Directory Search Results

Print List

#2212077

Range of single hole, single outlet, electronically controlled tap assemblies (chrome plated brass body). The flow is controlled by a solenoid valve activated via an infra-red sensor. The spout outlet incorporates a plastic aerator. Supplied with a stainless steel braided PEX lined flexible connection hose. Maximum working pressure 8.0 Bar.

Non-metallic materials and components comply with BS6920 at 70°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
2212077
Size:
10mm spigot.
Marking:
Stern on tap body.
Installation Requirements:
R001 R006 R007
Expiry date:
31/12/2027
Model:
350700, 350750, 350700-DP, 350750-DP.
Product Images

Approval Holder:
Y. Stern Engineering (1989) Ltd
Company Name
Y. Stern Engineering (1989) Ltd
Address
15 Gan Rave Blvd. Yavne
Postcode
8122217
Country
Israel
Phone
+972 8 9326007
General Email
leah@sternfaucets.com

View All Listings by this Company
Manufacturer:
Y. Stern Engineering (1989) Ltd
Company Name
Y. Stern Engineering (1989) Ltd
Address
15 Gan Rave Blvd. Yavne
Postcode
8122217
Country
Israel
Phone
+972 8 9326007
General Email
leah@sternfaucets.com

View All Listings by this Company

Print This Approval


#2112367

Range of concealed WC flushing cisterns incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2112367
Size:
½” BSP (M)
Marking:
Tissino on flush plate, Tissino on label inside cistern and 6l water line.
Installation Requirements:
R001 R556 R571
Expiry date:
31/12/2026
Model:
TRC-101 ROCCO 2 & TRC-107 ROCCO 2

Approval Holder:
Tissino Ltd.
Company Name
Tissino Ltd.
Address
Unit 2 A Lyncastle Road Appleton Thorn Warrington
Postcode
WA4 4SN
Country
Cheshire

View All Listings by this Company

Print This Approval


#2112368

Range of concealed WC flushing cisterns incorporating a side entry BS1212-4 (2016) compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2112368
Size:
½” BSP (M)
Marking:
Tissino on flush plate, Tissino on label inside cistern and 6l water line.
Installation Requirements:
R001 R556
Expiry date:
31/12/2026
Model:
TRC-104 ROCCO 2 SLIMLINE & TRC-106 ROCCO 2

Approval Holder:
Tissino Ltd.
Company Name
Tissino Ltd.
Address
Unit 2 A Lyncastle Road Appleton Thorn Warrington
Postcode
WA4 4SN
Country
Cheshire

View All Listings by this Company

Print This Approval


#2206330

Concealed WC flushing cisterns incorporating a BS 1212-4 side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 3 litres. The cistern is operated by a manual push button and incorporates a angle valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2206330
Size:
3/8” BSP Captive nut
Marking:
Alca on adhesive label on cistern, Alca printed on flush plate. 6L & waterline moulded within cistern.
Installation Requirements:
R001 R556 R571 R581
Expiry date:
30/06/2027
Model:
AM101
Product Images

Approval Holder:
Alcadrain, s.r.o.
Company Name
Alcadrain, s.r.o.
Address
Komunardů 1626/35, Praha 7 - Holešovice 170 00 Czech Republic
Country
Czech Republic

View All Listings by this Company
Manufacturer:
Alcadrain, s.r.o.
Company Name
Alcadrain, s.r.o.
Address
Komunardů 1626/35, Praha 7 - Holešovice 170 00 Czech Republic
Country
Czech Republic

View All Listings by this Company

Print This Approval


#2107149

Range of floor mounted, single hole, single outlet (fixed), combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member and a manual diverter to shower outlet. The spout has a waterfall outlet. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0675 Combination Tap Assemblies
Section Subtitle:
Multi-hole tap(s) with a single outlet and a fixed spout, incorporating a self-cancelling diverter to a shower outlet.
WRAS Approval Number:
2107149
Size:
M12 (F)
Marking:
Niagara (Brand of Cavalier) & Model on body
Installation Requirements:
R001 R020 R160
Expiry date:
31/07/2026
Model:
9088, 9088BL & 9088BRS COMBINATION TAP ASSEMBLIES

