Wall mounted shower head and arm (chromium plated brass) incorporating a NBR seal and TPE gasket. The inlet to the shower head from the shower arm incorporates a stainless-steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working temperature 60°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2201056

Note:

Open outlet use only.

Size:

½” BSP (M).

Marking:

Dornbracht on shower arm surround

Installation Requirements:

R001 R040

Expiry date:

31/01/2027

Model:

28505979

Product Images

Approval Holder:

Dornbracht GmbH & Co. KG.

Company Name

Dornbracht GmbH & Co. KG.

Address

Koebbingser Muehle 6 Iserlohn

Postcode

D-58640

Country

Germany

Phone

+49 2371 433 0

General Email

wpape@dornbracht.com

View All Listings by this Company

Manufacturer:

Dornbracht GmbH & Co. KG.

Company Name

Dornbracht GmbH & Co. KG.

Address

Koebbingser Muehle 6 Iserlohn

Postcode

D-58640

Country

Germany

Phone

+49 2371 433 0

General Email

wpape@dornbracht.com

View All Listings by this Company

Range of shower handsets and shower kits. Shower kits 2.1703.391, 2.1703.015 & 2.1703.016 incorporate a shower handset, shower hose and riser rail. Shower handset inlets incorporate a flow regulator. Maximum operating temperature 60°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2201338

Note:

Open outlet use only.

Size:

½” BSP (M)

Marking:

Mira shower on body

Installation Requirements:

R001 R040

Expiry date:

31/01/2027

Model:

1.1605.237 Mira Beat 110 Multi Mode Handset Chrome (Module No: 1740.065) 1.1605.238 Mira Beat 110 Multi Mode Handset White (Module No: 1740.066) 2.1703.009 Mira Beat 90 Single Mode White (Module No: 1703.452) 2.1703.011 Mira Beat 90 Single Mode Chrome (Module No: 1703.460) 2.1703.010 Mira Beat 90 Multi Mode White (Module No: 1703.251) 2.1703.012 Mira Beat 90 Multi Mode Chrome (Module No: 1703.250) 2.1703.015 Mira Beat 90 Fittings Kit White/Chrome 2.1703.016 Mira Beat 90 Fittings Kit Chrome 2.1703.391 Mira Beat 90 Bath Shower Fittings Kit (Chrome) 2.1831.003 Mira Beat 90 Eco Multi Mode Handset Chrome (Module No: 1831.001) Model added October 2023 39178W-CP Mira Beat 90 Single Mode Chrome Model added November 2023 (39187W) Mira Beat 90 Fittings Kit Chrome

Product Images

Approval Holder:

Kohler Mira Ltd.

Company Name

Kohler Mira Ltd.

Address

Cromwell Road Cheltenham Gloucestershire

Postcode

GL52 5EP

Country

United Kingdom

Phone

07425 645619

General Email

jon.barfield@mirashowers.com

View All Listings by this Company

Manufacturer:

Kohler Mira Ltd.

Company Name

Kohler Mira Ltd.

Address

Cromwell Road Cheltenham Gloucestershire

Postcode

GL52 5EP

Country

United Kingdom

Phone

07425 645619

General Email

jon.barfield@mirashowers.com

View All Listings by this Company

Range of shower outlets incorporating brass bodies (various finishes) and NBR ‘O’-rings. Maximum operating temperature 85°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2205701

Note:

Open outlet use only

Size:

⅜”, ½” and ¾” BSP (F) (all models)

Marking:

MBL on body

Installation Requirements:

R001 R040

Expiry date:

31/05/2027

Model:

Victorian Skirted shower rose: VS65, VS75, VS100, VS125, VS150, VS200, VS300 Victorian skirted easy clean rose: VSEC65, VSEC75, VSEC150, VSEC200, VSEC300 Modern Rose: M75, M150, M200, M300 Modern easy clean rose: MEC65, MEC75, MEC150, MEC200, MEC300 Modern slimline easy clean rose: 75SMEC, 300SMEC Victorian flat front rose: VFF150, VFF200 Slim easy clean rose: SEC200 Models available with a suffix to denote the finish, for example: P = Polished, C = Chroma, G = Gold, N = Nickel

Approval Holder:

Marston Brassware Ltd.

Company Name

Marston Brassware Ltd.

Address

Chancel Indus Est, Hickman Avenue, Wolverhampton.

Postcode

WV1 2UH

Country

United Kingdom

Phone

01902 352 425

General Email

info@marstonbrassware.com

View All Listings by this Company

Manufacturer:

Marston Brassware Ltd.

Company Name

Marston Brassware Ltd.

Address

Chancel Indus Est, Hickman Avenue, Wolverhampton.

Postcode

WV1 2UH

Country

United Kingdom

Phone

01902 352 425

General Email

info@marstonbrassware.com

View All Listings by this Company

‘Concept’ & ‘Advance’ ranges of atmospheric steaming ovens. The products incorporate a retractable triple layered hose on a reel and a push-button operated shower handset. The inlet of the shower handset incorporates a single check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection The water supply is controlled via a solenoid valve. The retractable hose has its own dedicated supply also controlled via a solenoid valve. The products are supplied with dual layer supply hoses (grey PVC outer layer/black PVC inner layer) with ¾” captive nut end connections, and chrome plated DZR brass ½” BSP (F) x ¾” BSP (M) double check valve assemblies (suitable for backflow protection against Fluid Category 3) for installation on each inlet. Maximum working pressure 4.0 bar. Cold supply only.

