Range on inline filter cartridges incorporating plastic bodies. The filter media varies between models and includes active carbon, silver impregnated active carbon, silver carbon block & weak/strong cationic resin. Maximum working pressure 6.0 bar. Cold water use only.

Section:

1055 Filter Cartridges

Size:

See model

Marking:

Profine and other technical information on body.

Installation Requirements:

R001 R008 R120 R170 R290

Expiry date:

31/01/2026

Model:

33.65mm OD: Brown Small, Medium & Large. 3/8” BSP (M): Cartridge Profine Big Brown 2.0, 3.0, 4.0 & 6.0. Cartridge Profine Big Brown 2.0. 3.0, 4.5, 6.0. Cartridge Profine Big Brown 2.0. 3.0. 4.5 & 6.0.

Approval Holder:

Think Water Srl

Company Name

Think Water Srl

Address

Via Delle Pezze 35 Cittadella (PD)

Postcode

35013

Country

Italy

Phone

(+39) 049 9403792

General Email

riccardo.favero@thinkwater.com

View All Listings by this Company

Range of copper press fittings with EPDM seals for use with EN1057 copper tube. The joints are achieved by means of a press tool. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2112371

Size:

see models

Marking:

Valtech on body

Installation Requirements:

R001

Expiry date:

31/12/2026

Model:

CPM05 Press 90°Bend C×C (12,15,22,28,35,42,54mm) CPM07 Press 90° Bend FTG×C(12,15,22,28,35,42,54mm) CPM08 Press 45° Bend C×C (12,15,22,28,35,42,54mm) CPM09 Press 45° Bend FTG×C (12,15,22,28,35,42,54mm) CPM10 Press Tee C×C×C (12,15,22,28,35,42,54mm) CPM11 Press ReducingTee C×C×C (15×15×12, 22×22×15, 22×22×12, 22×15×15, 22×15×22, 28×28×22, 28×28×15, 28×15×22, 28×22×22, 28×15×28, 28×22×28, 35×35×28, 35×35×22,35×35×15, 42×42×35, 42×42×28, 42×42×22, 42×42×15, 54×54×42, 54×54×35, 54×54×28, 54×54×22) CPM12 Press Cap (12,15,22,28,35,42,54mm) CPM01 Press Coupling C×C (12,15,22,28,35,42,54mm) CPM04 Press Fitting Reducer Ftg×C (15×12, 22×15, 28×22, 28×15, 35×28, 35×22, 42×35, 42×28, 42×22, 54×42, 54×35, 54×28, 54×22) CPM03 Press Reducing Coupling C×C (15×12, 22×15, 28×22, 28×15, 35×28, 35×22, 42×35, 42×28, 42×22, 54×42, 54×35)

Approval Holder:

Ningbo Valtech Flow Control Co. Ltd.

Company Name

Ningbo Valtech Flow Control Co. Ltd.

Address

Room 610 New Oriental Times Building No.1130

Country

Baizhang East Road

Phone

0574-88001556

View All Listings by this Company

Range of press fittings with a stainless steel body and EPDM ‘O’ rings for use with stainless steel 316L pipe manufactured to EN10312. For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2101368

Size:

see model

Marking:

Ducco and size on body.

Installation Requirements:

R001

Expiry date:

31/01/2026

Model:

