Directory Search Results

Print List

#250402027

Range of wall mounted, exposed or concealed thermostatic shower valves (chrome plated brass) bodies incorporating a quarter turn ceramic disc headworks with various operating members. Temperature is controlled independently via a thermostatic cartridge also using various operating members incorporating a manual override button. The products incorporate approved check valve cartridges; however, the complete products have not been fully tested to demonstrate they provide backflow protection. Maximum working pressure 10.0 Bar Maximum operating temperature 65.0°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
250402027
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
Products are not supplied with shower hose, handset or riser rail assemblies
Size:
SEE MODELS
Marking:
XU SHENG on body or Wall cover.
Installation Requirements:
R001 R010 R040
Expiry date:
30/04/2030
Model:
Exposed XB-LY-036 – 15mm compression fittings XB-LY-036C – 15mm compression fittings XB-TYN-009 - 1/2" BSP M x 3/4" BSP M union offset. XB-TYN-009A - 1/2" BSP M XB-LY-022 - 1/2" BSP M XB-LY-022-A - 1/2" BSP M x 3/4" BSP M union offset. Concealed XB-AZ-038A – ½” BSP F XB-AZ-038A-01 – ½” BSP F XB-AZ-038A-02 – ½” BSP F XB-AZ-038A-03 – ½” BSP F XB-AZ-038A-04 – ½” BSP F 1. XB-AZ-038A,XB-AZ-038A-01,XB-AZ-038A-02,XB-AZ-038A-03,XB-AZ-038A-04 are different in handles. 2. XB-LY-036 is only upon outlet, but XB-LY-036C is upon and down outlet. 3. XB-TYN-009 is different with XB-TYN-009A in inlet fittings. 4. XB-LY-022 is different with XB-TYN-009A in inlet fittings. 5. XB-LY-036 and XB-LY-036C are only for us with copper pipe manufactured to BS EN 1057

Approval Holder:
Taizhou Xusheng Sanitary Ware Co. Ltd
Company Name
Taizhou Xusheng Sanitary Ware Co. Ltd
Address
No. 1, Lane 318, Binxiang Road, Sanjia Street, Taizhou City,Zhejiang Province,China Taizhou Bay New District, Taizhou City, Zhejiang Province,China

View All Listings by this Company

Print This Approval


#250402031

Range of wall mounted, concealed, thermostatic shower valves with (brass bodies – various trim set finishes. Incorporating a quarter turn ceramic disc headwork which controls the flow using dome type operating member. Temperature is controlled independently via a thermostatic cartridge also using a dome type operating member incorporating a manual override button. Both inlets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 Bar Maximum operating temperature 85.0°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
250402031
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
To be used with rough set 15896180 which has 1/2" BSP (F) inlets
Marking:
Hansgrohe logo on face plate, Hansgrohe logo on valve body.
Installation Requirements:
R001 R040
Expiry date:
30/04/2030
Model:
15896180 15872000 15872670 15874000 15874670 15838000 15838670 15847000 15847670

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#250402035

Range of wall mounted thermostatic shower valves, (brass bodies - various finishes) incorporating a two-way manual diverter headwork controlling the flow to either an overhead shower or shower handset. The temperature is controlled via a thermostatic cartridge incorporating a manual override button. The inlets on the shower valve and shower handset incorporate approved single check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
250402035
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
This product is supplied with a shower hose, handset and overhead shower.
Size:
3/4'' BSP (m) x 1/2'' BSP (m) offset union
Marking:
Hansgrohe on valve body, Hansgrohe on overhead shower face
Installation Requirements:
R001 R010 R040
Expiry date:
30/04/2030
Model:
27 267 xx0 27 268 xx0 27 271 xx0 27 281 xx0 Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish

Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718

View All Listings by this Company

Print This Approval


#250402037

Range of wall mounted, concealed, thermostatic shower valves with (brass bodies - chrome plated trim sets). Flow is either controlled by a ceramic disc headwork or 3-way manual diverter. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member and a manual override button. The inlets incorporate approved check valve cartridges however, the complete product has not been fully tested to demonstrate it provide backflow protection. Maximum working pressure; 10Bar Maximum operating temperature; 60°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
250402037
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
see models
Marking:
Dornbracht logo on faceplate
Installation Requirements:
R001 R010 R040
Expiry date:
30/04/2030
Model:
Two outlets 3542497090 – 1/2" (F) inlet/outlet 3542597090 – 1/2" (F) inlet/outlet 3542697090 – 1/2" (F) inlet/outlet Three outlets 3542797090 – 1/2" (F) inlet/outlet 3542897090 – 1/2" (F) inlet/outlet 3542997090 – 1/2" (F) inlet/outlet Trim Sets 36425670 36425710 36425809 36425831 36425832 36425845 36425892 36425970 36425977 36426670 36426710 36426809 36426831 36426832 36426845 36426892 36426970 36426977 36427670 36427710 36427809 36427845 36427892 36427970 36427977 36425xxx - with “one function volume control” 36426xxx - with “two function volume control / diverter” 36427xxx - with “three function volume control / diverter” Models added May 2025: 36427831 & 36427832.

Approval Holder:
Dornbracht AG & Co. KG
Company Name
Dornbracht AG & Co. KG
Address
Koebbingser Muehle 6 Iserlohn
Postcode
D-58640
Country
Germany
Phone
+49 2371 433 0

View All Listings by this Company

Print This Approval


#250404015

Range of wall mounted thermostatic bar shower mixers (brass bodies – various finishes) incorporating either a quarter turn ceramic disc headwork or two-way ceramic disc diverter with a dome or cubed type operating member. The temperature is controlled independently via a thermostatic cartridge with dome or cubed type operating members that incorporate a manual override button. The inlets incorporate approved single check valve cartridges, however, the complete assembly has not been fully tested to demonstrate that it provides backflow protection. Models ( ET 106, HT 106 & CV 106) are supplied with shower hose, handset, overhead shower and riser rail assembly. Maximum working pressure 5.0 bar. Maximum operating temperature 70°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
250404015
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
¾” x ½” BSP (M) offset union
Marking:
St James on body.
Installation Requirements:
R001 R010 R040
Expiry date:
30/04/2030
Model:
ET.105.XX 1 Outlet Thermostatic Shower Valve HT.105.XX 1 Outlet Thermostatic Shower Valve ET.106.XX 2 Outlet Thermostatic Shower Valve HT.106.XX 2 Outlet Thermostatic Shower Valve CV.105.XX 1 Outlet Thermostatic Shower Valve CV.106.XX 2 Outlet Thermostatic Shower Valve ET / HT / CV are the range, 10X is the range model type, .XX at the end denotes the finish Finish codes are - 01 = Chrome, 02 = Matt Black, 03 = Brushed Brass, 04 = Brushed Nickel, 05 = Brushed Bronze, 06 = Gunmetal, 07 = Polished Nickel, 08 = Stainless Steel

Approval Holder:
Marflow Engineering Ltd
Company Name
Marflow Engineering Ltd
Address
Britannia House Austin Way Birmingham
Postcode
B42 1DU
Country
United Kingdom
Phone
01213588946
General Email
wayne.berrow@marflow.co.uk

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 51 of 55

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.