Directory Search Results

Print List

#240402073

Range of single hole, single outlet electronically controlled tap assemblies (chromium plated brass), incorporating a solenoid valve controlling the flow which is actuated via infrared sensor. The spouts incorporate plastic aerators. Maximum working pressure 8.0 Bar. Maximum operating temperature 65.0°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
240402073
Size:
Stainless steel braided, PEX lined flexible hose assemblies with 1/2" BSP captive nut end connections.
Marking:
Dudley on body.
Installation Requirements:
R001 R006 R009
Expiry date:
30/04/2029
Model:
Electroflo Arc Battery Electroflo Arc Mains

Approval Holder:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company

Print This Approval


#241002080

Range of single hole, single outlet (fixed) electronically controlled tap assemblies. Incorporating a solenoid valve activated via an infra-red sensor. The inlets to the control box incorporate stainless steel strainers and the outlet incorporates a plastic aerator. Maximum working pressure: 8 Bar Maximum operating temperature: 65°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
241002080
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
10mm Spigot x 1/2" BSP (F) adaptor connected to a ½” BSP (M) x ½” BSP (M) solenoid connected to stainless steel braided, PEX lined flexible hose assembly with a ½” BSP (F) captive nut
Marking:
Dudley Logo on sensor
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/10/2029
Model:
Electroflo Avanti Battery Electroflo Avanti Mains

Approval Holder:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company

Print This Approval


#2107901

Range of float operated valves with brass bodies manufactured to BS1212 Part 2 1990. The valves have ½’’ BSP inlets with plastic backnuts, brass or plastic back plates, an up and over type outlet discharge and a brass lever arm. Maximum working pressure 14.0 bar. For use with cold water only.

Section:
2075 Float Operated Inlet Valve
Section Subtitle:
Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.
WRAS Approval Number:
2107901
Note:
Not supplied with a float
Size:
see model
Marking:
The words ‘’Beta BS1212 Part 2’’ is embossed onto the brass body The word ‘’BETA’’ is moulded into the overhead discharge nozzle The word ‘’BETA’’ is embossed or moulded into the front face of the backplate.
Installation Requirements:
R001 R550 R554
Expiry date:
31/07/2026
Model:
DBL201A Side entry ½” BSP 1 ¼” tail - High pressure seat (Brass back plate). DBL201AX Side entry ½” BSP 1 ¼” tail - High pressure seat (Plastic back plate). DBL201B Side entry ½” BSP 2” tail - High pressure seat (Brass back plate). DBL201C Side entry ½” BSP 3” tail - High pressure seat (Brass back plate). DBL251A Side entry ½” BSP 1 ¼” tail - Low pressure seat (Brass back plate). DBL251B Side entry ½” BSP 2” tail - Low pressure seat (Brass back plate). DBL251C Side entry ½” BSP 3” tail - Low pressure seat (Brass back plate). DBL231A Side entry ½” BSP 1 ¼” tail - Medium pressure seat (Brass back plate).
Product Images

Approval Holder:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company
Manufacturer:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company

Print This Approval


#2107905

Range of float operated valves with plastic bodies and either brass or plastic inlet tails of the side or bottom entry type manufactured to BS1212 Part 3 1990. The valves have ½’’ BSP inlets with plastic backnuts, an up and over type outlet discharge and a plastic operating lever adjusted by a screw & lock nut. Maximum working pressure 14.0 bar. For cold water use only.

Section:
2075 Float Operated Inlet Valve
Section Subtitle:
Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.
WRAS Approval Number:
2107905
Note:
Not supplied with a float
Size:
½” BSP side inlet or ½’’ BSP 8” to 10” fixed height pedestal. ½” BSP inlet telescopic (adjustable height 8” to 11½”).
Marking:
The front face of the backplate is marked with the words: ‘’T.DUDLEY BS 1212 PART 3’’ OR ‘’CRONEX BS 1212 PART 3’’ AND ‘’COLD WATER ONLY’’
Installation Requirements:
R001 R280 R550 R554 R560 R562
Expiry date:
31/07/2026
Proviso:
IRN R560 applies to the bottom entry inlet valves only IRN R562 applies to the telescopic inlet valve only
Model:
Beta+ Side entry (plastic tail). Beta+ Side entry (brass tail). Beta+ 8” to 10” Pedestal (plastic tail). Beta+ Telescopic pedestal (brass tail).
Product Images

Approval Holder:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company
Manufacturer:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company

Print This Approval


#2107908

Range of BS1212 Part 3 1990 float operated valves incorporating plastic bodies of either the side or bottom entry type. Maximum working pressure 14.0 bar. For cold water use only.

Section:
2075 Float Operated Inlet Valve
Section Subtitle:
Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.
WRAS Approval Number:
2107908
Note:
Not supplied with a float
Size:
½” BSP Side inlet, ½” BSP Pedestal Bottom Inlet, Heights 8” to 10”
Marking:
‘’T.DUDLEY BS 1212 PART 3’’ OR ‘’CRONEX BS 1212 PART 3’’ AND ‘’COLD WATER ONLY’’
Installation Requirements:
R001 R280 R550 R554 R560
Expiry date:
31/07/2026
Proviso:
IRN R560 applies to the bottom entry inlet valve only
Model:
401, 401E - Side Entry 451, 451E - 8” to 10” Pedestal Bottom Entry
Product Images

Approval Holder:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company
Manufacturer:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 6 of 11

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.