Range of vertical cased and insulated direct and indirect unvented stainless steel hot water storage cylinders. Fitted with a Caleffi 309463 GLD temperature and pressure relief valve sat at 6 bar & 90°C, and supplied with an inlet control group consisting of in-line pressure reducing valve (Caleffi set at 3 bar) and pressure relief valve (Caleffi CWIC200055) set at 4.5 bar, and incorporates a stainless-steel mesh and an approved check valve cartridge (verified by test suitable for backflow protection against Fluid Category 2), expansion vessel and filling loop. Maximum working pressure 4.4 bar. Maximum operating temperature 99°C.

Section:

1890 Unvented Heating Apparatus

Size:

28mm compression.

Marking:

Ideal Heating, Manufacturers name, address, date of manufacturer, capacity, model no, serial no, pressure and technical information on adhesive label on body.

Installation Requirements:

R001 R140 R360 R511 R530

Expiry date:

31/05/2028

Model:

IDEPLUHP150DUOPPSZSL & IDEPLUHP180DUOPPSZSL. 475mm diameter 150, 180, litre; single coil cylinders on top of a buffer cylinder for coupling with a range of heat pumps 5kW to 14kW; Pre-plumbed and pre-wired; single zone

Approval Holder:

Ideal Boilers Ltd

Company Name

Ideal Boilers Ltd

Address

PO Box 103 National Avenue Hull East Yorkshire

Postcode

HU5 4JN

Country

United Kingdom

Phone

07775659359

General Email

ben.higinbotham@groupe-atlantic.co.uk

View All Listings by this Company

CAIO ranges of Indirect stainless steel insulated hot water storage cylinders with external expansion and copper pipework and fittings. The DHW circuit consists of a temperature and pressure relief valve set at 7.0 bar and 90°C, an inlet control group consisting of a pressure reducing valve adjustable between 2.7 and 3.3 bar, an expansion relief valve (SRV) set at 6.0 bar, a strainer and a check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2) also supplied with a tundish. Maximum supply pressure to the inlet control group 10.0 bar. Maximum working pressures - Primary circuit 6.0 bar, Secondary circuit 5.5 bar. Maximum operating temperature 65˚C.

Section:

1890 Unvented Heating Apparatus

WRAS Approval Number:

2103044

Note:

Expansion vessels should be installed in the vertical orientation and located so that the length of the connecting pipework is kept to a minimum.

Size:

22mm compression (Inlet Manifold)

Marking:

EHC logo and 'All in One' on front casing, company & technical information on adhesive label on body.

Installation Requirements:

R001 R140 R360

Expiry date:

31/03/2026

Model:

CAIO8/15OIND-B (8KW COMPACT AIO/150L INDIRECT CYLINDER BASIC PACKAGE) CAIO10/150IND-B (10KW COMPACT AIO/150L INDIRECT CYLINDER BASIC PACKAGE) CAIO12/150IND-B (12KW COMPACT AIO/150L INDIRECT CYLINDER BASIC PACKAGE) CAIO15/150IND-B (15KW COMPACT AIO/150L INDIRECT CYLINDER BASIC PACKAGE) CAIO8/150IND-U (8KW COMPACT AIO/150L INDIRECT CYLINDER PREPLUMBED & WIRED ULTIMATE PACKAGE) CAIO10/150IND-U (10KW COMPACT AIO/150L INDIRECT CYLINDER PREPLUMBED & WIRED ULTIMATE PACKAGE) CAIO12/15OIND-U (12KW COMPACT AIO/150L INDIRECT CYLINDER PREPLUMBED & WIRED ULTIMATE PACKAGE) CAIO15/150IND-U (15KW COMPACT AIO/150L INDIRECT CYLINDER PREPLUMBED & WIRED ULTIMATE PACKAGE) CAIO-150IND (COMPACT AIO 150L INDIRECT EXTERNAL EXPANSION VESSEL UNVENTED) CAIO10/170IND-B (10KW COMPACT AIO/170L INDIRECT CYLINDER BASIC PACKAGE) CAIO12/170IND-B (12KW COMPACT AIO/170L INDIRECT CYLINDER BASIC PACKAGE) CAIO15/170IND-B (15KW COMPACT AIO/170L INDIRECT CYLINDER BASIC PACKAGE) CAIO10/170IND-U (10KW COMPACT AIO/170L INDIRECT CYLINDER PREPLUMBED & WIRED ULTIMATE PACKAGE) CAIO12/170IND-U (12KW COMPACT AIO/170L INDIRECT CYLINDER PREPLUMBED & WIRED ULTIMATE PACKAGE) CAIO15/170-U (15KW COMPACT AIO/170L INDIRECT CYLINDER PREPLUMBED & WIRED ULTIMATE PACKAGE) CAIO-170IND (COMPACT AIO 170L INDIRECT EXTERNAL EXPANSION VESSEL UNVENTED) CAIO10/200IND-B (10KW COMPACT AIO/200L INDIRECT CYLINDER BASIC PACKAGE) CAIO12/200IND-B (12KW COMPACT AIO/200L INDIRECT CYLINDER BASIC PACKAGE) CAIO15/200LIND-B (15KW COMPACT AIO/200L INDIRECT CYLINDER BASIC PACKAGE) CAIO10/200IND-U (10KW COMPACT AIO/2OOL INDIRECT CYLINDER PREPLUMBED & WIRED ULTIMATE PACKAGE) CAIO12/200IND-U (12KW COMPACT AIO/200L INDIRECT CYLINDER PREPLUMBED & WIRED ULTIMATE PACKAGE) CAIO15/200IND-U (15KW COMPACT AIO/200L INDIRECT CYLINDER PREPLUMBED & WIRED ULTIMATE PACKAGE) CAIO-200IND (COMPACT AIO 200L INDIRECT EXTERNAL EXPANSION VESSEL UNVENTED) CAIO12/250IND-B (12KW COMPACT AIO/250L INDIRECT CYLINDER BASIC PACKAGE) CAIO15/250IND-B (15KW COMPACT AIO/250L INDIRECT CYLINDER BASIC PACKAGE) CAIO12/250IND-U (12KW COMPACT AIO/250L INDIRECT CYLINDER PREPLUMBED & WIRED ULTIMATE PACKAGE) CAIO15/250IND-U (15KW COMPACT AIO/250L INDIRECT CYLINDER PREPLUMBED & WIRED ULTIMATE PACKAGE) CAIO-250IND (COMPACT AIO 250L INDIRECT EXTERNAL EXPANSION VESSEL UNVENTED) CAIO12/300IND-B (12KW COMPACT AIO/300L INDIRECT CYLINDER BASIC PACKAGE) CAIO15/300IND-B (15KW COMPACT AIO/300L INDIRECT CYLINDER BASIC PACKAGE) CAIO12/300IND-U (12KW COMPACT AIO/300L INDIRECT CYLINDER PREPLUMBED & WIRED ULTIMATE PACKAGE) CAIO15/300IND-U (15KW COMPACT AIO/300L INDIRECT CYLINDER PREPLUMBED & WIRED ULTIMATE PACKAGE) CAIO-300IND (COMPACT AIO 300L INDIRECT EXTERNAL EXPANSION VESSEL UNVENTED)

Approval Holder:

THE ELECTRIC HEATING COMPANY LTD

Company Name

THE ELECTRIC HEATING COMPANY LTD

Address

Block 5, Unit 40 Third Road Blantyre Ind Est GLASGOW

Postcode

G72 0UP

Country

United Kingdom

Phone

07986970466

General Email

chris@electric-heatingcompany.co.uk

View All Listings by this Company