Equal Coupling DS2001-15 15mm Equal Coupling DS2001-18 18mm Equal Coupling DS2001-22 22mm Equal Coupling DS2001-28 28mm Equal Coupling DS2001-35 35mm Equal Coupling DS2001-42 42mm Equal Coupling DS2001-54 54mm Adjustable Coupling DS2002-15 15mm Adjustable Coupling DS2002-18 18mm Adjustable Coupling DS2002-22 22mm Adjustable Coupling DS2002-28 28mm Adjustable Coupling DS2002-35 35mm Adjustable Coupling DS2002-42 42mm Adjustable Coupling DS2002-54 54mm 90D Equal Elbow DS2003-15 15mm 90D Equal Elbow DS2003-18 18mm 90D Equal Elbow DS2003-22 22mm 90D Equal Elbow DS2003-28 28mm 90D Equal Elbow DS2003-35 35mm 90D Equal Elbow DS2003-42 42mm 90D Equal Elbow DS2003-54 54mm 90D Plain Elbow-B DS2004-15 15mm 90D Plain Elbow-B DS2004-18 18mm 90D Plain Elbow-B DS2004-22 22mm 90D Plain Elbow-B DS2004-28 28mm 90D Plain Elbow-B DS2004-35 35mm 90D Plain Elbow-B DS2004-42 42mm 90D Plain Elbow-B DS2004-54 54mm 45D Equal Elbow DS2005-15 15mm 45D Equal Elbow DS2005-18 18mm 45D Equal Elbow DS2005-22 22mm 45D Equal Elbow DS2005-28 28mm 45D Equal Elbow DS2005-35 35mm 45D Equal Elbow DS2005-42 42mm 45D Equal Elbow DS2005-54 54mm 45D Plain Elbow-B DS2006-15 15mm 45D Plain Elbow-B DS2006-18 18mm 45D Plain Elbow-B DS2006-22 22mm 45D Plain Elbow-B DS2006-28 28mm 45D Plain Elbow-B DS2006-35 35mm 45D Plain Elbow-B DS2006-42 42mm 45D Plain Elbow-B DS2006-54 54mm Equal Tee DS2007-15 15mm Equal Tee DS2007-18 18mm Equal Tee DS2007-22 22mm Equal Tee DS2007-28 28mm Equal Tee DS2007-35 35mm Equal Tee DS2007-42 42mm Equal Tee DS2007-54 54mm Reducing Tee DS2008-18*15 18mmx15mm Reducing Tee DS2008-22*15 22mmx15mm Reducing Tee DS2008-22*18 22mmx18mm Reducing Tee DS2008-28*22 28mmx22mm Reducing Tee DS2008-35*22 35mmx22mm Reducing Tee DS2008-35*28 35mmx28mm Reducing Tee DS2008-42*28 42mmx28mm Reducing Tee DS2008-42*35 42mmx35mm Reducing Tee DS2008-54*28 54mmx28mm Reducing Tee DS2008-54*35 54mmx35mm Reducing Tee DS2008-54*42 54mmx42mm Female Coupling DS2009-15*Rp1/2 15mmxRp1/2" Female Coupling DS2009-22*Rp3/4 22mmxRp3/4" Female Coupling DS2009-28*Rp1 28mmxRp1" Female Coupling DS2009-35*Rp1 1/4 35mmxRp1-1/4" Female Coupling DS2009-42*Rp1 1/2 42mmxRp1-1/2" Female Coupling DS2009-54*Rp2 54mmxRp2" Rotatable Coupling DS2010-15*G1/2 15mmxG1/2" Rotatable Coupling DS2010-22*G3/4 22mmxG3/4" Rotatable Coupling DS2010-28*G1 28mmxG1" Rotatable Coupling DS2010-35*G1 1/4 35mmxG1-1/4" Item Description Secondary Code Size (OD) Rotatable Coupling DS2010-42*G1 1/2 42mmxG1-1/2" Rotatable Coupling DS2010-54*G2 54mmxG2" Male Coupling DS2011-15*R1/2 15mmxR1/2" Male Coupling DS2011-22*R3/4 22mmxR3/4" Male Coupling DS2011-28*R1 28mmxR1" Male Coupling DS2011-35*R1 1/4 35mmxR1-1/4" Male Coupling DS2011-42*R1 1/2 42mmxR1-1/2" Male Coupling DS2011-54*R2 54mmxR2" Female Elbow DS2012-15*Rp1/2 15mmxRp1/2" Female Elbow DS2012-22*Rp3/4 22mmxRp3/4" Female Elbow DS2012-28*Rp1 28mmxRp1" Female Elbow DS2012-35*Rp1 1/4 35mmxRp1-1/4" Female Elbow DS2012-42*Rp1 1/2 42mmxRp1-1/2" Female Elbow DS2012-54*Rp2 54mmxRp2" Male Elbow DS2013-15*R1/2 15mmxR1/2" Male Elbow DS2013-22*R3/4 22mmxR3/4" Male Elbow DS2013-28*R1 28mmxR1" Male Elbow DS2013-35*R1 1/4 35mmxR1-1/4" Male Elbow DS2013-42*R1 1/2 42mmxR1-1/2" Male Elbow DS2013-54*R2 54mmxR2" Female Tee DS2014-15*Rp1/2 15mmxRp1/2" Female Tee DS2014-22*Rp3/4 22mmxRp3/4" Female Tee DS2014-28*Rp1 28mmxRp1" Female Tee DS2014-35*Rp1 1/4 35mmxRp1-1/4" Female Tee DS2014-42*Rp1 1/2 42mmxRp1-1/2" Female Tee DS2014-54*Rp2 54mmxRp2" Male Tee DS2015-15*R1/2 15mmxR1/2" Male Tee DS2015-22*R3/4 22mmxR3/4" Male Tee DS2015-28*R1 28mmxR1" Male Tee DS2015-35*R1 1/4 35mmxR1-1/4" Male Tee DS2015-42*R1 1/2 42mmxR1-1/2" Male Tee DS2015-54*R2 54mmxR2" Reducer-A DS2016-18*15 18mmx15mm Reducer-A DS2016-22*18 22mmx18mm Reducer-A DS2016-28*22 28mmx22mm Reducer-A DS2016-35*28 35mmx28mm Reducer-A DS2016-42*35 42mmx35mm Reducer-A DS2016-54*42 54mmx42mm Reducer Coupling-B DS20107-18*15 18mmx15mm Reducer Coupling-B DS20107-22*18 22mmx18mm Reducer Coupling-B DS20107-28*22 28mmx22mm Reducer Coupling-B DS20107-35*28 35mmx28mm Reducer Coupling-B DS20107-42*35 42mmx35mm Reducer Coupling-B DS20107-54*42 54mmx42mm

