‘Xpress’ range of press fit fittings with copper or brass bodies and EPDM ‘O’-rings. For use with copper tube manufactured to EN1057. For above ground ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 100°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2201304

Size:

see model

Marking:

Brass fittings: Xpress and size on body. Copper fittings: Xpress, size and Kitemark logo on body.

Installation Requirements:

R001

Expiry date:

31/01/2027

Model:

Code Sl/7270 Sl/72705 SlR/7240 56/7243 S12/7002A S12S/7001A S2/6270G S3/6243G S7/6246G S8/6280G Description Straight coupling Straight coupling slip pattern Straight reducing coupling Reducer Elbow Street elbow Straight female connector Straight male connector Female adaptor Male Adaptor Sizes 15mm -108mm 15mm -108mm 15mm -108mm 15mm -108mm 15mm -108mm 15mm -108mm 15mm -64mm 15mm -108mm 15mm -54mm 15mm-42mm Copper/ Copper Copper Copper Copper Copper Copper Gunmetal Gunmetal Gunmetal Gunmetal S11/6330 S13/6092G S14/6090G Union coupling Male elbow Female elbow 15mm -54mm 15mm -54mm 15mm -54mm Gunmetal Gunmetal Gunmetal S15/6472G Backplate elbow 15mm - 22mm Gunmetal SlFMF/7510 Composite female metric flange 67mm -108mm Copper SlFMM/7520 Composite female metric flange 67mm -108mm Copper S12R/7002A S15L/6472L Reducing Elbow Elbow 22mm x 15mm ½” and 3/4" Copper Gunmetal 519/7005 Bend 15mm-28mm Copper 521/7041 Obtuse Elbow 12mm-108mm Copper 5215/7040 Obtuse Street Elbow 12mm-108mm Copper 522/7086 Partial Crossover 15, 18 and 22mm Copper 5225/7087 Crossover 15, 18 and 22mm Copper 523/7085 Full Crossover 15, 18 and 22mm Copper 524/7130 Equal Tee 12mm-108mm Copper 525/7130 Tee Reducer Branch 15mm-108mm Copper 526/7130 Tee One End Reducer 15mm-35mm Copper 526/7130 Tee One End And Branch Reducer 15mm-54mm Copper 528/7130 S30/130G 560/7301 Tee Both Ends Reducer Female Branch Tee Stop End 12mm-28mm 12mm-108mm 35mm-54mm Copper Gunmetal Copper 561/7301 Stop End 12mm-108mm Copper S65F/6096G Elbow 12mm-54mm Gunmetal S68FF/6359 S69/6331G S69F/6330G Union Straight Male Union Connector Straight Female Union Connector 15mm-54mm 12mm-54mm 12mm-54mm Gunmetal Gunmetal Gunmetal

Product Images

Approval Holder:

Aalberts Integrated Piping Systems Ltd.

Company Name

Aalberts Integrated Piping Systems Ltd.

Address

St. Catherines Avenue Doncaster South Yorkshire

Postcode

DN4 8DF

Country

United Kingdom

Phone

+447843075405

General Email

gavin.peters@aalberts-ips.com

View All Listings by this Company

‘Endex’ range of copper alloy and copper end feed fittings for use with copper pipe. For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2202701

Marking:

Endex (brand of Pegler Yorkshire Ltd.) and size on body

Installation Requirements:

R001

Expiry date:

28/02/2027

Model:

