‘Quattroselect’ range of chemical dosing units incorporating a lockable self-closing trigger assembly and a self-closing bottle filler assembly which control the flow. The products are supplied with an approved double check valve assembly at the inlet (suitable for backflow prevention against fluid category 3). Maximum working pressure 5.8 bar. Cold water use only.

Section:

0970 Dosing Equipment

Section Subtitle:

Fittings in this section have been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. The decision of the Scheme to list them is not to be taken as any guide as to their effectiveness to do the job for which they have been designed

WRAS Approval Number:

2110700

Size:

¾” BSP (M)

Marking:

Quattroselect on hose trigger. Diversey on label on door panel. Quattroselect on front panel. Other product info inside door panel.

Installation Requirements:

R001 R160 R040

Expiry date:

31/10/2026

Proviso:

Not suitable for use with chemicals greater than a fluid category 3 risk.

Model:

1219424 – QuattroSelect Pouch air gap CW 1219425 – QuattroSelect Pouch safe gap CW 1211418 – QuattroSelect Pouch air gap

Approval Holder:

Diversey Europe Operations BV.

Company Name

Diversey Europe Operations BV.

Address

De Boelelaan 32, 1083 HJ Amsterdam, Netherlands

View All Listings by this Company

Aquaflow polypropylene bodied compression fittings with EPDM ‘O’-rings for use with Elysee PE80 blue pipes. The fittings are supplied with a pipe liner. Above and below ground use. Maximum working pressure 12.5 bar. Cold water use only.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2010409

Note:

The liners supplied with each fitting must be used to maintain the validity of this approval. R008 applies to the connecting blue pipework when used above ground.

Size:

See model

Marking:

Fittings: AQUAFLOW, DVGW, EU, size and PN on the compression nut. Size and date of manufacture (clock format) on body. Pipe: AQUAFLOW, EN12201, size, PN and production date code (CDDMMY, where C = decade, and is replaced with 6 to indicate 2020).

Installation Requirements:

R001 R008

Expiry date:

31/10/2025

Model:

Aquaflow fittings & pipes for WRAS Approval AQUAFLOW COMPRESSION FITTINGS 20mm, 25mm, 32mm Male Adaptor 3200*****Q / Female Adaptor 320A*****Q / Male Elbow 322A*****Q / Female Elbow 322B*****Q / Wall Female Elbow 322D*****Q - The first *** denotes the 1st end diameter (016→16mm, 020→20mm etc). The last ** denotes the BSP thread (male or female) in inches (01→1/2”, 02→3/4”, 03→1” etc) Coupling 321******Q / Elbow 322******Q - The first *** denotes the 1st end diameter (016→16mm, 020→20mm etc). The last *** denotes the 2nd end diameter (016→16mm, 020→20mm etc). Reducing Coupling 321A*****Q - The first *** denotes the 1st end diameter (016→16mm, 020→20mm etc). The last ** denotes the 2nd end diameter (16→16mm, 20→20mm etc). Female Tee 3230*****Q / Male Tee 323A*****Q - The first *** denotes the 1st and 2nd end diameters (016→16mm, 020→20mm etc). The last ** denotes the BSP thread in the middle of the part (male or female) in inches (01→1/2”, 02→3/4”, 03→1” etc) End Plug 320B00***Q - The last *** denotes the nominal diameter (016→16mm, 020→20mm etc). Tee 324******Q - The first *** denotes the nominal diameter left and right (016→16mm, 020→20mm etc). The last *** denotes the nominal diameter of the middle connection (016→16mm, 020→20mm etc). Reducing Tee 324A*****Q - The first *** denotes the nominal diameter left and right (016→16mm, 020→20mm etc). The last ** denotes the nominal diameter of the middle connection (16→16mm, 20→20mm etc). Elbow Female For POP-UP 322C*****Q - The first *** denotes the 1st and 2nd end diameters (016→16mm, 020→20mm etc). The last ** denotes the BSP thread in the middle of the part in inches (01→1/2”, 02→3/4”) Repair Coupling 321B00***Q - The last *** denotes the nominal diameter of the connection (left and right the same) (016→16mm, 020→20mm etc). Universal Adaptor 321C*****Q - The first *** denotes the nominal diameter of the PE pipe connection (016→16mm, 020→20mm etc). The last ** denotes the nominal diameter of the alternative pipe material connection (15→15mm, 22→22mm, 28→28mm). Global Transition 321D0****Q- The first ** denotes the diameter of the alternative pipe material connection (22→22mm, 27→27mm, 34→34mm) . The last ** denotes the nominal diameter of the PE pipe connection (20→20mm, 25→25mm, 32→32mm). AQUAFLOW PE80 BLUE PIPES 20mm, 25mm, 32mm 21125020***Q - 20mmX2.3mm, SDR9, SF1.25, PN12.5 21125025***Q - 25mmX2.3mm, SDR11, SF1.25, PN12.5 21125032***Q - 32mmX3.0mm, SDR11, SF1.25, PN12.5 For the pipe codes, first two digits are the product code (same for all), next three digits state pressure rating (125 – PN12.5 bars), next three digits show external diameter of pipe (020 – 20mm) and last three digits are the length of the coil as customer prefers (025-25m, 050-50m, 100-100m)

