listings by this Company

Print This Approval

#2308515

'EPDM 798'. Black coloured, injection moulded EPDM material (manufactured in Czech Republic). Shore hardness 60. Tested in-radius size 1.0mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2308515
Expiry date:
31/08/2028
Approval Holder:
Trelleborg Pipe Seals
Company Name
Trelleborg Pipe Seals
Address
Pascallaan 80, 8218NJ Lelystad
Country
Netherlands

View All Listings by this Company

Print This Approval

#2308523

'Kingsun EP1702'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 65°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2308523
Expiry date:
31/08/2028
Approval Holder:
Kingsun Sealing Technology (Shanghai) Co., Ltd
Company Name
Kingsun Sealing Technology (Shanghai) Co., Ltd
Address
Room402, Building 7, No.5, Lane 689, Xiwang Road, Jiading District, Shanghai
Country
China

View All Listings by this Company

Print This Approval

#2312503

'XXE01'. Black coloured, compression moulded EPDM rubber material. Shore hardness 50. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2312503
Expiry date:
31/12/2028
Approval Holder:
Xingtai Rubber Factory
Company Name
Xingtai Rubber Factory
Address
No. 175 North Xingzhou Road, Xingtai City, Hebei Province
Country
China

View All Listings by this Company

Print This Approval

#2309510

'JM-EP01'. Black coloured, compression moulded EPDM material. Shore hardness 75. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2309510
Expiry date:
30/09/2028
Approval Holder:
Wuhu Jinmao Environmental Science & Technology Co. Ltd.
Company Name
Wuhu Jinmao Environmental Science & Technology Co. Ltd.
Address
The Industrial Zone in Suncun Town, Fanchang County, Anhui Province
Country
China

View All Listings by this Company

Print This Approval

#2308528

'Sunaflex T 8193'. Black coloured, compression moulded EPDM rubber material. Shore hardness 80. Tested in-radius size 1.0mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2308528
Expiry date:
31/08/2028
Approval Holder:
Compounds AG
Company Name
Compounds AG
Address
Barzloostrasse 1, 8330 Pfaffiken ZH, Switzerland
Phone
+41 44 953 34 36
General Email
info@compounds.ch

View All Listings by this Company

Print This Approval

#2308529

'AquaFlex T 5893'. Black coloured, compression moulded EPDM material. Shore hardness 80. Tested in-radius size 1.0mm. For use with water up to 65°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2308529
Expiry date:
31/08/2028
Approval Holder:
Compounds AG
Company Name
Compounds AG
Address
Barzloostrasse 1, 8330 Pfaffiken ZH, Switzerland
Phone
+41 44 953 34 36
General Email
info@compounds.ch

View All Listings by this Company

Print This Approval

#2308530

'AquaFlex T 9696'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2308530
Expiry date:
31/08/2028
Approval Holder:
Compounds AG
Company Name
Compounds AG
Address
Barzloostrasse 1, 8330 Pfaffiken ZH, Switzerland
Phone
+41 44 953 34 36
General Email
info@compounds.ch

View All Listings by this Company

Print This Approval

#2409500

'EUW-70'. Black coloured, injection moulded EPDM rubber material. Shore hardness 70. Tested in-radius size 0.5mm. For use with water up to 60°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2409500
Expiry date:
30/09/2029
Approval Holder:
AVK GUMMI A/S
Company Name
AVK GUMMI A/S
Address
Mosegaardsvej 1, DK 8670 Laasby
Country
Denmark
Phone
+45 8695 1311
General Email
avkgummi.dk

View All Listings by this Company

Print This Approval

#2302565

‘SMS-8000-Premium’. Black coloured, compression moulded EPDM material. Shore hardness 80 respectively. Tested in-radius size 1.0mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2302565
Expiry date:
29/02/2028
Approval Holder:
Samsun Makina Sanayi A.S.
Company Name
Samsun Makina Sanayi A.S.
Address
Organize Sanayi Bolgesi, Yasar Dogu Caddesi, No. 33 P.K. 136
Country
55267 Kutlukent,

View All Listings by this Company

Print This Approval

#2309514

'NPEPDM-80'. Shore hardness 80. 'NPEPDM-50' was added to the approval in December 2023. Shore hardness 50. Black coloured, compression moulded, EPDM materials. Tested in-radius size 1.0mm. For use with water up to 70°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2309514
Expiry date:
30/09/2028
Approval Holder:
National Polymers
Company Name
National Polymers
Address
Survey No.-2B6, Plot No .3 Vill -Rupal, Taluka- Bavla, Ahmedabad-380009, Gujarat
Country
India

View All Listings by this Company

Print This Approval

#2309521

'334701 - EPDM peroxide 70'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2309521
Expiry date:
30/09/2028
Approval Holder:
Techne SA
Company Name
Techne SA
Address
ZA Les Haies, 69480 Morance
Country
France
Phone
+33 478 430156
General Email
www.techne.fr

View All Listings by this Company

Print This Approval

#2309526

'Ganga 50, 60, 70, 80 & 90'. Black coloured, compression moulded EPDM materials with a shore hardness of between 50 & 90 ShA. Tested in-radius size 1.1mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2309526
Expiry date:
30/09/2028
Approval Holder:
Mangla Rubber Technologies
Company Name
Mangla Rubber Technologies
Address
319 Shivaji Road, Vijay Nagar, Meerut, UP 250002
Country
India

View All Listings by this Company

Print This Approval

#2310508

'EPDM50BKWS, EPDM55BKWS, EPDM60BKWS, EPDM65BKWS, EPDM70BKWS, EPDM75BKWS & EPDM80BKWS'. Black coloured, compression moulded EPDM rubber materials. Shore hardness between 50 & 80. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2310508
Expiry date:
31/10/2028
Approval Holder:
Kesaria Rubber Industries Pvt. Ltd.
Company Name
Kesaria Rubber Industries Pvt. Ltd.
Address
Binola Industrial Area, VPO Bhoda Kalan, 57/58 KM Stone, NH-8, Gurgaon, 122413, Haryana
Country
India

View All Listings by this Company

Print This Approval

#2204543

'JJSXEPDMIRHD50 (shore hardness 50) & JJSXEPDMIRHD70 (shore hardness 70)'. Black coloured, compression moulded EPDM materials. Tested in-radius size 0.99mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2204543
Expiry date:
30/04/2027
Approval Holder:
Saint-Gobain PAM(Jiangsu) Pipelines Technology Co., Ltd.
Company Name
Saint-Gobain PAM(Jiangsu) Pipelines Technology Co., Ltd.
Address
Building No.5, Zi Yun Wisdom Plaza, No. 19 Kazimen Avenue, Qinhuai District, Nanjing
Country
China

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page 7 of 14

© WRAS 2026 | Update Cookie Consent

Site Developed By Duo

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.