Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #2307806

Hattersley M2000 range of flow measuring devices with stainless steel bodies. Maximum working pressure 25.0 bar. Maximum operating temperature 99°C.

Section:: 1520 Meter Chambers
Section Subtitle:: In-wall.
WRAS Approval Number:: 2307806
Size:: DN65, DN80, DN100, DN125 and DN150 wafer flange inlet and outlet.
Marking:: Hattersley, size & pressure on adhesive label on body.
Installation Requirements:: R001
Expiry date:: 31/07/2028
Model:: Hattersley M2000 - Flow Measurement Device (FMD)

Approval Holder:: Hattersley

Company Name
Hattersley
Address
Crane House Epsilon Terrace West Road Ipswich
Postcode
IP3 9FJ
Country
United Kingdom
General Email
uksales@hattersley.com

View All Listings by this Company

WRAS Approval Number: #2306048

Flow meter with stainless steel body. Maximum working pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:: 1530 Miscellaneous Fittings
Size:: DN100 Flanged
Marking:: Pydro on body. Pydro, Model, Serial no, size and other technical information on data plate on body
Installation Requirements:: R001
Expiry date:: 30/06/2028
Model:: PT-1 Multi Sensing Device

Product Images

Approval Holder:: PYDRO GMBH

Company Name
PYDRO GMBH
Address
FRIEDRICH-BARNEWITZ-STR. 7 DE-18119 ROSTOCK-WARNEMÜNDE

View All Listings by this Company
Manufacturer:: PYDRO GMBH

Company Name
PYDRO GMBH
Address
FRIEDRICH-BARNEWITZ-STR. 7 DE-18119 ROSTOCK-WARNEMÜNDE

View All Listings by this Company

WRAS Approval Number: #2306904

‘AQ tap’ water dispensing unit incorporating a brass solenoid and a flow sensor. The unit is operated using a smart card and credit system that allows the user to obtain a set amount of water. Maximum working pressure 3.0 bar. Cold water use only.

Section:: 1530 Miscellaneous Fittings
Size:: ½” BSP (M) inlet/outlet.
Marking:: Grundfos and Grundfos logo on front panel. Grundfos logo, type, model, Product no. and technical information on data plate on left hand side of cabinet.
Installation Requirements:: R001 R040
Expiry date:: 30/06/2028
Model:: AQT-AA-ST-1.

Product Images

Approval Holder:: Grundfos Holding A/S

Company Name
Grundfos Holding A/S
Address
Poul Due Jensens Vej 7 Bjerringbro
Postcode
DK-8850
Country
Denmark
Phone
+36302482216
General Email
oszilagyi@grundfos.com

View All Listings by this Company

WRAS Approval Number: #2306903

CMBE range of horizontal multistage centrifugal booster pumps with stainless steel bodies and impellers and EPDM ‘O’-rings. All models include an expansion vessel, non-return valve, pressure gauge and sensor on the outlet. Maximum working pressure 10.0 bar. Cold water use only.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 2306903
Size:: CMBE1 & CMBE3: 1” BSPT (F) Inlet/Outlet. CMBE5: 1 ¼” BSPT (F) Inlet/1” BSPT (F) Outlet. CMBE10: 1 ½” BSPT (F) Inlet/Outlet.
Marking:: Grundfos and Grundfos logo, type, Model, P/N no. and technical info on adhesive label on end of motor housing.
Installation Requirements:: R001 R040
Expiry date:: 30/06/2028
Model:: CMBE-XX1-XX2-I-U-C-X3-D-X4 Where: CMBE = Booster type - booster with integrated frequency inverter. XX1 = Rated flow rate [m³/h] @ 50Hz - 1, 3, 5 or 10. XX2 = Maximum head [m] - 44, 54, 62 or 93 (CMBE 1 = 44, CMBE 3 = 62 or 93, CMBE 5 = 62, CMBE 10 = 54). I = Materials in contact with liquid - Sleeve, Pump shaft, Impellers/chamber, 5-way valve: EN1.4301/AISI 304, Pressure manager: PP 30GF, Pressure tank: EPDM/steel/PP/Butyl. U = Supply Voltage [V] - 1 x 200-240 V, 50/60 Hz. C = Motor - High-efficiency motor with frequency converter (IP55). X3 = Main cable and plug options - A/B/C/D/E/H/G/J/O. D = Controller - Integrated frequency converter. X4 = Thread - A: Rp 1, B: Rp 1 1/4 or C: Rp 1 1/2.

