Range of M profile press fit fittings with a brass body and NBR O-rings, for use with copper pipe manufactured to EN1057 and stainless-steel pipe manufactured to EN10312. Maximum working pressure: 10 Bar. Maximum operating temperature: 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240702016

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See Models.

Marking:

E logo and size on body.

Installation Requirements:

R001

Expiry date:

31/07/2029

Model:

Straight adaptor - Press fit x Female: 2PSFe1501 - 15MM x 1/2" (F) BSP, 2PSFe1502 - 15MM x 3/4" (F) BSP, 2PSFe2201 - 22MM x 1/2" (F) BSP, 2PSFe2202 - 22MM x 3/4" (F) BSP, 2PSFe2203 - 22MM x 1" (F) BSP, 2PSFe2802 - 28MM x 3/4" (F) BSP, 2PSFe2803 - 28MM x 1" (F) BSP, 2PSFe3503 - 35MMx 1" (F) BSP, 2PSFe3504 - 35MM X 11/4" (F) BSP, 2PSFe4205 - 42MM X 11/2" (F) BSP, 2PSFe5406 - 54MM X 2" (F) BSP. Straight adaptor - Press fit x Male: 2PSKe1501 - 15MM X 1/2" (M) BSP, 2PSKe1502 - 15MM X 3/4"(M) BSP, 2PSKe2201 - 22MM X 1/2" (M) BSP, 2PSKe2202 - 22MM X 3/4" (M) BSP, 2PSKe2203 - 22MM X 1" (M) BSP, 2PSKe2802 - 28MM X 3/4" (M) BSP, 2PSKe2803 - 28MM X 1" (M) BSP, 2PSKe3503 - 35MM X 1" (M) BSP, 2PSKe3504 - 35MM X 11/4" (M) BSP, 2PSKe4205 - 42MM X 11/2" (M) BSP, 2PSKe5406 - 54MM X 2" (M) BSP. Straight adaptor - Press fit x Swivel Female: 2PSQe1501 - 15MM X 1/2" (F) BSP SWIVEL, 2PSQe1502 - 15MM X 3/4" (F) BSP SWIVEL, 2PSQe2202 - 22MM X 3/4" (F) BSP SWIVEL, 2PSQe2203 - 22MM X 1" (F) BSP SWIVEL, 2PSQe2803 - 28MM X 1" (F) BSP SWIVEL, 2PSQe2804 - 28MM X 11/4" (F) BSP SWIVEL. Straight pipe union coupling - Press fit x Female/Male: 2PSHe1501 - 15MM X 1/2" (M) BSP UNION, 2PSHe2202 - 22MM X 3/4" (M) BSP UNION, 2PSHe2803 - 28MM X 1" (M) BSP UNION, 2PSHe3504 - 35MM X 1 1/4" (M) BSP UNION, 2PSHe4205 - 42MM X 1 1/2" (M) BSP UNION, 2PSHe5406 - 54MM X 2" (M) BSP UNION, 2PSGe1501 - 15MM X 1/2" (F) BSP UNION, 2PSGe2202 - 22MM X 3/4"(F) BSP UNION, 2PSGe2803 - 28MM X 1"(F) BSP UNION, 2PSGe3504 - 35MM X 1 1/4" (F) BSP UNION, 2PSGe4205 - 42MM X 1 1/2"(F) BSP UNION, 2PSGe5406 - 54MM X 2"(F) BSP UNION. 90°Elbow adaptor- Press fit x Female/Male: 2PSFe1501E - 15MM X 1/2" (F) BSP, 2PSFe2202E - 22MM X 3/4" (F) BSP, 2PSFe2803E - 28MM X 1" (F) BSP, 2PSKe1501E - 15MM X 1/2" (M) BSP, 2PSKe2202E - 22MM X 3/4" (M) BSP, 2PSKe2803E - 28MM X 1" (M) BSP. Elbow Wall Plate - Press fit x Female: 2PSRe1501 - 15MM X 1/2" (F) BSP. Branch Tee: Press fit x Female x Press fit: 2PSJe151501 - 15MM X 15MM X 1/2" (F) BSP, 2PSJe222201 - 22MM X 22MM X 1/2" (F) BSP, 2PSJe222202 - 22MM X 22MM X 34" (F) BSP, 2PSJe282801 - 28MM X 28MM X 1/2" (F) BSP, 2PSJe282802 - 28MM X 28MM X 3/4" (F) BSP, 2PSJe353501 - 35MM X 35MM X 1/2" (F) BSP, 2PSJe424201 - 42MM X 42MM X 1/2" (F) BSP, 2PSJe545401 - 54MM X 54MM X 1/2" (F) BSP.

