'Acrylatik'. Site applied, Acrylate primers available in white, red, blue and black colours. Apply as per manufacturer's instructions 'Appendix No. 1, TU 2316-002-92 872914-2016' dated '11.02.2016'. Cure for 20 minutes@20°C and then 20 minutes@90°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5042 Coatings, Paints & Linings

Section Subtitle:

Site applied pipe and fittings coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.

WRAS Approval Number:

2104548

Expiry date:

30/04/2026

Approval Holder:

LLC 'ShLKZ' Paints Belogorya

Company Name

LLC 'ShLKZ' Paints Belogorya

Address

309295, Belgorod Region, Shebekino, st. Rzhevskoe shosse,16, Floor 1, Office 02

Country

Russian Federation

View All Listings by this Company

'Belzona 1331'. Grey coloured, site applied, two-component epoxy coating. There are two ways the coating may be prepared: First coat: Mix Belzona 1331 (white, opaque paste) parts A & B in a weight ratio of 2.2:1, apply and then cure for 2 days@30°C then apply: Second coat: Mix Belzona 1331 (grey, opaque paste) parts A & B in a weight ratio of 2.2:1, apply and then cure for 2 days@30°C. OR: First coat: Mix Belzona 1331 (white, opaque paste) parts A & B in a weight ratio of 2.2:1, apply and then cure for 14 days@10°C then apply: Second coat: Mix Belzona 1331 (grey, opaque paste) parts A & B in a weight ratio of 2.2:1, apply and then cure for 14 days@10°C. For use with water up to 23°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mix and/or cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5042 Coatings, Paints & Linings

Section Subtitle:

Site applied pipe and fittings coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.

WRAS Approval Number:

2006530

Expiry date:

30/06/2025

Approval Holder:

Belzona Polymerics Ltd.

Company Name

Belzona Polymerics Ltd.

Address

Claro Road, Harrogate, Yorks.

Postcode

HG1 4AY

Phone

+44 1423 567641 Fax: 01423 505967

View All Listings by this Company

'Purolite® A600E/9149'. Yellow coloured ion exchange resin. For use with water up to 23°C.

Section:

5150 Ion Exchange Resin

Expiry date:

30/06/2026

Approval Holder:

Purolite Ltd.

Company Name

Purolite Ltd.

Address

Unit D Llantrisant Business Park, Llantrisant, RCT

Postcode

CF72 8LF

Country

Wales

Phone

+44 (0) 1443 229 334

General Email

sales@purolite.com

View All Listings by this Company

'Krytox™ Oils; GPL 104, 143AB, VPF 1525, VPF 1531, AUT 1045, GPL 105, GPL 106, 143AC, 143AD & GPL 107'. Clear (colourless), perfluoropolyether oils. 'Krytox™ Greases; GPL 204, 240AB, AUT 2045, GPL 205, GPL 206, 240AC, 240AD & GPL 207'. White coloured, Polytetrafluoroethylene thickened perfluoropolyether greases. All are suitable for use with water up to 85°C.

Section:

5160 Lubricants

Expiry date:

31/03/2026

Approval Holder:

Chemours International Operations Sàrl,

Company Name

Chemours International Operations Sàrl,

Address

2 chemin du Pavillon, CH-1218, Le Grand Saconnex

Country

Switzerland

View All Listings by this Company

‘4TECH 9G22130 W-A ABK, 4TECH 9G22135 W-A ABK, 4TECH 9G22140 W-A ABK, 4TECH 9G22145 W-A ABK, 4TECH 9G22150 W-A ABK, 4TECH 9G22155 W-A ABK & 4TECH 9G22160 W-A ABK’. Black coloured, glass-fibre reinforced PA66 materials. For use with water up to 23°C.

Section:

5180 Nylon

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2102537

Expiry date:

28/02/2026

Approval Holder:

4Plas Ltd.

Company Name

4Plas Ltd.

Address

7 Aldin Way, Hinckley, Leicestershire

Postcode

LE10 0GE

View All Listings by this Company