Directory Search Results

Print List

#2306704

‘Axor’ wall mounted shower outlet (brass body – various finishes). The shower outlet incorporates an approved check valve cartridge; however, the complete assembly has not been fully tested to demonstrate that it provides adequate backflow protection. Maximum operating temperature 70.0°C

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
2306704
Size:
½” BSP (M)
Marking:
Axor on the front plate.
Installation Requirements:
R001 R040
Expiry date:
30/06/2028
Model:
45 723 xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#2304027

Range of shower handsets with plastic bodies (various finishes - see model). The inlet incorporates a combined EPDM washer and stainless-steel strainer.

Non-metallic materials and components comply with BS6920 at 65°C

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
2304027
Size:
½” BSP (M)
Marking:
Gjosa on body.
Installation Requirements:
R001 R040
Expiry date:
30/04/2028
Model:
GS31XXV02Y GS11XXV01Y Where: XX denotes the finish, and can replaced with any of the following: 00 = Deep Black, 04 = White, 03 = Cool Grey, 01 = Silver. Y denotes packaging: Blank = bag, R = retail box, W = carton box.
Product Images

Approval Holder:
Gjosa
Company Name
Gjosa
Address
La Haute Route 78 2502 Bienne, Switzerland

View All Listings by this Company

Print This Approval


#2305702

Range of ceiling or wall mounted shower outlets, (brass or stainless-steel bodies - various finishes) incorporating EPDM `O` rings. Maximum operating temperature 60.0°C

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
2305702
Size:
¾” BSP (M)
Marking:
VOLA on shower face
Installation Requirements:
R001 R040
Expiry date:
31/05/2028
Model:
VOLA 060-XX Brass VOLA 060-XX Stainless Steel VOLA 060A-XX Brass VOLA 060A-XX Stainless steel Model VOLA 060-XX, VOLA 060A-XX. Brass and Stainless-Steel variants are available with different surface finishes. Suffix “XX” indicate the number of surface finish and denotes: For Brass: 02=Grey, 04=Blue, 05=Orange, 06=Light Green, 08=Yellow, 09=Dark Grey, 12=Mocca, 14=Bright Red, 15=Dark Blue, 16=Chrome, 17=Gloss Black, 18=White, 19=Natural Brass, 20=Brushed Chrome, 21=Carmine Red, 25=Pink, 27=Matt Black, 28=Matt White, 60=Black, 62=Deep Black, 63=Copper, 65=Gold, 68=Nickel. For Stainless Steel: 40=Stainless Steel, 61=Brushed Black, 64=Brushed Copper, 70=Brushed Gold.

Approval Holder:
Vola A/S
Company Name
Vola A/S
Address
Lunavej 2 Horsens
Postcode
8700
Country
Denmark
Phone
+4576284846
General Email
mk@vola.dk

View All Listings by this Company
Manufacturer:
Vola A/S
Company Name
Vola A/S
Address
Lunavej 2 Horsens
Postcode
8700
Country
Denmark
Phone
+4576284846
General Email
mk@vola.dk

View All Listings by this Company

Print This Approval


#2304045

A range of ceiling mounted and wall mounted shower outlets (brass and stainless-steel bodies - various finishes) incorporating EPDM O-rings.

Non-metallic materials and components comply with BS6920 at 60°C

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
2304045
Size:
¾” BSP (M)
Marking:
VOLA on body
Installation Requirements:
R001 R040
Expiry date:
30/04/2028
Model:
VOLA 050-XX Head shower, Wall mounted VOLA 050A-XX Head shower, Ceiling mounted VOLA 050K-XX Adjustable body jet Model VOLA 050-XX, VOLA 050A-XX, VOLA 050K-XX. Brass and Stainless-Steel variants are available with different surface finishes. Suffix “XX” indicate the number of surface finish and denotes: For Brass: 02=Grey, 04=Blue, 05=Orange, 06=Light Green, 08=Yellow, 09=Dark Grey, 12=Mocca, 14=Bright Red, 15=Dark Blue, 16=Chrome, 17=Gloss Black, 18=White, 19=Natural Brass, 20=Brushed Chrome, 21=Carmine Red, 25=Pink, 27=Matt Black, 28=Matt White, 60=Black, 62=Deep Black, 63=Copper, 65=Gold, 68=Nickel. For Stainless Steel: 40=Stainless Steel, 61=Brushed Black, 64=Brushed Copper, 70=Brushed Gold.
Product Images

Approval Holder:
Vola A/S
Company Name
Vola A/S
Address
Lunavej 2 Horsens
Postcode
8700
Country
Denmark
Phone
+4576284846
General Email
mk@vola.dk

View All Listings by this Company
Manufacturer:
Vola A/S
Company Name
Vola A/S
Address
Lunavej 2 Horsens
Postcode
8700
Country
Denmark
Phone
+4576284846
General Email
mk@vola.dk

View All Listings by this Company

Print This Approval


#2304055

Range of overhead shower outlets, (plastic bodies - various finishes), incorporating a stainless-steel strainer.

Non-metallic materials and components comply with BS6920 at 60°C

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
2304055
Size:
½” BSP (F)
Marking:
Hansgrohe on shower face
Installation Requirements:
R001 R040
Expiry date:
30/04/2028
Model:
27 441 xxx Hansgrohe Croma 100 Vario Overhead Shower 27 443 xxx Hansgrohe Croma 100 Multi Overhead Shower 28 462 xxx Hansgrohe Croma 100 Vario EcoSmart Overhead Shower Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#2304056

Range of ceiling mounted overhead shower outlets, (plastic bodies - various finishes), incorporating a stainless-steel strainer and flow regulator.

