Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #240455061

'Sikadur® ADH2200 (formerly known MasterBrace® ADH2200)'. Site applied, grey coloured (once applied), two component Epoxy bedding and mortar. Mix parts A and B in a weight ratio of 60:40 and apply as per manufacturer's Product Data Sheet 'MBS_CC-UAE/Br_2200_12_94/v4/07_19/v5/05_20/v6/01_24/v7/03_24'. Cure for 21 days@25°C. For use with water up to 40°C. This material is only approved for the mixing & curing conditions that appear on the approval. If the mix and/or cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:: 5042 Coatings, Paints & Linings
Section Subtitle:: Site applied pipe and fittings coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.
WRAS Approval Number:: 240455061
Expiry date:: 30/04/2029

Approval Holder:: SIKA UAE LLC/Sika MB Construction Chemicals L.L.C

Company Name
SIKA UAE LLC/Sika MB Construction Chemicals L.L.C
Address
Head Office: P.O. Box 37127, Dubai Investment Park, Phase 1 Expo Road, Dubai
Country
United Arab Emirates

View All Listings by this Company

WRAS Approval Number: #2205580

‘D-TECH DTCAPOL-300’. Site applied, grey coloured chemical anchor resin which is supplied in a pre-mixed cartridge. Apply as per manufacturer’s instructions dated 29.01.2021. Cure for 4 days@7°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:: 5311 Resin Anchors
Expiry date:: 31/05/2027

Approval Holder:: Vermont Sales Pty., Ltd.

Company Name
Vermont Sales Pty., Ltd.
Address
192 Tsessebe Cresent, Corporate Park South, Old Pretoria Road, Midrand
Country
South Africa

View All Listings by this Company

WRAS Approval Number: #240655015

'AquaFlex T 5821'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 65°C.

Section:: 5365 Rubbers
Section Subtitle:: Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:: 240655015
Expiry date:: 30/06/2029

Approval Holder:: Compounds AG

Company Name
Compounds AG
Address
Barzloostrasse 1, 8330 Pfaffiken ZH, Switzerland
Phone
+41 44 953 34 36
General Email
info@compounds.ch

View All Listings by this Company

WRAS Approval Number: #240655040

'Weld-on 721 ECO blue PVC Cement'. Blue coloured solvent cement. Apply as per manufacturer's product data sheet and cure for 12 hours@5°C. For use with water up to 40°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:: 5560 Solvent Cements
Expiry date:: 30/06/2029

Approval Holder:: IPS Corporation

Company Name
IPS Corporation
Address
445 W. Victoria Street, Compton, California 90220
Country
USA
Phone
(310) 898-3300
General Email
info@ipscorp.com

View All Listings by this Company

WRAS Approval Number: #240702022

Range of push fit stop valves with white plastic bodies. Maximum working pressure/temperature: 10bar @ 20°C and 4 bar @ 60°C.

Section:: 2336 Valves
Section Subtitle:: Stop - plastic.
WRAS Approval Number:: 240702022
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Note:: For use with John Guest LLDPE Tubing which is not considered part of this approval. Pipes inserts must be used for the following LLDPE Tube sizes: 3/8” and 10mm and 12mm.
Size:: See models below
Marking:: John Guest logo (brand of Reliance Worldwide Corporation (UK) Ltd.) on operating member and body, Size and PPMF on collet
Installation Requirements:: R001 R008
Expiry date:: 31/07/2029
Model:: Speedfit x Speedfit: PPSV040808W: 1/4" - 1/4" Speedfit Shut Off Valve PPSV041212W: 3/8" - 3/8" Speedfit Shut Off Valve PPMSV040606W: 6mm - 6mm Speedfit Shut off Valve PPMSV040808W: 8mm - 8mm Speedfit Shut Off Valve PPMSV041010W: 10mm - 10mm Speedfit Shut off Valve PPMSV041212W: 12mm - 12mm Speedfit Shut Off Valve Speedfit x Male (NPTF Thread): PPSV010822W: 1/4" Speedfit x 1/4" nptf Shut Off Valve PPSV010822W-R: 1/4" Speedfit x 1/4" nptf Shut Off Valve PPSV011223W: 3/8" Speedfit x 3/8" nptf Shut Off Valve Speedfit x Female (NPTF Thread): PPSV451223W: 3/8" x 3/8" nptf Female Shut Off Valve Speedfit x Female (NPTF Thread): PPSV500822W: 1/4" Speedfit x 1/4" nptf Female Elbow Shut Off Valve PPSV501222W: 3/8" Speedfit x 1/4" nptf Female Elbow Shut Off Valve PPSV501222W-Y: 3/8" Speedfit x 1/4" nptf Female Elbow Shut Off Valve

Approval Holder:: Reliance Worldwide Corporation (UK) Ltd

Company Name
Reliance Worldwide Corporation (UK) Ltd
Address
Horton Road, West Drayton
Postcode
UB7 8JL
Country
United Kingdom
Phone
+44 7730 052060
General Email
PETER.LANCASTER@RWC.COM

View All Listings by this Company
Manufacturer:: Reliance Worldwide Corporation (UK) Ltd

Company Name
Reliance Worldwide Corporation (UK) Ltd
Address
Horton Road, West Drayton
Postcode
UB7 8JL
Country
United Kingdom
Phone
+44 7730 052060
General Email
PETER.LANCASTER@RWC.COM

View All Listings by this Company