Product Images

Approval Holder:

IDC Plumbing & Heating Technology (Beijing) Co., Ltd.

Company Name

IDC Plumbing & Heating Technology (Beijing) Co., Ltd.

Address

3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

Postcode

100015

Country

China

Phone

008610 51659550 ext 312

General Email

Jerry.tang@idcgroup.com.cn

View All Listings by this Company

Domestic hot water heat recovery unit incorporating a stainless steel plate heat exchanger. The product is supplied with 15mm x 15mm compression 90° elbows for installation on the inlet and outlet. Maximum operating pressure 10 bar. Maximum operating temperature 80°C

Section:

1350 Heat Exchangers

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15mm compression elbow

Marking:

Worcester (brand of the Bosch group), serial no., model name and technical information on adhesive label on outer casing.

Installation Requirements:

R001

Expiry date:

30/06/2029

Model:

Greenstar 8-718-644-603

Product Images

Approval Holder:

Bosch Termoteknik Isitma ve Klima Sanayi ve Ticaret A.S.

Company Name

Bosch Termoteknik Isitma ve Klima Sanayi ve Ticaret A.S.

Address

Organize Sanayi Bolgesi, 45030 Manisa, Turkey

View All Listings by this Company

Manufacturer:

Bosch Termoteknik Isitma ve Klima Sanayi ve Ticaret A.S.

Company Name

Bosch Termoteknik Isitma ve Klima Sanayi ve Ticaret A.S.

Address

Organize Sanayi Bolgesi, 45030 Manisa, Turkey

View All Listings by this Company

Range of electric instantaneous heated showers, incorporating a solenoid valve to control the flow. Products are supplied with a shower hose and handset. Maximum supply pressure 10 bar. Maximum operating temperature 45°C.

Section:

1370 Heaters

Section Subtitle:

Electric instantaneous, shower hose. Heat retained in instantaneous water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within the system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.

WRAS Approval Number:

240604704

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15mm compression.

Marking:

Mira, advanced and model on body and adhesive label on the underside.

Installation Requirements:

R001 R040

Expiry date:

30/06/2029

Model:

1.1785.001 - MIRA ADVANCE 8.7KW, 1.1785.002 - MIRA ADVANCE 9.8KW, 1.1785.003 - MIRA ADVANCE 8.7KW FLEX, 1.1785.004 MIRA ADVANCE 9.8KW FLEX, 1.1785.005 MIRA ADVANCE 8.7KW FLEX EXTRA, 1.1785.006 MIRA ADVANCE HEATLOOP 8.7KW,

Product Images

Approval Holder:

Kohler Mira Ltd.

Company Name

Kohler Mira Ltd.

Address

Cromwell Road Cheltenham Gloucestershire

Postcode

GL52 5EP

Country

United Kingdom

Phone

07425 645619

General Email

jon.barfield@mirashowers.com

View All Listings by this Company

Range of wall mounted gas fired condensing instantaneous water heaters. Maximum working pressure 10.0bar. Maximum operating temperature 85°C.

Section:

1465 Heaters

Section Subtitle:

Combination boilers and Water Jacketed Tube heaters. Low volume water content. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within the system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.

WRAS Approval Number:

240704704

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP(M) for 10-12L & 14~17L/min (Flow rate) ¾” BSP(M) for 22~26L/min (Flow rate)

Marking:

Company Logo Vanward, model, pressure, tempeture and and other technical info on adhesive label on side panel.

