Range of plastic push-fit fittings (available in black, white and grey) and a manifold (available in grey only) with EPDM or NBR ‘O’-rings. For use with copper pipe (manufactured to EN1057), PE-X pipe (manufactured to BS7291-3:2010) & PB pipe (BS EN 21003-2:2008). Maximum working pressure: 12.5 bar @ 20°C (Cold water use only). From September 2023 the products are suitable for 8.0 bar @ 65°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2303062

Size:

See models.

Marking:

JG logo and size moulded on the collet or body of fitting.

Installation Requirements:

R001 R008

Expiry date:

31/03/2028

Model:

GREY ACETAL FITTINGS COOLING MANIFOLD: NC2183 15mm x 3/8”. METRIC TO IMPERIAL ADAPTORS STRAIGHT CONNECTOR: NC462 15mm x ½”. UNEQUAL STRAIGHT CONNECTOR: NC2511 15mm x 3/8”. STEM TO TUBE ADAPTOR: NC2164 15mm x 3/8”, NC2173 15mm x ½”. STEM TO HOSE CONNECTOR: NC932 15mm x ½”. TUBE TO HOSE CONNECTOR: NC448 15mm x ½”, NC737 22mm x ½”, NC473 22mm x ¾”. ADAPTOR TEE: NC869 15mm x 15mm x 3/8”. STEM TO STEM ADAPTOR: NC478 15mm x 3/8”. ACETAL CM FITTINGS WITH EPDM O-RINGS FEMALE ADAPTOR WITH BSP THREAD: CM451513FS 15mm x 3/8”. TAP ADAPTOR WITH UNS THREAD: CM3210U7E 10mm x 7/16”. TAP ADAPTOR BSP THREAD: CM321014E 10mm x ½” BSP (F), CM3201S 15mm x ½” BSP (F). TAP ADAPTOR FLAT END BSP THREAD: CM321014FE 10mm x ½” BSP (F). TWO-WAY DIVIDER: CM2315W 15mm. STRAIGHT ADAPTOR BSP THREAD: CM011514S 15mm x ½” (M), CM011216S 22mm x ¾” (M). REDUCING STRAIGHT CONNECTOR: CM201510S 15mm x 10mm, CM201512W 15mm x 12mm. REDUCING ELBOW CONNECTOR: CM211210W 12mm x 10mm. SLIP CONNECTOR: CM-SC-15-S 15mm. STEM ELBOW: CM221515W 15mm x 15mm. BLACK ACETAL FITTINGS (METRIC SIZES) STRAIGHT ADAPTORS BSP THREAD: PM011012E 10mm x ¼” BSP (M), PM011013E 10mm x 3/8” BSP (M), PM011014E 10mm x ½” BSP (M), PM011513E 15mm x 3/8” BSP (M), PM011514E 15mm x ½” BSP (M), PM011516E 15mm x ¾” BSP (M), PM012216E 22mm x ¾” BSP (M). STRAIGHT ADAPTERS BSPT THREAD: PM011002E 10mm x ¼” BSPT (M), PM011003E 10mm x 3/8” BSPT (M), PM011004E 