'MC90'. Natural (appears white), injection moulded POM material. For use with water up to 85°C.
‘Nelfapox FW Inert Cream'. Factory applied, cream coloured, two-component epoxy coating. Mix base and curing agent in a 6.8:2 volume ratio. Apply one or two coats as per manufacturer's Technical Data Sheet '999', revision date '24-03-2026'. Cure Coat 1 for 16 hours@20°C. Cure Coat 2 for 7 days@20°C. For use with water up to 60°C. These materials are only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the materials are not covered by the scope of the approval.
'NextGen NP-F9500 PW'. Factory applied, blue coloured powder coating. Apply as per National Paints technical data sheet 'FBE/ REV01 09-07-2019'. Cure for 3 minutes@240°C. For use with water up to 85°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.
'ShaliPoxy 400 FG'. Factory applied, white coloured, two-component epoxy coating. Mix components A & B in a volume ratio of 3:1 and apply as per manufacturer’s TDS ‘0982019’. Cure for 7 days@27°C. For use with water up to 23°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mix and/or cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.
'Lewatit S 8227 & S 8229'. 'Lewatit® S 8229 Plus X' was added to the approval in March 2026. White coloured ion exchange resins. For use with water up to 23°C.
'Revolve M-638, M-694 & M-695'. Black coloured Polyethylene materials manufactured using rotational moulding. For use with water up to 85°C.
‘E4028WCC, E4510WCC, E5076WCC, E5522WCC, E6020WCC, E6020, E6541WCC, E7091WCC, E7091, E7528WCC, E8027WCC, E8506WCC & E9011WCC ‘O’ rings’. Black coloured, compression moulded EPDM ‘O’ rings. Shore hardness between 40 & 90. Tested in-radius size between 0.5mm & 3.5mm. ‘E4028WCC Gaskets’. Black coloured, compression moulded EPDM gaskets. Shore hardness 40. Tested in-radius size 0.8mm. For use with water up to 85°C.
'FOWRY-190920'. Black coloured, compression moulded EPDM rubber. Shore hardness 75. Tested in-radius size 3.0mm. For use with water up to 85°C.
'E7015'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.19mm. For use with water up to 23°C.
'SQ-30T-W, SQ-40T-W, SQ-50T-W, SQ-60T-W, SQ-70T-W, SQ-80T-W, & SQ-90T-W (transparent, unpigmented)'. ‘SQ-30R-W, SQ-40R-W, SQ-50R-W, SQ-60R-W, SQ-70R-W, SQ-80R-W, & SQ-90R-W (red coloured)'. ‘SQ-30B-W, SQ-40B-W, SQ-50B-W, SQ-60B-W, SQ-70B-W, SQ-80B-W, & SQ-90B (blue coloured)'. Range of compression moulded, silicone rubber materials. Shore hardness between 30 & 90. Tested in-radius size 0.9mm. For use with water up to 85°C:
Page 438 of 446
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