Endex range consisting of: N1 STRAIGHT COUPLING: 6mm to 54mm N1IM ADAPTOR COUPLING: 15mm x ½” to 28mm x 1” N1R REDUCING COUPLING: 8mm x 6mm to 54mm x 42mm N1SLIP STRAIGHT COUPLING SLIP: 15mm to 54mm N2 STRAIGHT FEMALE CONNECTOR: 15mm x 3/8" to 54mm x 2” N3 STRAIGHT MALE CONNECTOR: 15mm x 3/8" to 54mm x 2” N6 REDUCER: 8mm x 6mm to 54mm x 42mm N7 FEMALE ADAPTOR: 15mm x ½” to 54mm x 2” N8 MALE ADAPTOR: 15mm x ½” to 54mm x 2” N9 ADAPTOR: ½” x 15mm to ¾” x 22mm N11 UNION COUPLING CONE FACE: 15mm to 54mm N12 ELBOW: 8mm to 54mm N12R REDUCING ELBOW: 22mm x 15mm N12S STREET ELBOW: 10mm to 54mm N13 MALE ELBOW: 15mm x 1/2” to 28mm x 1” N14 FEMALE ELBOW: 15mm x ½” to 35mm x 1.1/4” N15 BACKPLATE ELBOW: 15mm x ½” to 22mm x ¾” N18 SLOW BEND: 10mm to 54mm N18S SLOW STREET BEND: 10mm to 54mm N21 OBTUSE ELBOW 45°: 12mm to 54mm N21S OBTUSE STREET ELBOW 45°: 15mm to 54mm N22 PARTIAL CROSSOVER: 15mm to 22mm N23 FULL CROSSOVER: 15mm to 22mm N24 EQUAL TEE: 6mm to 54mm N25 TEE REDUCED BRANCH: 15mm x 15mm x 10mm to 54mm x 54mm x 42mm N26 TEE ONE END REDUCED: 18mm x 15mm x 18mm to 54mm x 42mm x 54mm N27 TEE ONE END AND BRANCH REDUCED: 15mm x 12mm x 12mm to 54mm x 42mm x 42mm N28 TEE BOTH ENDS REDUCED: 10mm x 10mm x 12mm to 35mm x 35mm x 42mm N29 FEMALE TEE: 15mm x ½” x 15mm N29R FEMALE TEE: 22mm x ½” x 22mm to 28mm x ½” x 28mm N30 FEMALE TEE: 15mm x 15mm x ½” to 28mm x 28mm x 1” N30R FEMALE TEE: 22mm x 22mm x ½” to 35mm x 35mm x ½” N50 CROSS: 15mm to 22mm N61: 8mm to 54mm N61AV STOP END: 15mm N62 STRAIGHT TAP CONNECTOR: 15mm x ½” to 22mm x ¾” N63 BENT TAP CONNECTOR: 15mm x ½” to 22mm x ¾” N64 BENT UNION ADAPTOR: 15mm x ¾” N65 BENT MALE UNION CONNECTOR: 15mm x ½” to 28mm x 1” N68 STRAIGHT UNION ADAPTOR: 15mm x ¾” to 28mm x 1¼” N68FF FLAT FACED UNION ADAPTOR: 22mm x ¾” N68 METER UNION: 22mm x ¾” N69 STRAIGHT MALE UNION CONNECTOR: 15mm x ½” to 54mm x 2”

Approval Holder:

Aalberts Integrated Piping Systems Ltd.

Company Name

Aalberts Integrated Piping Systems Ltd.

Address

St. Catherines Avenue Doncaster South Yorkshire

Postcode

DN4 8DF

Country

United Kingdom

Phone

+447843075405

General Email

gavin.peters@aalberts-ips.com

View All Listings by this Company

Low profile mechanical seal intended for the internal repair of pipe joints. The system incorporates two stainless steel compression rings and an EPDM seal. For above and below ground use. Maximum working pressure 22.5 bar. Cold water use only.

Section:

1220 Fittings for use with Tube and Pipe

Section Subtitle:

Flanged, un-flanged and repair clamps. (external clamps only) Unless specified in the individual approval, the products within this section are not suitable for below ground use WRAS takes no responsibility for the claims made by the manufacturer regarding the effectiveness of the product for providing a repair to fittings to prevent a waste of water.

WRAS Approval Number:

2111030

Size:

DN600

Marking:

Amex-10 printed on inside of seal and clamp.

Installation Requirements:

R001

Expiry date:

30/11/2026

Model:

AMEX-10 SEAL

Product Images

Approval Holder:

Planned Maintenance (Pennine) Ltd

Company Name

Planned Maintenance (Pennine) Ltd

Address

Bentley Wood Way Burnley

Postcode

BB11 5ST

View All Listings by this Company

OMEG range of wall mounted, near-boiling water dispensers (cased and insulated). The products incorporate a solenoid valve which controls the flow, a stainless-steel tank, 3 or 5L (see model), and a plastic strainer at the inlet. Maximum supply pressure 10.0 bar. Cold water supply only. Maximum operating temperature 95˚C

Section:

1380 Heaters

Section Subtitle:

Electric, thermal storage, mains fed, closed outlet. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within with system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.

WRAS Approval Number:

2111024

Size:

¾” BSP (M) inlet.

Marking:

HYCO on front of unit. HYCO & OMEG on technical label.

Installation Requirements:

R001 R040

Expiry date:

30/11/2026

Model:

OMEG3 and OMEG5

Product Images

Approval Holder:

Hyco Manufacturing Ltd

Company Name

Hyco Manufacturing Ltd

Address

California Drive, Castleford, West Yorkshire

Postcode

WF10 5QH

View All Listings by this Company

Range of under-sink, electrically heated vented water heaters (cased and insulated). Maximum operating temperature 98˚C

Section:

1390 Heaters

Section Subtitle:

Electric, thermal storage, mains fed, open outlet.

WRAS Approval Number:

2111377

Size:

3/8” BSP

Marking:

CLEARWATER on front of heater Model and other tech info on adhesive label on body

Installation Requirements:

R001

Expiry date:

30/11/2026

Model:

2.4L,1500KW： CWT124T CWT024T CWT023T 4L,2300KW： CWT140T

Product Images

Approval Holder:

Clearwater Products Ltd

Company Name

Clearwater Products Ltd

Address

Unit 5603 Shannon Place Tewkesbury Place

Postcode

GL20 8SL

View All Listings by this Company