10mm x ½” BSPT (M). EQUAL STRAIGHT CONNECTORS: PM0410E 10mm, PM0415E 15mm, PM0422E 22mm. REDUCING STRAIGHT CONNECTORS: PM201004E 10mm x 4mm, PM201006E 10mm x 6mm, PM201008E 10mm x 8mm, PM201210E 12mm x 10mm. EQUAL ELBOW: PM0310E 10mm, PM0315E 15mm, PM0322E 22mm. REDUCING ELBOW CONNECTOR: PM211004E 10mm x 4mm, PM211006E 10mm x 6mm, PM211008E 10mm x 8mm, PM211210E 12mm x 10mm. STEM ELBOW: PM221010E 10mm x 10mm, PM221515E 15mm x 15mm, PM222222E 22mm x 22mm. SWIVEL ELBOW BSP THREAD: PM091012E 10mm x ¼”, PM091013E 10mm x 3/8”, PM091014E 10mm x ½”. SWIVEL ELBOW BSPT THREAD: PM091002E 10mm x ¼”, PM091003E 10mm x 3/8”, PM091004E 10mm x ½”. EQUAL TEE: PM0210E 10MM, PM0215E 15mm, PM0222E 22mm. REDUCING TEE: PM3022AE 22mm x 22mm x 15mm. SWIVEL TEE CENTRE LEG BSP THREAD: PM101012E 10mm x ¼”, PM101013E 10mm x 3/8”, PM101014E 10mm x ½”. SWIVEL TEE CENTRE LEG BSPT THREAD: PM101002E 10mm x ¼“, PM101003E 10mm x 3/8“, PM101004E 10mm x ½“. SWIVEL MALE RUN TEE BSP THREAD: PM111012E 10mm x ¼”, PM111013E 10mm x 3/8”, PM111014E 10mm x ½”. SWIVEL MALE RUN TEE BSPT THREAD: PM111002E 10mm x ¼“, PM111003E 10mm x 3/8“, PM111004E 10mm x ½“. BULKHEAD CONNECTOR: PM1210E 10mm, REDUCER: PM061210E 12mm x 10mm, PM061510E 15mm x 10mm, PM061512E 15mm x 12mm, PM061815E 18mm x 15mm, PM062215E 22mm x 15mm, PM062218E 22mm x 18mm. STEM ADAPTOR BSP THREAD: PM051012E 10mm x ¼” BSP (M), PM051013E 10mm x 3/8” BSP (M), PM051014E 10mm x ½” BSP (M), PM051513E 15mm x 3/8” BSP (M), PM051514E 15mm x ½” BSP (M), PM052214E 22mm x ½” BSP (M), PM052216E 22mm x ¾ ” BSP (M). STEM ADAPTOR BSPT THREAD: PM051002E 10mm x ¼” BSPT (M), PM051003E 10mm x 3/8” BSPT (M), PM051004E 10mm x ½” BSPT (M). TWO WAY DIVIDER: PM2310E 10mm, PM2315E 15mm. PLUG (RED & BLACK): PM0810R 10MM RED, PM0815E 15MM BLACK, PM0822E 22MM BLACK. END STOP: PM4615E 15mm, PM4622E 22mm. FEMALES ADAPTOR BSP THREAD: PM451015FE 10mm x 5/8”. U-BEND: PMUB15E 15mm. BACK PLATE ELBOW: 15PWB 15mm x ½” BSP. WHITE ACETAL FITTINGS BULKHEAD ELBOW: CM551516W 15mm x ¾” BSP.