Approval Holder:

Kalsi Plastics (UK) Limited

Company Name

Kalsi Plastics (UK) Limited

Address

Kalsi House 5 Tomey Road Sparkhill

Postcode

B11 2NJ

Country

Birmngham

General Email

george.argiropoulos@elysee.com.cy

View All Listings by this Company

Range of brass compression fittings for use with copper pipe (manufactured to IS EN 1057). Maximum working pressure 10.0 bar. Maximum operating temperature 99°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2105024

Size:

See model

Marking:

IDC logo: E mark (~E~ within circle) on fitting body. Size on nut.

Installation Requirements:

R001

Expiry date:

31/05/2026

Model:

Straight Coupling C x C: BF3104: 1¼” compression, BF3105: 1½” compression. Straight coupler M x C: BF3114: 1¼" BSP (M) x 1¼" compression, BF3115: 1½" BSP (M) x 1½" compression. Straight coupler F x C: BF3124: 1¼" BSP (F) x 1¼" compression, BF3125: 1½" BSP (F) x 1½" compression. Elbow C x C: BF3154: 1¼” compression, BF3155: 1½” compression. Elbow M x C: BF3164: 1¼" BSP (M) x 1¼" compression, BF3165: 1½" BSP (M) x 1½" compression. Elbow F x C: BF3174: 1¼" BSP (F) x 1¼" compression, BF3175: 1½" BSP (F) x 1½" compression. TEE C x C x C: BF3184: 1¼" compression, BF3185: 1½" compression. Tank Connector: BF3504: 1¼" compression, BF3505: 1½" compression. Stop End: BF3514: 1¼" compression, BF3515: 1½" compression. Blanking cap: BF3724: 1¼" compression, BF3725: 1½" compression. Blanking Plug: BF0744:1¼" compression, BF0745:1½" compression. Models added October 2021; Straight Coupling C x C: BF3106: 2” compression. Straight coupler M x C: BF3116: 2” BSP (M) X 2” compression. Straight coupler F x C: BF3126: 2" BSP (F) x 2" compression, Elbow C x C: BF3156: 2” compression. Elbow M x C: BF3166: 2" BSP (M) x 2" compression. Elbow F x C: BF3176: 2" BSP (F) x 2" compression. TEE C x C x C: BF3186: 2” compression. Tank Connector: BF3506: 2” compression.

Product Images

Approval Holder:

IDC Plumbing & Heating Technology (Beijing) Co., Ltd.

Company Name

IDC Plumbing & Heating Technology (Beijing) Co., Ltd.