Approval Holder:

Gentler Industrial co., Ltd

Company Name

Gentler Industrial co., Ltd

Address

1F no 986

View All Listings by this Company

Range of end feed copper solder fittings for use with copper tube. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2112370

Size:

see models

Marking:

Valtech on body.

Installation Requirements:

R001

Expiry date:

31/12/2026

Model:

CSF28 90°Elbow Close Ruff C×C (8,10,12,15,22,28,35,42,54mm) CSF29 90°Street Elbow Close Ruff Ftg×C (8,10,12,15,22,28,35,42,54mm) CSF38 Reducing 90° Elbow C×C ( 22×15, 28×22, 28×15) CSF30 45°Elbow C×C(8,10,12,15,22,28,35,42,54mm) CSF39 45°Elbow FTG×C(8,10,12,15,22,28,35,42,54mm) CSF31 Equal Tee C×C×C(8,10,12,15,22,28,35,42,54mm) CSF32 Reducing TEE C×C×C (15×15×10, 15×15×12, 15×15×22, 22×22×28, 22×22×15, 22×22×12, 22×15×22, 22×15×15, 28×28×22, 28×28×15, 28×22×28, 28×22×22, 28×22×15, 28×15×28, 28×15×22,28×15×15, 35×35×28, 35×35×22, 35×35×15, 42×42×35, 42×42×28, 42×42×22, 42×42×15, 54×54×42,54×54×35, 54×54×28, 54×54×22, 54×54×15) CSF23 Equal Coupling C×C (8,10,12,15,22,28,35,42,54mm) CSF25 Reducing Coupling C×C (10×8, 12×10, 12×8, 15×12, 15×10, 15×8, 22×15, 22×12, 22×10, 28×22, 28×15, 28×12, 35×28, 35×22, 35×15, 42×35, 42×28, 42×22, 42×15, 54×42, 54×35, 54×28, 54×22, 54×15) CSF26 Fitting Reducer Ftg×C (10×8, 12×10, 12×8, 15×12, 15×10, 15×8, 22×15, 22×12, 22×10, 28×22, 28×15, 28×12, 35×28, 35×22, 35×15, 42×35, 42×28, 42×22, 42×15, 54×42, 54×35, 54×28, 54×22, 54×15) CSF27 Tube Cap (8,10,12,15,22,28,35,42,54mm) CSF33 Cross Over Coupling C×C(15,22mm) CSF40 Partial Cross Over Ftg×C (15,22mm) CSF34 Straight Tap Connector C×FI(15×1/2”, 15×3/4”, 22×3/4”) CSF35 Bent Tap Connector C×FI(15×1/2”, 15×3/4”, 22×3/4”) CSF07 90°Elbow Close Ruff C×C (6,8,10,12,15,22,28,35,42,54mm) CSF08 90°Street Elbow Close Ruff Ftg×C (6,8,10,12,15,22,28,35,42,54mm) CSF41 Reducing 90° Elbow C×C (12×10, 12×8, 15×12, 22×15, 28×22, 28×15, 35×28, 35×22, 42×35, 42×28,42x22,54×42, 54×35, 54×28) CSF10 45°Elbow C×C(6,8,10,12,15,22,28,35,42,54mm) CSF11 45°Elbow FTG×C(6,8,10,12,15,22,28,35,42,54mm) CSF42 90°Elbow Long Turn C×C 6,8,10,12,15,22,28,35,42,54mm) CSF43 90°Street Elbow Long Turn Ftg×C (6,8,10,12,15,22,28,35,42,54mm) CSF13 Equal Tee