Range of two-way manual diverter valves with shut-off position. Products are for insertion into specifically dimensioned bodies. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:

2050 Diverter

Section Subtitle:

Diverter cartridge(s) with manual adjustment.

WRAS Approval Number:

241002020

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

26mm O.D.

Marking:

HG on body

Installation Requirements:

R001

Expiry date:

31/10/2029

Model:

30079500 & 30650210

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Range of concealed and exposed two-way diverters, (brass bodies – various finishes, trim sets and operating members). The inlets on XX1650YY and XX1721YY models incorporate approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 Bar. Maximum operating temperature 85°C (PSA019 YY, PSA020 YY & XX1782YY) Maximum operating temperature 60°C (PSH049, XX1650YY, RZ/1721 & XX1721YY).

Section:

2050 Diverter

Section Subtitle:

Diverter cartridge(s) with manual adjustment.

WRAS Approval Number:

250202002

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Compression models are for use with copper pipe (manufactured to BS EN 1057)

Size:

½” BSP (M) (XX1650YYY & XX1721YYY) 19mm compression fitting (XX1782YY)

Marking:

Lefroy Brooks logo on body (XX1782YY) or operating member (XX1650YY & XX1721YY)

Installation Requirements:

R001 R010 R040

Expiry date:

28/02/2030

Model:

Exposed PSA019YY PSA020YY Concealed XX1782YY XX1650YY XX1721YY Rough insets only: PSH049 RZ/1721 Where XX denotes the type of trim/operating members and can be replaced with any of the following, as examples: LB (Classic cross handle) LS (Classic star handle) BL (Classic lever black ceramic) WL (Classic lever white ceramic) CH (Connaught cross handle) CR (Black crystal lever) FH (La Chapelle cross handle) FM (La Chapelle lever metal) FB (La Chapelle lever black ceramic) FW (La Chapelle lever white ceramic) MH (Mackintosh cross handle) ML (Mackintosh lever) MB (Mackintosh black lever) TH (Ten Ten handwheel) TL (Ten Ten lever) Where YY denotes the colour/plating options and can be replaced with any of the following as examples: CP = Polished Chrome NK = Polished Nickel BC = Brushed Chrome BN = Brushed Nickel PB = Polished Brass BPB = Brushed Brass AB = Aged Brass TA = Taunton AG = Antique Gold HRG = Hard Rubbed Gold CM = Champagne Gold BCM = Brushed Champagne Gold CO = Copper MBC = Matt Black Chrome

Approval Holder:

Lefroy Brooks

Company Name

Lefroy Brooks

Address

Unit 3 Marston Industrial Estate Marston Road Wolverhampton

Postcode

WV2 4LX

Country

United Kingdom

Phone

01902 390 891

General Email

rob@lefroybrooks.co.uk

View All Listings by this Company

Range of pre-set pressure relief valves incorporating DZR brass bodies and an EPDM diaphragms and PTFE washers. The valve is fitted with hand operated rotating easing gear. Maximum working – see model. Maximum operating temperature 85°C

Section:

2210 Valves

Section Subtitle:

Pressure relief.

WRAS Approval Number:

250604703

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

see model

Marking:

SYR, size, DR and flow arrow on body. Size, Reliance logo, PREL 102 and pressure rating on cap.

Installation Requirements:

R001

Expiry date:

1/06/2030

Model:

PREL102014 1/2” FBSP x 1/2” FBSP 3.5 Bar PREL102008 1/2” FBSP x 1/2” FBSP 5.0 Bar PREL102001 1/2” FBSP x 1/2” FBSP 6.0 Bar PREL102025 1/2” FBSP x 1/2” FBSP 7.0 Bar PREL102004 1/2” FBSP x 1/2” FBSP 8.0 Bar PREL102040 1/2” MBSP x 1/2” FBSP 3.5 Bar PREL102041 1/2” MBSP x 1/2” FBSP 5.0 Bar PREL102042 1/2” MBSP x 1/2” FBSP 6.0 Bar PREL102043 1/2” MBSP x 1/2” FBSP 8.0 Bar PREL102009 1/2” MBSP x 15mm 3.5 Bar PREL102003 1/2” MBSP x 15mm 5.0 Bar PREL102005 1/2” MBSP x 15mm 6.0 Bar PREL102044 1/2” MBSP x 15mm 8.0 Bar PREL102045 3/4” FBSP x 3/4” FBSP 3.5 Bar PREL102046 3/4” FBSP x 3/4” FBSP 5.0 Bar PREL102031 3/4” FBSP x 3/4” FBSP 6.0 Bar PREL102047 3/4” FBSP x 3/4” FBSP 8.0 Bar PREL102048 3/4” MBSP x 3/4” FBSP 3.5 Bar PREL102118 3/4” MBSP x 3/4” FBSP 5.0 Bar PREL102018 3/4” MBSP x 3/4” FBSP 6.0 Bar PREL102024 3/4” MBSP x 3/4” FBSP 8.0 Bar PREL102020 3/4” MBSP x 22mm 3.5 Bar PREL102049 3/4” MBSP x 22mm 5.0 Bar PREL102027 3/4” MBSP x 22mm 6.0 Bar PREL102050 3/4” MBSP x 22mm 8.0 Bar PREL102023 3/4” FBSP x 3/4” FBSP 4.0 Bar PREL102110 1/2” MBSP x 1/2” MBSP 4.0 Bar PREL102111 1/2” MBSP x 15mm 4.0 Bar PREL102105 1/2” MBSP x 15mm 6.0 Bar

