Directory Search Results

Print List

#2103031

Nucyl ranges of Direct & Indirect stainless steel insulated unvented hot water storage cylinders with external expansion. The DHW circuit consists of a temperature and pressure relief valve set at 7.0 bar and 90°C, an inlet control group consisting of a pressure reducing valve adjustable between 2.7 and 3.3 bar, an expansion relief valve (SRV) set at 6.0 bar, a strainer and a check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2) also supplied with a tundish. Maximum supply pressure to the inlet control group 10.0 bar. Maximum working pressures - Primary circuit 6.0 bar, Secondary circuit 5.5 bar. Maximum operating temperature 65˚C.

Section:
1890 Unvented Heating Apparatus
WRAS Approval Number:
2103031
Note:
Expansion vessels should be installed in the vertical orientation and located so that the length of the connecting pipework is kept to a minimum.
Size:
22mm compression (Inlet Manifold)
Marking:
UK CYLINDERS NUCYL on front, technical information on adhesive label on body.
Installation Requirements:
R001 R140 R360
Expiry date:
31/03/2026
Proviso:
All solar models must be installed in accordance with this proviso: WRAS Approval - Solar heating system components. “Compliance with the relevant requirements of the Water Supply (Water Fittings) Regulations 1999 has been assessed for this product only as a component of a heating system. If it is to be installed as part of a system using solar energy or ground- or air- source heat pumps for pre-heating water which is to be used as domestic hot water, the Water Fittings Regulations place a legal duty on the installer and user to ensure that the installation and operation of the complete system prevents contamination of domestic hot water by Legionella bacteria, which can grow in water stored at temperatures between 20°c and 45°c.
Model:
WWA90D -WHITEWOLF ALPHA 90 DIRECT UNVENTED HOT WATER STORAGE CYLINDER NUDIR0090-UK CYLINDERS NUCYL 90 DIRECT UNVENTED HOT WATER STORAGE CYLINDER WWA120D -WHITEWOLF ALPHA 120 DIRECT UNVENTED HOT WATER STORAGE CYLINDER NUDIR0120 – UK CYLINDERS NUCYL 120 DIRECT UNVENTED HOT WATER STORAGE CYLINDER WWA150D -WHITEWOLF ALPHA 150 DIRECT UNVENTED HOT WATER STORAGE CYLINDER NUDIR0150 – UK CYLINDERS NUCYL 150 DIRECT UNVENTED HOT WATER STORAGE CYLINDER WWA170D -WHITEWOLF ALPHA 170 DIRECT UNVENTED HOT WATER STORAGE CYLINDER NUDIR0170 – UK CYLINDERS NUCYL 170 DIRECT UNVENTED HOT WATER STORAGE CYLINDER WWA200D -WHITEWOLF ALPHA 200 DIRECT UNVENTED HOT WATER STORAGE CYLINDER NUDIR0200 – UK CYLINDERS NUCYL 200 DIRECT UNVENTED HOT WATER STORAGE CYLINDER WWA250D -WHITEWOLF ALPHA 250 DIRECT UNVENTED HOT WATER STORAGE CYLINDER FNUIR0250 – UK CYLINDERS NUCYL 250 DIRECT UNVENTED HOT WATER STORAGE CYLINDER WWA300D -WHITEWOLF ALPHA 300 DIRECT UNVENTED HOT WATER STORAGE CYLINDER. NUDIR0300 – UK CYLINDERS NUCYL 300 DIRECT UNVENTED HOT WATER STORAGE CYLINDER. WWA90I -WHITEWOLF ALPHA 90 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER NUIND0090-UK CYLINDERS NUCYL 90 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER WWA120I -WHITEWOLF ALPHA 120 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER NUIND0120-UK CYLINDERS NUCYL 120 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER WWA150I-WHITEWOLF ALPHA 150 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER. NUIND0150-UK CYLINDERS NUCYL 150 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER. WWA170I-WHITEWOLF ALPHA 170 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER NUIND0170-UK CYLINDERS NUCYL 170 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER WWA200IWHITEWOLF ALPHA 200 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER NUIND0200-UK CYLINDERS NUCYL 200 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER WWA250I-WHITEWOLF ALPHA 250 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER. NUIND0250-UK CYLINDERS NUCYL 250 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER. WWA300I-WHITEWOLF ALPHA 300 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER NUIND0300-UK CYLINDERS NUCYL 300 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER

Approval Holder:
UK CYLINDERS LTD
Company Name
UK CYLINDERS LTD
Address
UNIT 3 RCM BUSINESS CENTRE WEST YORKSHIRE
Postcode
WF5 9ND

View All Listings by this Company

Print This Approval


#2104018

Range of air venting valves incorporating an epoxy coated, iron body and a drain point. Maximum working pressure 16.0 bar. Maximum operating temperature 60˚C.