C×C×C(6,8,10,12,15,22,28,35,42,54mm) CSF45 Reducing TEE C×C×C (6x6x8, 8×8×6, 10×10×15, 12×12×10, 12×12×8, 12×10×10, 12×8×8, 15×15×22, 15×15×12,15×15×10, 15x15x8, 15×12×15, 15×12×12, 15×12×10, 15×12×8, 15x10x15, 15x10x10, 22×22×28, 22×22×15, 22×22×12, 22×15×22,22×15×15, 22×15×12,28×28×22, 28×28×15, 28×22×28, 28×22×22, 28×22×15, 28x15x28, 28x15x22, 28×15×15,35×35×28, 35×35×22, 35×35×15,35×28×35, 35×28×28, 35×28×22, 35×22×35, 35×22×28, 35×22×22, 35×15×35, 42×42×35,42×42×28, 42×42×22, 2x42x15, 42×35×42, 42×28×42, 42×22×42, 54×54×42, 54×54×35, 54×54×28, 54×54×22,54×54×15,54×42×54, 54×35×54) CSF01 Equal Coupling C×C (6,8,10,12,15,22,28,35,42,54mm) CSF04 Reducing Coupling C×C (8×6, 10×8, 10×6, 12×10, 12×8, 12×6, 15×12, 15×10, 15×8, 22×15, 22×12, 22×10, 28×22, 28×15, 28×12, 35×28, 35×22, 35×15, 42×35, 42×28, 42×22, 42×15, 54×42, 54×35, 54×28, 54×22, 54×15) CSF05 Fitting Reducer Ftg×C (8×6, 10×8, 10×6, 12×10, 12×8, 12×6, 15×12, 15×10, 15×8, 22×15, 22×12, 22×10, 28×22, 28×15,28×12, 35×28, 35×22, 35×15, 42×35, 42×28, 42×22, 42×15, 54×42, 54×35, 54×28, 54×22, 54×15) CSF16 Tube Cap (6,8,10,12,15,22,28,35,42,54mm) CSF46 Return Bend C×C(6,8,10,12,15,22,28,35,42,54mm) CSF14 Cross Over Coupling C×C(15,22mm) CSF15 Partial Cross Over Ftg×C (15,22mm) CSF21 Straight Tap Connector C×FI(15×1/2”, 15×3/4”, 22×3/4”) CSF19 Bent Tap Connector C×FI(15×1/2”, 15×3/4”, 22×3/4”)

Approval Holder:

Ningbo Valtech Flow Control Co. Ltd.

Company Name

Ningbo Valtech Flow Control Co. Ltd.

Address

Room 610 New Oriental Times Building No.1130

Country

Baizhang East Road

Phone

0574-88001556

View All Listings by this Company

Range of overhead shower outlets (chrome plated plastic bodies). Inlets incorporate a strainer. Maximum operating temperature 85°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2105326

Note:

Open outlet use only.

Size:

½” BSP (F)

Marking:

Aqualisa on body

Installation Requirements:

R001 R040

Expiry date:

31/05/2026

Model:

707553 200mm Fixed Head Chrome Square

Approval Holder:

Aqualisa Products Ltd.

Company Name

Aqualisa Products Ltd.

Address

Unit 6 The Flyers Way, Westerham, Kent

Postcode

TN6 1DE

Phone

07920 790367

General Email

tracey.jones@aqualisa.co.uk

View All Listings by this Company