Address

3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

Postcode

100015

Country

China

Phone

008610 51659550 ext 312

General Email

Jerry.tang@idcgroup.com.cn

View All Listings by this Company

Range of capillary solder ring fittings (bronze body) for use with copper tube (manufactured to to BS EN 1057). Maximum working pressure 25.0 bar. Maximum operating temperature 100°C.

Section:

1115 Fittings for use with Tube and Pipe

Section Subtitle:

Capillary, solder ring, lead free. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2106314

Note:

Above ground use only.

Size:

15mm – 54mm

Marking:

Kembla, size on body

Installation Requirements:

R001

Expiry date:

30/06/2026

Model:

SFEN – Female 90° Elbow 15mm x 1/2” code SFEN015 22mm x 1/2” code SFEN02215 22mm x 3/4" code SFEN022 28mm x 1” code SFEN028 SMEN – Male 90° Elbow 15mm x 1/2" code SMEN015 SREN – Reducing 90° Elbow 22 x 15mm code SREN02215 SFTE – Female Tee 15mm x 1/2" code SFTE015 22mm x 1/2" code SFTE02215 35mm x 3/4" code SFTE03522 35mm x 1” code SFTE03528 42mm x 3/4" code SFTE04222 42mm x 1” code SFTE04228 54mm x 3/4" code SFTE05422 54mm x 1” code SFTE05428 SFCE – Female Cross Tee 35mm x 3/4" code SFCE03522 35mm x 1” code SFCE03528 42mm x 3/4" code SFCE04222 42mm x 1” code SFCE04228 54mm x 3/4” code SFCE05422 54mm x 1” code SFCE05428 SFCC – Female Connector 15mm x 1/2" code SFCC015 22mm x 1/2" code SFCC02215 22mm x 3/4” code SFCC022 28mm x 1” code SFCC028 35mm x 1-1/4” code SFCC035 SMCC – Male Connector 15mm x 1/2" code SMCC015 22mm x 3/4” code SMCC022 28mm x 1” code SMCC028 35mm x 1-1/4” code SMCC035 42mm x 1-1/2” code SMCC042 54mm x 2” code SMCC054

Product Images

Approval Holder:

Kembla (HK) Limited

Company Name

Kembla (HK) Limited

Country

China

Phone

+852 2833 9308

General Email

charles.tam@kembla.com.hk

View All Listings by this Company

Range of brass compression fittings for use with copper pipe manufactured to EN1057. Maximum working pressure 16.0 bar. Maximum operating temperature 100°C.

Section:

1140 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, metal, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2103320

Size:

½”, ¾”, 1” compression. 8mm, 10mm, 12mm and 15mm compression.

Marking:

Irish insantantor, size and S (Sanbra Fyffe logo) on compression nut.

Installation Requirements:

R001

Expiry date:

31/03/2026

Model:

