'Proofex HDPE B125'. White coloured, extruded HDPE waterproofing membrane. For use with water up to 60°C.

Section:

5240 Polyethylene

Section Subtitle:

Components. All components listed in this section have been tested for water contact suitability of material only.

WRAS Approval Number:

250855021

Expiry date:

31/08/2030

Approval Holder:

Fosam Company Limited (Saudi Fosroc)

Company Name

Fosam Company Limited (Saudi Fosroc)

Address

1st Industrial City, Phase 4, Road No.121, Street No.82, PO Box 11081, Jeddah 21453

Country

Saudi Arabia

View All Listings by this Company

'Hepworth Qatar PPR 125 Pipe'. Green coloured (opaque), extruded PPR pipe. For use with water up to 85°C.

Section:

5260 Polypropylene

Section Subtitle:

Components.

WRAS Approval Number:

250955012

Expiry date:

30/09/2030

Approval Holder:

Hepworth PME (Qatar) WLL

Company Name

Hepworth PME (Qatar) WLL

Address

Mesaieed Industrial City - Light Industrial Area, PO Box 50207

Country

Qatar

Phone

+974 4760 588

View All Listings by this Company

‘Udel P-3500 NT LCD, GF-110 NT, GF-120 NT, GF-121 NT, P-1700 NT 11 MR, P-1700 NT 11, GF-121 NT ECHO RP & P-3500 NT LCD ECHO RP’ (all beige translucent). ‘Udel P-1700 Grey 8057’ (grey coloured). ‘Udel P-1700 BK 937, P-1700 BK 937 MR, GF-120 BK 937, GF-121 BK 937, GF-121 BK 937 ECHO RP, GF-120 BK 937 ECHO RP & P-1700 BK937 ECHO RP’ (all black coloured). ‘Udel P-1700 WH 7407’ (white coloured). Injection moulded, polysulphone materials. For use with water up to 85°C.

Section:

5280 Polysulphone

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

251055011

Expiry date:

31/10/2030

Approval Holder:

Syensqo Specialty Polymers USA, LLC

Company Name

Syensqo Specialty Polymers USA, LLC

Address

4500 McGinnis Ferry Road, Alpharetta, Georgia 30005

Country

United States

View All Listings by this Company

'Tecoflex TU40 GR30 GR128 HS D6 QF'. Light grey coloured, injection moulded TPU material. For use with water up to 23°C.

Section:

5297 Polyurethane

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

250755049

Expiry date:

31/07/2030

Approval Holder:

Eurotec Muhendislik Plastikleri San. ve Tic. A.S.

Company Name

Eurotec Muhendislik Plastikleri San. ve Tic. A.S.

Address

Karamehmet Mah. Avrupa Serbest Bolgesi, Avrasya Bulvari No: 8, TR 59930 Ergene

Country

Turkey

View All Listings by this Company

‘AQI380PRO’. Site applied, two-part (resin & hardener is automatically mixed in a 10:1 volume ratio through dispensing nozzle) anchor resins. Apply and cure as per ’Load time’ cures set out in Table B4 of European Technical Assessment ETA 19/0127’, dated ‘28/02/2019’. For use with water up to 65°C. If the cure conditions are varied from those specified in ’Load time’ cures set out in set out in Table B4 of European Technical Assessment ‘ETA 19/0127’ then the materials are not covered by the scope of the approval. For use only as a resin anchor having been tested at a reduced surface area to volume ratio of 1,000mm² per 1 litre of water.

Section:

5311 Resin Anchors

Expiry date:

30/06/2030

Approval Holder:

Ancora

Company Name

Ancora

Address

Av. da Saudade, 690, Jd. Santa Rosa - Vinhedo/SP, CEP: 13289-010

Country

Brazil

View All Listings by this Company