Product Images

Approval Holder:: Grundfos Holding A/S

Company Name
Grundfos Holding A/S
Address
Poul Due Jensens Vej 7 Bjerringbro
Postcode
DK-8850
Country
Denmark
Phone
+36302482216
General Email
oszilagyi@grundfos.com

View All Listings by this Company

WRAS Approval Number: #2305076

Range of vertical multistage pumps with either stainless-steel bodies (“N” versions) or cast iron bodies with a black electrodeposition coating (“G” versions), stainless-steel impellers, shaft and outer sleeve. Maximum working pressure: NKV32 & NKV45 models - 32.0 bar, NKV65 & NKV95 models - 25.0 bar. Max operating temperature: Stainless steel (“N” versions) - 100°C. Cast iron (“G” versions) - Cold water use only.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 2305076
Size:: DN65 - DN100
Marking:: DAB Pumps Spa, serial number, model number, date of manufacture (DD/MM/YYYY) and pressure on data plate on body.
Installation Requirements:: R001 R415
Expiry date:: 31/05/2028
Model:: Code example (EV range): NVK 30 /13 A B C D E F G H J K L M N. Where: NVK = Pump model 30 = Rated flow [m³/h] (varies: 30-95). /13 = No. of stages/impellers. (See model and stages below for more detail). A = No. of trimmed impellers, if "Empty" = none. B = Flange type: "F" - round. C = Materials: "G" - (cast iron/Stainless steel); "N" - (AISI316/EN1.4401). D = Motor power (kW x 10). E = Motor type: “Vacuum” (pump without motor), "T" - 3-phase; "M" - 1-phase. F = Frequency: "5" - 50Hz; "6" - 60Hz. G = No. of motor poles: "Empty" - 2 poles; "4" - 4 poles. H = Mechanical Seal: "B" (balanced). J = Elastomeric and mechanical seal material: E1 (SiC-Carbon Graphite-EPDM) or E2 (SiC-SiC-EPDM). K = “IE…” motor efficiency class IEC60034-30, where applicable, “Vacuum” (pump without motor). L = “Vacuum” standard version,“M” (oversized motor). M = "Vacuum” - standard version. N = Motor voltage, “Vacuum” (pump without motor). NKV 32: stage from 1 to 13 (50Hz) and from 1-1A to 8 (60Hz); NKV 45: stage from 1-1A to 13-2A (50Hz) and from 1-1A to 7 (60Hz); NKV 65: stage from 1-1A to 8 (50hz) and from 1-1A to 5-1A(60 hz); NKV 95: stage from 1-1A to 6 (50Hz) and from 1-1A to 4-2A (60Hz).

Approval Holder:: DAB PUMPS SPA

Company Name
DAB PUMPS SPA
Address
Via Marco Polo 14 Mestrino (PD)
Postcode
35035
Country
Italy
General Email
certifications@dwtgroup.com

View All Listings by this Company

WRAS Approval Number: #2305078

Range of vertical multistage pumps with either stainless-steel bodies (“N” versions) or cast iron bodies with a black electrodeposition coating (“G” versions), stainless-steel impellers, shaft and outer sleeve. Maximum working pressure: FGV30, FGV45 - 32.0 bar, FGV65, FGV95 - 25.0 bar. Max operating temperature: Stainless steel (“N” versions) - 100°C. Cast iron (“G” versions) - Cold water use only.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 2305078
Size:: DN65 - DN100
Marking:: Fourgroup, serial number, model number, date of manufacture (DD/MM/YYYY) and pressure on data plate on body. Flow arrow on body.
Installation Requirements:: R001 R415
Expiry date:: 31/05/2028
Model:: FGV range. Code example (FGV range): FGV 30 /13 A B C D E F G H J K L M N. Where: FGV = Pump model FGV (EV = E-Tech “brand”). 30 = Rated flow [m³/h] (varies: 30-95). /13 = No. of stages/impellers. (See model and stages below for more detail). A = No. of trimmed impellers, if "Empty" = none. B = Flange type: "F" - round. C = Materials: "G" - (cast iron/Stainless steel); "N" - (AISI316/EN1.4401). D = Motor power (kW x 10). E = Motor type: “Vacuum” (pump without motor), "T" - 3-phase; "M" - 1-phase. F = Frequency: "5" - 50Hz; "6" - 60Hz. G = No. of motor poles: "Empty" - 2 poles; "4" - 4 poles. H = Mechanical Seal: "B" (balanced). J = Elastomeric and mechanical seal material: E1 (SiC-Carbon Graphite-EPDM) or E2 (SiC-SiC-EPDM). K = “IE…” motor efficiency class IEC60034-30, where applicable, “Vacuum” (pump without motor). L = “Vacuum” standard version,“M” (oversized motor). M = "Vacuum” - standard version. N = Motor voltage, “Vacuum” (pump without motor). FGV30: stage from 1 to 13 (50Hz) and from 1-1A to 8 (60Hz); FGV45: stage from 1-1A to 13-2A (50Hz) and from 1-1A to 7 (60Hz); FGV65: stage from 1-1A to 8 (50hz) and from 1-1A to 5-1A(60 hz); FGV95: stage from 1-1A to 6 (50Hz) and from 1-1A to 4-2A (60Hz).