‘Irish Instantor’ range. 306998 No 310 1/2" x 12mm Straight Coupler 306999 No 310 1/2" x 10mm Straight Coupler 307000 No 310 1/2" x 8mm Straight Coupler 307005 No 310 1/2" x 15mm Straight Coupler 310001 No 310 1/2" Straight Coupler C x C 310002 No 310 3/4" Straight Coupler C x C 310003 No 310 1" Straight Coupler C x C 310021 No 310 3/4" x 1/2" Straight Coupler C x C 310031 No 310 1" x 1/2" Straight Coupler C x C 310032 No 310 1" x 3/4" Straight Coupler C x C 311001 No 311 1/2" Straight Coupler MI x C 311002 No 311 3/4" Straight Coupler MI x C 311003 No 311 1" Straight Coupler MI x C 311012 No P311 1/2" x 3/4" Straight Coupler MI x C 311021 No 311 3/4" x 1/2" Straight Coupler MI x C 311023 No P311 3/4" x 1" Straight Coupler MI x C 311032 No 311 1" x 3/4" Straight Coupler MI x C 312001 No 312 1/2" Straight Coupler FI x C 312002 No 312 3/4" Straight Coupler FI x C 312003 No 312 1" Straight Coupler FI x C 312012 No P312 1/2" x 3/4" Straight Coupler FI x C 312021 No 312 3/4" x 1/2" Straight Coupler FI x C 312023 No P312 3/4" x 1" Straight Coupler FI x C 312032 No 312 1" x 3/4" Straight Coupler FI x C 315001 No 315 1/2" Elbow C x C 315002 No 315 3/4" Elbow C x C 315003 No 315 1" Elbow C x C 315021 No 315 3/4" x 1/2" Elbow C x C 315032 No 315 1" x 3/4" Elbow C x C 316001 No 316 1/2" Elbow MI x C 316002 No 316 3/4" Elbow MI x C 316003 No 316 1" Elbow MI x C 316012 No P316 1/2" x 3/4" Elbow MI x C 316021 No 316 3/4" x 1/2" Elbow MI x C 316023 No P316 3/4" x 1" Elbow MI x C 316032 No 316 1" x 3/4" Elbow MI x C 317001 No 317 1/2" Elbow FI x C 317002 No 317 3/4" Elbow FI x C 317003 No 317 1" Elbow FI x C 317012 No P317 1/2" x 3/4" Elbow FI x C 317021 No 317 3/4" x 1/2" Elbow FI x C 317023 No P317 3/4" x 1" Elbow FI x C 317032 No 317 1" x 3/4" Elbow FI x C 318001 No 318 1/2" Equal Tee 318002 No 318 3/4" Equal Tee 318112 No 318 1/2" x 1/2" x 3/4" Red Tee 318211 No 318 3/4" x 1/2" x 1/2" Red Tee 318212 No 318 3/4" x 1/2" x 3/4" Red Tee 318221 No 318 3/4" x 3/4" x 1/2" Red Tee 318223 No 318 3/4" x 3/4" x 1 Red Tee 318311 No 318 1" x 1/2" x 1/2" Red Tee 318312 No 318 1" x 1/2" x 3/4" Red Tee 318313 No 318 1" x 1/2" x 1 Red Tee 318321 No 318 1" x 3/4" x 1/2" Red Tee 318322 No 318 1" x 3/4" x 3/4" Red Tee 318323 No 318 1" x 3/4" x 1 Red Tee 318331 No 318 1" x 1" x 1/2" Red Tee 318332 No 318 1" x 1" x 3/4" Red Tee 319001 No 317W 1/2" Wallplate Elbow 320002 No 320 3/4" Boiler Tee MI x C X C 320003 No 320 1" Boiler Tee MI x C x C 320322 No 320 1" x 3/4" x 3/4" Boiler Tee MIxCxC 321001 No 321 1/2" Wallplate Elbow 321002 No 321 3/4" Wallplate Elbow 321012 No P321 1/2" x 3/4" Wallplate Elbow 321023 No P321 3/4" x 1" Wallplate Elbow 323001 No 323 1/2" Cross 323002 No 323 3/4" Cross 330001 No 330 1/2" Tee C x C x FI 330002 No 330 3/4" Tee C x C x FI 330003 No 330 1" Tee C x C x FI 330221 No 330 3/4" x 3/4" x 1/2" C x C x FI 330331 No 330 1" x 1" x 1/2" Tee C x C x FI 330332 No 330 1" x 1" x 3/4" Tee C x C x FI 351001 No 351 1/2" Stop End 351002 No 351 3/4" Stop End 351003 No 351 1" Stop End 378001 No 378A 1/2" Coupling Nut 378002 No 378A 3/4" Coupling Nut 378003 No 378A 1" Coupling Nut

Product Images

Approval Holder:

Sanbra Fyffe Ltd.

Company Name

Sanbra Fyffe Ltd.

Address

Conex Works, Santry Avenue, Dublin

Postcode

D09 K160

Country

Ireland

Phone

353 1 842 6255

General Email

sales@sanbra.ie

View All Listings by this Company