Range of UV disinfection units with stainless steel bodies & quartz tubes. All models incorporate a spherical valve on the drain outlet. Maximum working pressure 16.0 bar. Maximum operating temperature 50°C

Section:

2411 Disinfection Equipment

Size:

1” BSP, 1½” BSP & 2” BSP male inlet and outlet.

Marking:

Hydrotec, model, WRAS and technical information on adhesive label on body.

Installation Requirements:

R001 R150 R170 R511

Expiry date:

31/05/2027

Model:

HydroWELL Compact 1E DN40. HydroWELL Compact 2E DN25. HydroWELL Compact 5E DN40. HydroWELL Compact 7E DN50. HydroWELL Compact 10E DN50.

Approval Holder:

Hydrotec International Water Treatment Limited

Company Name

Hydrotec International Water Treatment Limited

Address

38 Main Street Swords Country Dublin

Country

Ireland

View All Listings by this Company

Range of UV disinfection units with stainless steel bodies and EPDM seals. The UV lamps are housed inside quartz tubes. Maximum working pressure 10.3 bar. Maximum operating temperature 40°C.

Section:

2411 Disinfection Equipment

Size:

Please refer to model.

Marking:

Salmist, model and technical information on adhesive label on body.

Installation Requirements:

R001 R120 R150 R170 R290

Expiry date:

31/05/2027

Model:

SAUVx-02X (½” female NPT). SAUVx-03X & SAUVX-10X (½” male NPT). SAUVx-06X (¾” male NPT). SAUVx-08X, SAUVx-15X & SAUVx-20X (1” male NPT). SAUVHx-05X & SAUVHx-10X (¾” male NPT). SAUVHx-15X & SAUVHx-25X (1” male NPT) SAUVHx-40X (1½” male NPT inlet and outlet). ‘x’ denotes controller option and can be replaced with: 4 = controller does not support UV sensor, ships with plug as standard. 5 = can accept optional UV sensor, ships with plug as standard. 6 = controller is same as LB5, but the LB6 system ships with UV sensor as standard. ‘X’ denotes power cord and can be replaced with 1, 2, 3 or 4.

Approval Holder:

DALES WATER SERVICES LIMITED

Company Name

DALES WATER SERVICES LIMITED

Address

WITHERICK LANE RIPON

Postcode

HG4 5JB

Country

United Kingdom

View All Listings by this Company

'Bottom Plate K3'. Off-white (opaque) coloured, injection moulded POM component. For use with water up to 65°C.

Section:

5010 Acetal (Components)

Expiry date:

31/05/2027

Approval Holder:

Flühs Drehtechnik GmbH

Company Name

Flühs Drehtechnik GmbH

Address

Lösenbacher Landstr. 2, D-58515 Ludenscheid - Brugge

Country

Germany

View All Listings by this Company

'OSH046 (white) & OSH046 (grey)'. White or grey coloured, injection moulded ABS materials. For use with water up to 85°C.

Section:

5020 Acrylonitrile Butadeine Styrene Copolymer (ABS)

Expiry date:

31/05/2027

Approval Holder:

Xiamen Oshince Sanitary Co., Ltd.

Company Name

Xiamen Oshince Sanitary Co., Ltd.

Address

No.177 South Second Ring Road, Tong An Industrial District, Xiamen

Country

China

View All Listings by this Company

'LNXFSY'. Factory applied, grey coloured Portland Cement Mortar. Mix cement, sand and water in a 2:1:0.4 mass ratio and apply as per manufacturer's instructions issue 'X202101207F' dated '2021-12-07'. Cure for 12 hours@55°C. For use with water up to 65°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the materials are not covered by the scope of the approval.

Section:

5030 Coatings, Paints & Linings

Section Subtitle:

Factory applied pipe & fittings coatings.

WRAS Approval Number:

2205522

Expiry date:

31/05/2027

Approval Holder:

Liaoning Xinfeng Industrial Co. Ltd.

Company Name

Liaoning Xinfeng Industrial Co. Ltd.

Address

SME Park, Xianrendao Energy & Chemical Industry Zone, Yingkou City, Liaoning Province

Country

China

View All Listings by this Company