Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #2201055

‘Tornado’ & ‘Ninjo’ ranges of freestanding and undercounter bedpan washers with flow controlled via a solenoid and discharged via type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). Maximum working pressure 8.0 bar. Maximum operating temperature 60°C

Section:: 2360 Washing Machines
Section Subtitle:: Bedpan and disinfecting. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.
WRAS Approval Number:: 2201055
Note:: Discharge to drain must be via a type AA, AB or AD air gap or in accordance with EN1717.
Size:: Stainless steel braided PEX lined flexible hose assembly incorporating a ½" captive nut end connection.
Marking:: Arjo on door. Model range on control panel.
Installation Requirements:: R001
Expiry date:: 31/01/2027
Model:: NINJO range: FD1600 & FD1610 (Free standing) FD1615 (Under counter) TORNADO range: FD1800 & FD1810 (Free standing) FD1805 (Under counter)

Product Images

Approval Holder:: Arjo Huntleigh AB

Company Name
Arjo Huntleigh AB
Address
Hans Michelsensgatan 10 211 20 Malmo

View All Listings by this Company
Manufacturer:: Arjo Huntleigh AB

Company Name
Arjo Huntleigh AB
Address
Hans Michelsensgatan 10 211 20 Malmo

View All Listings by this Company

WRAS Approval Number: #2201070

Range of commercial front loading washing machines with flow controlled by solenoid valve and discharged via a type AD air gap arrangement (verified by test - suitable for backflow protection against fluid category 5). The product is supplied with a single check valve assembly (suitable for backflow protection against Fluid Category 2) and PEX lined rubber inlet connections hoses. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:: 2370 Washing Machines
Section Subtitle:: Clothes. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.
WRAS Approval Number:: 2201070
Size:: ¾” BSP captive nut (to inlet hoses)
Marking:: Alliance CE & company details, model and other information on adhesive label on body
Installation Requirements:: R001
Expiry date:: 31/01/2027
Model:: WM75***** C & WM85***** C RANGE OF WASHING MACHINES

Approval Holder:: Alliance Laundry CE s.r.o

Company Name
Alliance Laundry CE s.r.o
Address
Místecká 1116, 742 58 Príbor
Country
Czech Republic
Phone
+420 556 768 885

View All Listings by this Company

WRAS Approval Number: #2201082

Section:: 2370 Washing Machines
Section Subtitle:: Clothes. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.
WRAS Approval Number:: 2201082
Size:: ¾” BSP captive nut (to inlet hoses)
Marking:: GIRBAU on soap draw.
Installation Requirements:: R001
Expiry date:: 31/01/2027
Model:: WM75.C & WM85.C

Product Images

Approval Holder:: Girbau S.A.

Company Name
Girbau S.A.
Address
Carretera de Manlleu, KM 1, Vic
Postcode
08500
Country
Spain
Phone
+34659242864
General Email
jsana@girbau.com

View All Listings by this Company

WRAS Approval Number: #2203319

Range of undercounter and passthrough commerical dishwashers with flow controlled by a solenoid valve and discharged via a type AB air gap (verified by test - suitable for backflow protection against fluid category 5). The inlet hose incorporates a stainless steel strainer. Maximum working pressure 4.0 bar. Maximum operating temperature 55°C.

Section:: 2390 Washing Machines
Section Subtitle:: Dish. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.
WRAS Approval Number:: 2203319
Size:: ¾” BSP (F) Captive nut
Marking:: Sammic SL, manufacturers address, model, serial number, date of manufacture (MM/YYYY) and other technical information on Adhesive label on right panel.
Installation Requirements:: R001 R009 R574
Expiry date:: 31/03/2027
Model:: Undercounter: AX-51 BC AX-51 BCD UX-50 C UX-50 SC UX-50 BC UX-50 SBC UX-50 BCD UX-50 SBCD Passthrough: AX-100 BC AX-100 BCD UX-120 C UX-120 SC UX-120 BC UX-120 SBC UX-120 BCD UX-120 SBCD Models added April 2025; Passthrough: UX-130 C UX-130 SC UX-130 BC UX-130 SBC UX-130 BCD UX-130 SBCD UX-150 C UX-150 SC UX-150 BC UX-150 SBC UX-150 BCD UX-150 SBCD Utensil: UX-600 C UX-600 BC UX-750 C UX-750 BC UX-1300 C UX-1300 BC

Product Images

Approval Holder:: Sammic S.L.

Company Name
Sammic S.L.
Address
C/Basarte 1 20720 Azkoitia (Gipuzkoa) Spain
Phone
Tel: +94 315 7234 Fax: +94 381 2883

View All Listings by this Company

WRAS Approval Number: #2110014

`Hy-MAG` range of electromagnetic water conditioners with blue PTFE coated bodies. Maximum working pressure 16.0 bar. Maximum operating temperature 65°C.

Section:: 2410 Water conditioners, de-scalers, phosphate dosing, magnetic, electrolytic and electronic
Size:: See model.
Marking:: HY-MAG on body. HY-MAG, temperature, pressure, model, serial number and other technical information on adhesive label on body.
Installation Requirements:: R001 R120 R150 R170
Expiry date:: 31/10/2026
Model:: HY-MAG DN15: ½” BSP (F). HY-MAG DN20: ¾” BSP (F). HY-MAG DN25: 1” BSP (F). HY-MAG DN32: 1 ¼” BSP (F). HY-MAG DN40: 1 ½” BSP (F). HY-MAG DN50: 2” BSP (F). HY-MAG DN65: 2 ½” BSP (F). HY-MAG DN100: 100mm flanged.

Product Images

Approval Holder:: Hydrotec International Water Treatment Limited

Company Name
Hydrotec International Water Treatment Limited
Address
38 Main Street Swords Country Dublin
Country
Ireland

View All Listings by this Company