Section:
1980 Valves
Section Subtitle:
Air venting. Fittings in this section are suitable for above ground installations only.
WRAS Approval Number:
2104018
Note:
Fittings in this section are suitable for above ground installations only.
Size:
See model.
Marking:
TT Flow Valves (division of TT Pumps Ltd.), DN, PN, model and year of manufacture (YYYY) on data plate. Size and year of manufacture (YYYY) on body.
Installation Requirements:
R001
Expiry date:
30/04/2026
Model:
Aquabrake(R) range of air valves: Double orifice Aquabrake(R) 3F 1” & 2” BSP female inlet. Aquabrake(R) 3F DN50 - DN200. Double orifice with anti-surge Aquabrake(R) 3F AS 1” & 2” BSP female inlet Aquabrake(R) 3F AS DN50 - DN200. Double orifice with rapid fill protection Aquabrake(R) 3F RFP 1 & 2” BSP female inlet Aquabrake(R) 3F RFP DN50 - DN200.

Approval Holder:
T-T Pumps Limited
Company Name
T-T Pumps Limited
Address
Newcastle Road, Woore, Cheshire.
Postcode
CW3 9RU.
Phone
(01630) 647 200

View All Listings by this Company
Manufacturer:
T-T Pumps Limited
Company Name
T-T Pumps Limited
Address
Newcastle Road, Woore, Cheshire.
Postcode
CW3 9RU.
Phone
(01630) 647 200

View All Listings by this Company

Print This Approval


#2104031

Range of air venting valves with a blue epoxy coated ductile iron body and carbon steel cover, NBR ‘O’-rings and EPDM seals. Maximum working pressure 10.0 bar or 16.0 bar (see model). Maximum operating temperature 65°C.

Section:
1980 Valves
Section Subtitle:
Air venting. Fittings in this section are suitable for above ground installations only.
WRAS Approval Number:
2104031
Note:
Fittings in this section are suitable for above ground installations only.
Size:
DN50 to DN300 flanged inlet/outlet
Marking:
OZ-KAN, PN, DN and EN on body. OZ-KAN, DN, PN and date of manufacture (YYYY) on data plate on body.
Installation Requirements:
R001
Expiry date:
30/04/2026
Model:
10.0 bar models: DDV01501A1101SST (DN 150). DDV02001A1101SST (DN 200). DDV02501A1101SST (DN 250). DDV03001A1101SST (DN 300). 16.0 bar models: DDV00502A1201SST (DN 0050). DDV00652A1201SST (DN 0065). DDV00802A1201SST (DN 0080). DDV01002A1201SST (DN 0100). DDV01252A1201SST (DN 0125). DDV01502A1201SST (DN 0150). DDV02002A1201SST (DN 0200). DDV02502A1201SST (DN 0250). DDV03002A1201SST (DN 0300).

Approval Holder:
Özkan Makina Elemanları San. Ve Tic. A.Ş.
Company Name
Özkan Makina Elemanları San. Ve Tic. A.Ş.
Address
10032 Sokak, No:27 Atatürk O.S.B. Çiğli İzmir
Postcode
35620
Country
Turkey
General Email
btuzun@oz-kan.com.tr

View All Listings by this Company
Manufacturer:
Özkan Makina Elemanları San. Ve Tic. A.Ş.
Company Name
Özkan Makina Elemanları San. Ve Tic. A.Ş.
Address
10032 Sokak, No:27 Atatürk O.S.B. Çiğli İzmir
Postcode
35620
Country
Turkey
General Email
btuzun@oz-kan.com.tr

View All Listings by this Company

Print This Approval


#2104061

Range of air venting valves incorporating an epoxy coated, iron body and a drain point. Maximum working pressure 16.0 bar. Maximum operating temperature 60˚C.

Section:
1980 Valves
Section Subtitle:
Air venting. Fittings in this section are suitable for above ground installations only.
WRAS Approval Number:
2104061
Note:
Fittings in this section are suitable for above ground installations only.
Size:
See model.
Marking:
CSA FOX & SIZE ON BODY CSA & FOX ON DATA PLATE
Installation Requirements:
R001
Expiry date:
30/04/2026
Model:
Double orifice FOX & LYNX 1” & 2” BSP female inlet. DN50 - DN200. Double orifice with anti-surge FOX AS & LYNX AS 1” & 2” BSP female inlet DN50 - DN200. Double orifice with rapid fill protection FOX RPF & LYNX RFP 1 & 2” BSP female inlet DN50 - DN200.
Product Images

Approval Holder:
CSA S.r.l
Company Name
CSA S.r.l
Address
Strada San Giuseppe 15 Localita Ponteghiara - 43039 Salsomaggiore Terme (PR)
Country
Italy
Phone
+390524523978
General Email
peter@ttflow.com

View All Listings by this Company

Print This Approval


#2107701

Range of wall mounted, concealed, manual blending valves with either a dome type or single lever operating member. Maximum working pressure 5.0 bar. Maximum operating temperature 80°C.

Section:
2000 Shower Valves
Section Subtitle:
Shower valve(s) with manual temperature control.
WRAS Approval Number:
2107701
Note:
These valves do not incorporate a flow control device.
Size:
½” BSP (F)
Marking:
Galvincare on faceplate
Installation Requirements:
R001 R010 R040
Expiry date:
31/07/2026
Model:
Galvincare CP 50197UK & Galvincare CP 50200UK

Approval Holder:
Galvin Engineering
Company Name
Galvin Engineering
Address
410 Victoria Road Malaga WA 6090
Country
Australia

View All Listings by this Company
Manufacturer:
Galvin Engineering
Company Name
Galvin Engineering
Address
410 Victoria Road Malaga WA 6090
Country
Australia

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 50 of 224

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.