Installation Requirements:

R001

Expiry date:

31/07/2029

Model:

10~12L balance type & forces exhaust type gas water heater: JSG=balance type gas water heater, JSQ=forces exhaust type gas water, a= nominal heat input(kW) (fixed from 20, 22 to 24), b=volume (fixed from 10, 11 to 12), STc=Sd= the type of casing (c fixed from 27, 28 to 29, d fixed from 21, 25, 22, 21B, 23, 24, 25(A), 25(B), 26, 27, 28, 31, 32, 34 to 35) Casing 1: ST27, S21, Casing 2: ST28, S25, Casing 3: ST29, S22, Casing 4: S21B, Casing 5: S23, Casing 6: S24, Casing 7: S25(A), Casing 8: S25(B), Casing 9: S26, Casing 10: S27, Casing 11: S28, Casing 12: S31, Casing 13: S32, Casing 14: S34, Casing 15: S35. Where a typical code is: ①JSG28-14ST28、JSG14ST-S25: JSG=balance type gas water heater 28=nominal heat input(kW) 14=volume ST28=the type of casing, ST=structure platform S25=the type of casing 14~17L balance type & forces exhaust type gas water heater: JSG=balance type gas water heater, JSQ=forces exhaust type gas water, a= nominal heat input(kW) (fixed from 20, 22 to 24), b=volume (fixed from 10, 11 to 12), STc=Sd= the type of casing (c fixed from 27, 28 to 29, d fixed from 21, 25, 22, 21B, 23, 24, 25(A), 25(B), 27, 28, 31, 32, 34 to 35). Same casings as above but without casing 9. ②JSG14ST-S25(B) 、JSQ28-14ST28 JSG=balance type gas water heater JSQ=forces exhaust type gas water 14=volume 28=nominal heat input(kW) ST=structure platform S25(B)=the type of casing, ST28=the type of casing 22~26L outdoor type gas water heater: JSW=outdoor type gas water heater, a= nominal heat input(kW) (fixed from 44 to 52), b=volume (fixed from 22 to 26), ST58=Wd= the type of casing (d fixed from 81, 82, 83 to 84), Casing 1: ST58, W81, Casing 2: W82, Casing 3: W83, Casing 4: W84. ③JSW44-22ST58、 JSW22HT-W81: JSW=outdoor type gas water heater 44=nominal heat input(kW) 22=volume ST58=the type of casing, HT=structure platform W81=the type of casing