Approval Holder:

Reliance Worldwide Corporation (UK) Ltd

Company Name

Reliance Worldwide Corporation (UK) Ltd

Address

Horton Road, West Drayton

Postcode

UB7 8JL

Country

United Kingdom

Phone

+44 7730 052060

General Email

PETER.LANCASTER@RWC.COM

View All Listings by this Company

Range of lever or butterfly operated spherical valves with brushed chromium plated brass bodies, chromium plated brass ball and PTFE seat. Maximum working pressure model K656: ¼” to ½” = 64.0 bar, ¾” to 1¼” = 50.0 bar, 1½” to 2” = 40.0 bar, 2½” to 4” = 25.0 bar. Model K6566 model: ¼” to ⅜” = 64.0 bar, ¾” to 1¼” = 50.0 bar, 1½” to 2” = 40.0 bar, 2½” to 4” = 25.0 bar. Models K8912 , K8913 & K6568 models: ¼” to ⅜” = 64.0 bar. Maximum operating temperature 99°C.

Section:

2260 Valves

Section Subtitle:

Spherical, metal.

WRAS Approval Number:

240902071

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See Model list

Marking:

RB logo, Size, Pressure, material and other information on body

Installation Requirements:

R001

Expiry date:

30/09/2029

Model:

K8912 from ¼” to 3/8” A numerical digit is added to the end of the model to indicate size; 1 = 8mm. 2 = 10mm. - ¼” to ⅜” BSP (F) inlet/outlet (Steel handle). K8912 from ¼” to 3/8” A numerical digit is added to the end of the model to indicate size; 1 = 8mm. 2 = 10mm. K8913 from ¼” to 3/8” A numerical digit is added to the end of the model to indicate size; 1 = 8mm. 2 = 10mm. K6568 from ¼” to 3/8” A numerical digit is added to the end of the model to indicate size; 1 = 8mm. 2 = 10mm. K6566 from ¼” to 3/8” A numerical digit is added to the end of the model to indicate size; 1 = 8mm. 2 = 10mm. K656 from 2”1/2 to 4” Two numerical digits are added to the end of the model to indicate size; 69 = 65mm. 70 = 80mm. 71= 100mm. K66020 JET BBV21R RED LEVERBSPPBALLVALVE 65 Jet BBV21EXT extended spindle bspp ball valve K65731 8mm K65732 10mm K65733 15mm K65734 20mm K65735 25mm K65736 32mm K65737 40mm K65738 50mm K65739 65mm K65740 80mm K65741 100mm Jet BBV21LL locking lever operated bspp ball valve K65751 8mm K65752 10mm K65753 15mm K65754 20mm K65755 25mm K65756 32mm K65757 40mm K65758 50mm

Approval Holder:

Wolseley UK Ltd.

Company Name

Wolseley UK Ltd.

Address

2 Kingmaker Court, Warwick Technology Park, Warwick

Postcode

CV34 6DY

Country

United Kingdom

Phone

01926705792

General Email

martin.lister@wolseley.co.uk

View All Listings by this Company

‘Instantor’ range of lever operated spherical valves with brass bodies and balls (chromium plated), incorporating PTFE seats, EPDM ‘o’ rings single lever handles (red or blue). For use with imperial Irish copper pipe (manufactured to IS EN 1057). Maximum working pressure 16 bar. Maximum operating temperature 85°C

Section:

2260 Valves

Section Subtitle:

Spherical, metal.

WRAS Approval Number:

241004038

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

see model

Marking:

Instantor and product info on lever. Sanbra logo, DN & PN on body.

Installation Requirements:

R001

Expiry date:

31/10/2029

Model:

771788 – 1/2” (14.7mm) compression, 771789 – 3/4” (21mm) compression, 771790 – 1” (27.4mm) compression. Lever handles are either a Red or Blue PVC finish - denoted with a ‘R or a ‘B’ at end of the codes.

Approval Holder:

Sanbra Fyffe Ltd.

Company Name

Sanbra Fyffe Ltd.

Address

Instantor Works Santry Avenue Dublin

Postcode

D09 K160

Country

Ireland

Phone

+353(0)1 842 6255

General Email

Ryan.Charleson@Instantor.ie

View All Listings by this Company