Approval Holder:
Cavalier Marketing Ltd.
Company Name
Cavalier Marketing Ltd.
Address
Unit 2 Riverside Business Park Royd Ings Avenue Keighley
Postcode
BD21 4AF
Country
West Yorkshire
Phone
01535 613 830
General Email
sales@cavaliermarketing.co.uk

View All Listings by this Company

Print This Approval


#2212329

Range of flushing valves (gunmetal body) which incorporate a screw down stop valve, spherical valve and air gap to drain. Maximum working pressure 10.0 bar. Cold water use only.

Section:
0046 Backflow Prevention Devices
Section Subtitle:
Miscellaneous.
WRAS Approval Number:
2212329
Size:
Range of flushing valves (gunmetal body) which incorporate a screw down stop valve, spherical valve and air gap to drain. Maximum working pressure 10.0 bar. Cold water use only.
Marking:
Kemper on body.
Installation Requirements:
R001 R415 R570
Expiry date:
31/12/2027
Model:
KHS Flush Point range comprising of model codes: 6840001500, 6840101500, 6840401500 & 6840501500.
Product Images

Approval Holder:
Gebr. Kemper GmbH + Co. KG
Company Name
Gebr. Kemper GmbH + Co. KG
Address
Harkortstr. 5 57462 Olpe Germany
Phone
+49(0) 27618910
General Email
info@kemper-olpe.de

View All Listings by this Company

Print This Approval


#2212054

Range of single hole, single outlet pull out spray, combination tap assemblies (brass bodies, various finishes – see models) incorporating ceramic cartridge headworks with single lever operating members controlling the hot and cold and a quarter turn ceramic disk headwork with a dome type operating member controlling chilled water supply. The spout outlet incorporates a plastic aerator. The inlet from the tap to the pull-out spray hose incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 Bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Tap(s) incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed.
WRAS Approval Number:
2212054
Size:
Polyamide braided PEX lined flexible hose assemblies incorporating 3/8" BSP (F) captive nut end connections.
Marking:
Grohe on body
Installation Requirements:
R001 R009 R090
Expiry date:
31/12/2027
Model:
30601000 - Minta pull-out duo L-spout chrome, 30601DC0 - Minta pull-out duo L-spout supersteel, 30590000 - Minta pull-out duo L-spout chrome, 30590DC0 - Minta pull-out duo L-spout supersteel, 30590KF0 - Minta pull-out duo L-spout matt black. Models added June 2023: 416967045 - Minta pull-out duo L-spout chrome, 416967DC4 - Minta pull-out duo L-spout supersteel, 416967KF4 - Minta pull-out duo L-spout matt black.
Product Images

Approval Holder:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Country
Germany
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company

Print This Approval


#2212335

Range of single hole, single outlet (fixed) pillar tap with brass bodies (chrome plated), incorporating ceramic disc headwork and single lever operating member. Spout outlet incorporates a plastic aerator. Maximum working pressure 5- 10.0 bar (see models). Maximum operating temperature 60°C – 85°C (see models).

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2212335
Size:
½” BSF (F) Captive nut
Marking:
Lanbiao on body.
Installation Requirements:
R001 R006 R010 R160
Expiry date:
31/12/2027
Model:
F4182M (10bar,60°C), F4182MH (10bar,60°C), F4182 (5bar,60°C), F4182H (5bar,60°C), F4192 (10bar,60°C), F5112 (10bar,60°C), F5112M (10bar,60°C), F7112L (10bar,60°C), F7112MM (10bar,60°C), F7112M (5bar,60°C), F7112 (10bar,60°C), F7142 (10bar,60°C), F8142M (10bar,85°C), F8142 (10bar,85°C), F8142H (10bar,85°C), F9182 (5bar,60°C), F9182M (10bar,60°C), F4132M (10bar,60°C), F4132 (10bar,60°C), F4142M (10bar,60°C), F4142 (5bar,60°C), F8192 (5bar,60°C), F9142 (5bar,85°C), F9142M (5bar,85°C), F4002 (5bar,60°C), F8122L (5bar,85°C), F8122M (10bar,85°C), F8122 (5bar,85°C), F8132 (5bar,60°C), F8152B (5bar,60°C), F8152M (10bar,60°C), F9122M (10bar,85°C), F9122 (5bar,85°C), F9122H (5bar,85°C), F4002M (5bar,60°C), F8182B (10bar,65°C). Models added August 2023: F4182-GJS (5bar,60°C) F7112M-H (5bar,60°C) F8122-H (5bar,85°C) F8122M-H (10bar,85°C) F8152M-H (10bar,60°C) F8182B-H (10bar,65°C) Model added March 2024 F8142M-H (10bar,85C) Models added January 2025 F7112-H 10bar, 60C F4132-H 10bar 60C F4132M-H 10bar 60C F4142-H 5bar 60C F4142M-H 10bar 60C Where model has ‘H’ in model name, this means it is has a black finish.
Product Images