Approval Holder:: FOURGROUP

Company Name
FOURGROUP
Address
via E. Fermi 8, 35020 Polverara (PD)
Country
Italy

View All Listings by this Company

WRAS Approval Number: #2204361

Range of booster pumps with stainless steel bodies, plastic impellers, and NBR ‘O’-rings. The products incorporate a temperature sensor, pressure sensor, pressure vessel and a non-return valve integral to the pump chamber. Maximum working pressure 6.5 bar. Maximum operating temperature 75°C.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 2204361
Size:: 1” BSP (F)
Marking:: SPCO and model number other technical information on adhesive label on body.
Installation Requirements:: R001 R415
Expiry date:: 30/04/2027
Model:: SMART PLUS 370-25-A, (370W), 25m (Rated Head), SMART PLUS 550-24-A, (550W), 24m (Rated Head), SMART PLUS 750-30-A, (750W), 30m (Rated Head), SMART PLUS 550-22-Z-A, (550W), 22m (Rated Head), SMART PLUS 750-28-Z-A, (750W), 28m (Rated Head), SMART PLUS 850-30-A, (850W), 65m (Rated Head).

Approval Holder:: Swiss Pump Company AG

Company Name
Swiss Pump Company AG
Address
Moosweg 36,3645 Thun - Gwatt
Country
Switzerland

View All Listings by this Company

WRAS Approval Number: #2306063

Range of shower arms and elbows (brass bodies – various finishes). Maximum operating temperature: (T2064W) - 95.0°C (T2062W, T2069W & T2069SW) - 85.0°C (T2066W) - 60°C

Section:: 1650 Shower Outlets
Section Subtitle:: Shower head(s) and/or shower handset(s).
WRAS Approval Number:: 2306063
Note:: Open outlet use only.
Size:: ½” BSP (M) 15mm compression X ½” BSP (F) elbow (T2062W)
Marking:: SHS on body
Installation Requirements:: R001 R040
Expiry date:: 30/06/2028
Model:: T2062W T2064W T2066W T2069W T2069SW Models: For_me T2062W-XX, T2064W-XX, T2066W-XX, T2069W-XX, T2069SW-XX Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters. As examples: CP = Chrome Finish, or URM = Urban Brass Matt Lacquered.

Product Images

Approval Holder:: Samuel Heath & Sons Plc

Company Name
Samuel Heath & Sons Plc
Address
100 Leopold Street Birmingham
Postcode
B12 0UJ
Country
United Kingdom
Phone
+44 (0) 1217 662 200
General Email
kay.stead@samuel-heath.com

View All Listings by this Company
Manufacturer:: Samuel Heath & Sons Plc

Company Name
Samuel Heath & Sons Plc
Address
100 Leopold Street Birmingham
Postcode
B12 0UJ
Country
United Kingdom
Phone
+44 (0) 1217 662 200
General Email
kay.stead@samuel-heath.com

View All Listings by this Company

WRAS Approval Number: #2306066

Wall mounted and ceiling mounted shower arms (chromium plated brass).

Non-metallic materials and components comply with BS6920 at 60°C

Section:: 1650 Shower Outlets
Section Subtitle:: Shower head(s) and/or shower handset(s).
WRAS Approval Number:: 2306066
Note:: Open outlet use only.
Size:: ½” BSP (M).
Marking:: Bonomi on body.
Installation Requirements:: R001 R040
Expiry date:: 30/06/2028
Model:: 302132/49A - Wall Mounted Arm, 112232/19A - Ceiling Mounted Arm.

Product Images

Approval Holder:: Idrosanitaria Bonomi SpA

Company Name
Idrosanitaria Bonomi SpA
Address
Via Monsuello, 36 Lumezzane S.S Brescia
Postcode
25065
Country
Italy
Phone
+39 030 8922111
General Email
massimoplati@idrobonomi.com

View All Listings by this Company
Manufacturer:: Idrosanitaria Bonomi SpA

Company Name
Idrosanitaria Bonomi SpA
Address
Via Monsuello, 36 Lumezzane S.S Brescia
Postcode
25065
Country
Italy
Phone
+39 030 8922111
General Email
massimoplati@idrobonomi.com

View All Listings by this Company

WRAS Approval Number: #2306907

Range of shower kits comprising of a chrome plated brass handset, shower hose and riser rail.

Non-metallic materials and components comply with BS6920 at 85°C

Section:: 1650 Shower Outlets
Section Subtitle:: Shower head(s) and/or shower handset(s).
WRAS Approval Number:: 2306907
Size:: ½” BSP captive nut.
Marking:: Bristan or heritage on shower handset
Installation Requirements:: R001 R040
Expiry date:: 30/06/2028
Model:: TRD KIT01 C TRD KIT01 G STA08 STC08

Product Images

Approval Holder:: Bristan Group Ltd.

Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park Dorden Tamworth
Postcode
B78 1SG
Country
Staffs
Phone
01827 254144
General Email
hmistry@bristan.com

View All Listings by this Company