JSG20-10ST27, JSG10ST-S21, JSQ20-10ST27, JSQ10ST-S21, JSG22-11ST27, JSG11ST-S21, JSQ22-11ST27, JSQ11ST-S21, JSG24-12ST27, JSG12ST-S21, JSQ24-12ST27, JSQ12ST-S21, JSG20-10ST28, JSG10ST-S25, JSQ20-10ST28, JSQ10ST-S25, JSG22-11ST28, JSG11ST-S25, JSQ22-11ST28, JSQ11ST-S25, JSG24-12ST28, JSG12ST-S25, JSQ24-12ST28, JSQ12ST-S25, JSG20-10ST29, JSG10ST-S22, JSQ20-10ST29, JSQ10ST-S22, JSG22-11ST29, JSG11ST-S22, JSQ22-11ST29, JSQ11ST-S22, JSG24-12ST29, JSG12ST-S22, JSQ24-12ST29, JSQ12ST-S22, JSG10ST-S21B, JSQ10ST-S21B, JSG11ST-S21B, JSQ11ST-S21B, JSG12ST-S21B, JSQ12ST-S21B, JSG10ST-S23, JSQ10ST-S23, JSG11ST-S23, JSQ11ST-S23, JSG12ST-S23, JSQ12ST-S23, JSG10ST-S24, JSQ10ST-S24, JSG11ST-S24, JSQ11ST-S24, JSG12ST-S24, JSQ12ST-S24, JSG10ST-S25(A), JSQ10ST-S25(A), JSG11ST-S25(A), JSQ11ST-S25(A), JSG12ST-S25(A), JSQ12ST-S25(A), JSG10ST-S25(B), JSQ10ST-S25(B), JSG11ST-S25(B), JSQ11ST-S25(B), JSG12ST-S25(B), JSQ12ST-S25(B), JSG10ST-S26, JSQ10ST-S26, JSG12ST-S26, JSQ12ST-S26, JSG10ST-S27, JSQ10ST-S27, JSG12ST-S27, JSQ12ST-S27, JSG10ST-S28, JSQ10ST-S28, JSG12ST-S28, JSQ12ST-S28, JSG10ST-S31, JSQ10ST-S31, JSG12ST-S31, JSQ12ST-S31, JSG10ST-S32, JSQ10ST-S32, JSG12ST-S32, JSQ12ST-S32, JSG10ST-S34, JSQ10ST-S34, JSG12ST-S34, JSQ12ST-S34, JSG10ST-S35, JSQ10ST-S35, JSG11ST-S35, JSQ11ST-S35, JSG12ST-S35, JSQ12ST-S35. JSG28-14ST27, JSG14ST-S21, JSQ28-14ST27, JSQ14ST-S21, JSG30-16ST27, JSG16ST-S21, JSQ30-16ST27, JSQ16ST-S21, JSG31-17ST27, JSG17ST-S21, JSQ31-17ST27, JSQ17ST-S21, JSG28-14ST28, JSG14ST-S25, JSQ28-14ST28, JSQ14ST-S25, JSG30-16ST28, JSG16ST-S25, JSQ30-16ST28, JSQ16ST-S25, JSG31-17ST28, JSG17ST-S25, JSQ31-17ST28, JSQ17ST-S25, JSG28-14ST29, JSG14ST-S22, JSQ28-14ST29, JSQ14ST-S22, JSG30-16ST29, JSG16ST-S22, JSQ30-16ST29, JSQ16ST-S22, JSG31-17ST29, JSG17ST-S22, JSQ31-17ST29, JSQ17ST-S22, JSG14ST-S21B, JSQ14ST-S21B, JSG16ST-S21B, JSQ16ST-S21B, JSG17ST-S21B, JSQ17ST-S21B, JSG14ST-S23, JSQ14ST-S23, JSG16ST-S23, JSQ16ST-S23, JSG17ST-S23, JSQ17ST-S23, JSG14ST-S24, JSQ14ST-S24, JSG16ST-S24, JSQ16ST-S24, JSG17ST-S24, JSQ17ST-S24, JSG14ST-S25(A), JSQ14ST-S25(A), JSG16ST-S25(A), JSQ16ST-S25(A), JSG17ST-S25(A), JSQ17ST-S25(A), JSG14ST-S25(B), JSQ14ST-S25(B), JSG16ST-S25(B), JSQ16ST-S25(B), JSG17ST-S25(B), JSQ17ST-S25(B), JSG14ST-S27, JSQ14ST-S27, JSG16ST-S27, JSQ16ST-S27, JSG14ST-S28, JSQ14ST-S28, JSG16ST-S28, JSQ16ST-S28, JSG14ST-S31, JSQ14ST-S31, JSG16ST-S31, JSQ16ST-S31, JSG14ST-S32, JSQ14ST-S32, JSG16ST-S32, JSQ16ST-S32, JSG14ST-S34, JSQ14ST-S34, JSG16ST-S34, JSQ16ST-S34, JSG14ST-S35, JSQ14ST-S35,JSG16ST-S35, JSQ16ST-S35. JSW44-22ST58, JSW22HT-W81, JSW52-26ST58, JSW26HT-W81, JSW22HT-W82, JSW26HT-W82, JSW22HT-W83, JSW26HT-W83, JSW22HT-W84, JSW26HT-W84.

Product Images

Approval Holder:

Guangdong Vanward New Electric Co. Ltd.

Company Name

Guangdong Vanward New Electric Co. Ltd.

Address

13 Jianye Mid- Road Shunde High Tech Industry Development Zone

Country

Ronggui Shunde

View All Listings by this Company

Manufacturer:

Guangdong Vanward New Electric Co. Ltd.

Company Name

Guangdong Vanward New Electric Co. Ltd.

Address

13 Jianye Mid- Road Shunde High Tech Industry Development Zone

Country

Ronggui Shunde

View All Listings by this Company

Range of water meters with brass bodies and plastic impellers. Maximum working pressure 16.0 bar. Maximum operating temperature 95°C.

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN15, DN20, DN25, DN32, DN40, DN50.

Marking:

NWM, Ningbo Water Meter Co., Ltd logo and technical information on meter face. Flow arrow and size on body.

Installation Requirements:

R001

Expiry date:

30/06/2029

Model:

MJ-SDC range.

Approval Holder:

Ningbo Water Meter (Group) Co., Ltd

Company Name

Ningbo Water Meter (Group) Co., Ltd

Address

No 355 Hongxing Road Jiangbei District Ningbo

Country

China

View All Listings by this Company