Approval Holder:
TAIZHOU LANBIAO SANITARY WARE CO., LTD
Company Name
TAIZHOU LANBIAO SANITARY WARE CO., LTD
Address
Xudou Villiage Qinggang Yuhuan Zhejiang
Postcode
317606
Country
China
Phone
18957382651
General Email
957989256@qq.com

View All Listings by this Company
Manufacturer:
TAIZHOU LANBIAO SANITARY WARE CO., LTD
Company Name
TAIZHOU LANBIAO SANITARY WARE CO., LTD
Address
Xudou Villiage Qinggang Yuhuan Zhejiang
Postcode
317606
Country
China
Phone
18957382651
General Email
957989256@qq.com

View All Listings by this Company

Print This Approval


#2301709

Single hole, single outlet (fixed) combination tap assemblies (chrome plated brass bodies), incorporating a ceramic cartridge headwork with single lever operating member. The spout outlets incorporate plastic flow straighteners or aerators. The products are supplied with approved click type wastes, verified by test. . Maximum working pressure - 5.0 Bar Maximum operating temperature 65.0°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2301709
Size:
Stainless Steel braided, EPDM lined flexible hoses with 1/2" BSP captive nut end connections.
Marking:
Aqualisa on operating member
Installation Requirements:
R001 R006 R010
Expiry date:
31/01/2028
Model:
CB.LPT.19 LARGE PILLAR COMBINATION TAP ASSEMBLY
Product Images

Approval Holder:
Aqualisa Products Ltd.
Company Name
Aqualisa Products Ltd.
Address
Unit 6 The Flyers Way, Westerham, Kent
Postcode
TN6 1DE
Phone
07920 790367
General Email
tracey.jones@aqualisa.co.uk

View All Listings by this Company

Print This Approval


#2212340

Range of single hole, single outlet (fixed) combination tap assemblies (chrome plated brass), T-638-series incorporates quarter turn ceramic disc headworks with single lever operating members T-638M series incorporates, non-rising spindle headworks with dome or cross-top operating members. The spout outlets incorporate a plastic flow straightener. The products are supplied with a lever operated pop-up waste. Maximum working pressure 10.0 bar. Max operating temperature 85°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2212340
Size:
15mm copper tails.
Marking:
T.K. on body.
Installation Requirements:
R001 R006 R010
Expiry date:
31/12/2027
Model:
T-638-H1. T-638-H2. T-638M-H1. T-638M-H2. T-638M-H3. T-638M-H4. T-638M-H5.
Product Images

Approval Holder:
Tsangkuo Industrial Co., Ltd.
Company Name
Tsangkuo Industrial Co., Ltd.
Address
No. 27, Lane 22, Chang Ting Road, Lukang Changhua
Country
Taiwan
Phone
886-4-7713991
General Email
engineer@brasstk.com

View All Listings by this Company
Manufacturer:
Tsangkuo Industrial Co., Ltd.
Company Name
Tsangkuo Industrial Co., Ltd.
Address
No. 27, Lane 22, Chang Ting Road, Lukang Changhua
Country
Taiwan
Phone
886-4-7713991
General Email
engineer@brasstk.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 517 of 1110

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.