‘R-4401, E-44131, E-4413, E-4414, E-4420, E440001, E441001, E440002, E441002, E-5402, E-5403, E-5404, E540001. E541001, E540002, E540003, E541003 & E440007’. Factory applied, grey-blue coloured enamel coatings. Apply as per manufacturer’s instructions ‘issue 02/2016’ dated 05.10.2016. Cure for 6 minutes@840°C. For use with water up to 85°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5030 Coatings, Paints & Linings

Section Subtitle:

Factory applied pipe & fittings coatings.

WRAS Approval Number:

2211529

Expiry date:

30/11/2027

Approval Holder:

EMO FRITE d.o.o

Company Name

EMO FRITE d.o.o

Address

Mariborska 86, 3000 Celje, Slovenia

View All Listings by this Company

'Poly Guard-HBSFLE-FG-8248 (red)'. Red coloured, 2 component (base and hardener) epoxy coating. Mix and apply as per manufacturer's 'Product Data Sheet and Application Instructions TRPL' issued 'Oct 2015'. revision '02, Dt: 15th Feb-21'. Cure for 7 days at 25°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5030 Coatings, Paints & Linings

Section Subtitle:

Factory applied pipe & fittings coatings.

WRAS Approval Number:

2211563

Expiry date:

30/11/2027

Approval Holder:

Thakor Reductants Pvt Ltd

Company Name

Thakor Reductants Pvt Ltd

Address

Plot No.810/3-A, Road No.8, GIDC, Sachin, Surat-394230, GUJ.

Country

India

View All Listings by this Company

'Monolevel 844SP'. Site applied, grey coloured, polymer modified cementitious mortar. Mix mortar with water in a weight ratio of 5:0.6. Apply as per manufacturer's instructions 'Bulletin No. ML844SP/031/010' issued July 2020. Cure for 21 days@7°C. For use with water up to 23°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5038 Coatings, Paints & Linings

Section Subtitle:

Site applied concrete coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.

WRAS Approval Number:

2202569

Expiry date:

28/02/2027

Approval Holder:

Flexcrete Technologies Ltd.

Company Name

Flexcrete Technologies Ltd.

Address

Tomlinson Road, Leyland, Lancashire

Postcode

PR25 2DY

Phone

0845 2607005

General Email

Info@flexcrete.com

View All Listings by this Company

‘ECOCLEAR White Gray 9098’. Off-white/grey coloured, hot pressed GRP single layered panel. For use with water up to 55°C.

Section:

5120 Glass Reinforced Plastics (GRP)

Section Subtitle:

Components.

WRAS Approval Number:

2302509

Expiry date:

29/02/2028

Approval Holder:

ECOCLEAR Co. Ltd.

Company Name

ECOCLEAR Co. Ltd.

Address

53-1 1288 Beon-gil, Gimhaedae-Ro Hallim-Myeon Gimhae-si, Gyeongsangnam-do, 50581

Country

Korea, Republic of

View All Listings by this Company

'TapTec™ SR1L Na'. Amber coloured, ion exchange resin. For use with water up to 85°C.

Section:

5150 Ion Exchange Resin

Expiry date:

31/10/2027

Approval Holder:

Specialty Electronic Materials Switzerland GmbH.

Company Name

Specialty Electronic Materials Switzerland GmbH.

Address

Grossmatte 4, 6014, Luzern

Country

Switzerland

View All Listings by this Company