Section:

1690 Steaming Ovens

WRAS Approval Number:

2110369

Note:

Cleaning chemicals and detergents used in the automatic spray washing function must not represent a Fluid Category risk higher than Fluid Category 3. The Fluid Category of risk associated with the retractable hose and self-closing trigger supplied with this appliance can only be determine by the Water Regulations/Byelaws (Scotland) department of the local Water Supplier in the area of installation, which will require a site specific risk assessment. Under Regulation/Byelaw 3 and schedule 2 paragraph 15, the installer must ensure sufficient backflow protection is provided in line with the findings of the risk assessment. R008 applies to the solenoid inlet.

Size:

¾” BSP (M) (to solenoid)

Marking:

Fagor, Serial No., Model No., Ref No., manufacturing date (MM/YY) and other technical information on top panel. Fagor on front casing. Range name on front panel.

Installation Requirements:

R001 R008 R009 R160

Expiry date:

31/10/2026

Proviso:

Discharge to drain must be via a Type AA, AB or AD air gap or in accordance with EN 1717.

Model:

‘Concept’ & ‘Advance’ range: C-061-E-D, C-061-E-I, CW-061-E-D, CW-061-E-I, A-061-E-D, A-061-E-I, AW-061-E-D, AW-061-E-I, C-101-E-D, C-101-E-I, CW-101-E-I, CW-101-E-D, A-101-E-D, A-101-E-I, AW-101-E-D, AW-101-E-I, C-102-E-D, C-102-E-I, CW-102-E-D, CW-102-E-I, A-102-E-D, A-102-E-I, AW-102-E-D, AW-102-E-I, C-201-E, C-201-E-C, CW-201-E, CW-201-E-C, A-201-E, A-201-E-C, AW-201-E, AW-201-E-C, C-202-E, C-202-E-C, CW-202-E, CW-202-E-C, A-202-E, A-202-E-C, AW-202-E, AW-202-E-C, C-0623-E-D, CW-0623-E-D, A-0623-E-D, AW-0623-E-D, C-061-G-D, C-061-G-I, CW-061-G-D, CW-061-G-I, A-061-G-D, A-061-G-I, AW-061-G-D, AW-061-G-I, C-101-G-D, C-101-G-I, CW-101-G-D, CW-101-G-I, A-101-G-D, A-101-G-I, AW-101-G-D, AW-101-G-I, C-102-G-D, C-102-G-I, CW-102-G-D, CW-102-G-I, A-102-G-D, A-102-G-I, AW-102-G-D, AW-102-G-I, C-201-G, C-201-G-C, CW-201-G, CW-201-G-C, A-201-G, A-201-G-C, AW-201-G, AW-201-G-C, C-202-G, C-202-G-C, CW-202-G, CW-202-G-C, A-202-G, A-202-G-C, AW-202-G, AW-202-G-C, Where: C prefix = Concept models. A prefix = Advance models. E = Electric oven. G = Gas oven. W = Oven with automatic washing system. Numbers denote the capacity of the oven: 0623: 6 trays GN-2/3. 061: 6 trays GN-1/1 - 12 trays GN-1/2. 101: 10 trays GN-1/1 - 20 trays GN-1/2. 102: 10 trays GN-2/1 - 20 trays GN-1/1. 201: 20 trays GN-1/1 - 40 trays GN-1/2. 202: 20 trays GN-2/1 - 40 trays GN-1/1. I = Left door opening. R = Right door opening. C = Model with trolley.

Product Images

Approval Holder:

Fagor Industrial S Coop.

Company Name

Fagor Industrial S Coop.

Address

Barrio Sancholopetegui 22 20560 - Oñati

Country

Spain

Phone

+34 943 71 80 30

General Email

info@fagorindustrial.com

View All Listings by this Company

Manufacturer:

Fagor Industrial S Coop.

Company Name

Fagor Industrial S Coop.

Address

Barrio Sancholopetegui 22 20560 - Oñati

Country

Spain

Phone

+34 943 71 80 30

General Email

info@fagorindustrial.com

View All Listings by this Company

Range of in-line `Y`-patterned strainers with bronze bodies incorporating stainless steel mesh strainers and PTFE washers. Maximum working pressure 20.0 bar. Maximum operating temperature 85°C.

Section:

1715 Strainers

Size:

1/2”, 3/4”, 1”, 1-1/4”, 1-1/2” & 2” BSP (F)

Marking:

HAVELIT, size, PN & Model on data plate on body Flow arrow, size & PN on body

Installation Requirements:

R001

Expiry date:

31/08/2025

Model:

HL-Y575 `Y`-PATTERNED STRAINERS

Product Images

Approval Holder:

HAVELIT VALVES SRL

Company Name

HAVELIT VALVES SRL

Address

VIA FRANCESCO SCACCI 4, ROMA

Country

Italy

View All Listings by this Company