Non-metallic materials and components comply with BS6920 at 60°C

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
2304056
Size:
½” BSP (M)
Marking:
HANSGROHE on shower face
Installation Requirements:
R001 R040
Expiry date:
30/04/2028
Model:
26 604 xxx Hansgrohe Raindance E 360 Air 1jet overhead shower with ceiling connector 100 mm EcoSmart 9 l/min 26 605 xxx Hansgrohe Raindance E 360 Air 1jet overhead shower with shower arm 390 mm EcoSmart 9 l/min 27 380 xxx Hansgrohe Raindance E 240 Air 1jet overhead shower with ceiling connector 100 mm 27 383 xxx Hansgrohe Raindance E 240 Air 1jet overhead shower EcoSmart 9 l/min with ceiling connector 100 mm Models added April 2025: 27370xx0, 27371xx0, 27375xx0, 27376xx0, 27381xx0, 304267xx (showerpipe), 304292xx (showerpipe) & 334267xx (showerpipe). Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#2304077

Range of overhead shower and shower arm assemblies, (brass bodies - various finishes), incorporating a flow restrictor and stainless steel strainer on the inlet.

Non-metallic materials and components comply with BS6920 at 60°C

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
2304077
Size:
½” BSP (M)
Marking:
Hansgrohe on body
Installation Requirements:
R001 R040
Expiry date:
30/04/2028
Model:
Shower Head – 24 330 xx0, 24 331 xx0, 24 333 xx0 Shower Arm – 24 337 xx0, 24 338 xx0, 24 339 xx0 Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#2304307

Range of shower handsets (plastic bodies – various finishes).

Non-metallic materials and components comply with BS6920 at 60°C

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
2304307
Size:
½” BSP (M)
Marking:
Kohler on body
Installation Requirements:
R001 R040
Expiry date:
30/04/2028
Model:
26282W-** & 26282W-G-** ** denotes finish: 2BZ - Oil Rubbed Bronze, BZ - Antique Bronze, SA - Antique Silver, 96 - Biscuit, 7 - Black, W7 - Black Nickel, LB - Bronze, G - Brushed Chrome, AG - Brushed Nickel, BS - Brushed Stainless, FGN - Chartreuse, FRD - Cherry Red, GN - Gunmetal, BL - Matte Black, YG - Matte Gold, FNY - Navy Blue, AD - Nickel Silver, R2B - Oil Rubbed Bronze-Gold, CP - Polished Chrome, 1CP - Polished Chrome, ABS PGD - Polished Gold, 24K - Polished Gold, S - Polished Stainless, AGP PVD - Brushed Nickel, 24P PVD - Polished Gold, ADP PVD - Silver Nickel, BG - Retro Blue, RGD - Rose Gold, TB - Satin Black, SSL - Sterling Silver, TT - Titanium, ULB - Un-lacquered Brass, BV - Vibrant Brushed Bronze, BN - Vibrant Brushed Nickel, AF - Vibrant French Gold, BGD - Vibrant Modern Brushed Gold, PB - Vibrant Polished Brass, SN - Vibrant Polished Nickel, VS - Vibrant Stainless, VNT - Vintage Nickel, W6 - Weathered Bronze, 0 - White, 2MB - Modern Brass
Product Images

Approval Holder:
Kohler Mira Ltd.
Company Name
Kohler Mira Ltd.
Address
Cromwell Road Cheltenham Gloucestershire
Postcode
GL52 5EP
Country
United Kingdom
Phone
07425 645619
General Email
jon.barfield@mirashowers.com

View All Listings by this Company
Manufacturer:
Kohler Mira Ltd.
Company Name
Kohler Mira Ltd.
Address
Cromwell Road Cheltenham Gloucestershire
Postcode
GL52 5EP
Country
United Kingdom
Phone
07425 645619
General Email
jon.barfield@mirashowers.com

View All Listings by this Company

Print This Approval


#2301362

Range of shower outlets with brass bodies (various finishes) and NBR ‘O’-rings. Maximum working pressure 5.0 bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
2301362
Size:
15mm compression
Marking:
Bagnodesign on body
Installation Requirements:
R001 R040
Expiry date:
31/01/2028
Model:
BDD-ION-113030-B-LZ (LACQUERED ZANZIBAR) BDD-ION-113030-A-MB (MATT BLACK) BDD-ION-113030-A-RCP (SANTIAGO) BDD-ION-113030-A-SBZ (SOFT BRONZE) BDD-ION-113030-A-AN (ANTHRACITE) BDD-ION-113030-A-CR (BRUSHED COPPER) “KOY SHOWER HEAD DIA. 300”

Approval Holder:
BagnoDesign
Company Name
BagnoDesign
Address
Unit 1 Oakwell Park Trading Estate Birstall
Country
WF17 9LU

View All Listings by this Company

Print This Approval


#2012113

Range of shower handsets with chromium plated ABS bodies. Maximum operating temperature 75°C.

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
2012113
Size:
½” BSP (M)
Marking:
Harrison Bathrooms Logo on body.
Installation Requirements:
R001 R040
Expiry date:
31/12/2025
Model:
WM-BB03-BB, WM-BB03-CH, WM-BB03-BN & WM-BB03-BL HAND SHOWERS SHOWER OUTLETS

Approval Holder:
Harrison Bathrooms Incorporating Scudo
Company Name
Harrison Bathrooms Incorporating Scudo
Address
Prospect Works Keighley West Yorkshire
Postcode
BD21 4LA
Country
United Kingdom
Phone
01535 663024
General Email
adam.barnsley@harrisonbathrooms.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 581 of 1111

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.