Product Images

Approval Holder:

RELIANCE WORLDWIDE CORPORATION (UK) LTD

Company Name

RELIANCE WORLDWIDE CORPORATION (UK) LTD

Address

HORTON ROAD WEST DRAYTON

Postcode

UB7 8JL

Country

United Kingdom

Phone

+44 7730 052060

General Email

PETER.LANCASTER@RWC.COM

View All Listings by this Company

Manufacturer:

RELIANCE WORLDWIDE CORPORATION (UK) LTD

Company Name

RELIANCE WORLDWIDE CORPORATION (UK) LTD

Address

HORTON ROAD WEST DRAYTON

Postcode

UB7 8JL

Country

United Kingdom

Phone

+44 7730 052060

General Email

PETER.LANCASTER@RWC.COM

View All Listings by this Company

Range of end feed copper fittings for use with copper tube to EN 1057. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2208819

Size:

End feed: 8mm-108mm and ½” - 1” (see model). Threaded connections: ½”-2” BSP (M)/(F) and 1” captive nut (see model).

Marking:

Lawton Tubes Logo, EN1254, size & PN on body.

Installation Requirements:

R001

Expiry date:

31/08/2027

Model:

90 Degree Street Elbow (EFELS prefix) EFELS010 10mm – EFELS054 54mm 90 Degree Elbow (EFEL prefix) EFEL008 8mm – EFEL108 108mm Equal Tee (EFTE prefix) EFTE008 8mm – EFTE108 108mm Reducing Tee (EFTE prefix) EFTE0151510 15mmx10mm – EFTE108108108 108mm x108mm Straight Coupling with stop (EFCP prefix) EFCP008 8mm – EFCP108 108mm Straight Slip Coupling (EFESC prefix) EFESC015 15mm - EFESC054 54mm 45 Degree Elbow (EFEL prefix) EFEL00845 8mm – EFEL10845 108mm Reducer Coupling (EFCP prefix) EFCP0108 10mmx 8mm - EFCP108108 108mm x 108mm Reducer fitting (EFRED prefix) EFRED0108 10mmx 8mm – EFRED108108 108mm x 108mm 45 Degree Street Elbow (EFELS prefix) EFELS01545 15mm - EFELS07645 76.1mm 90 Degree Long Radius Elbow (EFELLR prefix) EFELLR015 15mm - EFELLR0108 108mm Cap (EFEC prefix) EFEC008 8mm - EFEC108 108mm Crossover (EFFCO prefix) EFFCO015 15mm - EFFCO022 22mm Part Cross over (EFPCO prefix) EFPCO015 15mm - EFPCO022 22mm Long street elbow (EFELSLT prefix) EFELSLT022 22mm - EFELSLT0108 108mm

Approval Holder:

Lawton Tube Company Limited.

Company Name

Lawton Tube Company Limited.

Address

Torrington Avenue Tile Hill Coventry

Postcode

CV4 9AB

View All Listings by this Company

Range of end feed copper fittings for use with copper tube to EN 1057. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2208820

Size:

End feed: 8mm-108mm and ½” - 1” (see model). Threaded connections: ½”-2” BSP (M)/(F) and 1” captive nut (see model).

Marking:

HAILIANG, size & PN on body.

Installation Requirements:

R001

Expiry date:

31/08/2027

Model:

659811 JET REDUCER 67X28mm, 659812 JET REDUCER 67X35mm, 659813 JET REDUCER 67X42mm, 659814 JET REDUCER 67X54mm, 659815 JET REDUCER 76X35mm, 659816 JET REDUCER 76X42mm, 659817 JET REDUCER 76X54mm, 659818 JET REDUCER 76X67mm, 659819 JET REDUCER 108X42mm, 659820 JET REDUCER 108X54mm, 659821 JET REDUCER 108X67mm, 659822 JET REDUCER 108X76mm 659833 JET STRAIGHT COUPLING 67mm, 659834 JET STRAIGHT COUPLING 76mm, 659835 JET STRAIGHT COUPLING 108mm, 659838 JET REDUCED TEE 67X67X28mm, 659839 JET REDUCED TEE 67X67X35mm, 659840 JET REDUCED TEE 67X67X42mm, 659841 JET REDUCED TEE 67X67X54mm, 659842 JET REDUCED TEE 76X76X28mm, 659843 JET REDUCED TEE 76X76X35mm, 659844 JET REDUCED TEE 76X76X42mm, 659845 JET REDUCED TEE 76X76X54mm, 659846 JET REDUCED TEE 108X108X35mm, 659847 JET REDUCED TEE 108X108X54mm, 659848 JET REDUCED TEE 108X108X76mm, 659853 JET EQUAL TEE 67mm, 659854 JET EQUAL TEE 76mm, 659855 JET EQUAL TEE 108mm 659858 JET STOP END 67mm, 659859 JET STOP END 76mm, 659860 JET STOP END 108mm 659863 JET 90D ELBOW 67mm, 659864 JET 90D ELBOW 76mm, 659865 JET 90D ELBOW 108mm, 659868 JET 45D ELBOW 67mm, 659869 JET 45D ELBOW 76mm, 659870 JET45D ELBOW 108mm, 659927 JET 45D STREET ELBOW 67mm, 659928 JET 45D STREET ELBOW 76mm, 659929 JET 90D LONG RADIUS BEND 67mm, 659930 JET 90D LONG RADIUS BEND 76mm, 659931 JET 90D LONG RADIUS BEND 108mm 659873 * JET BRAZING FEMALE IRON ADAPTOR 76X3 659874 * JET BRAZING FEMALE IRON ADAPTOR 108X4 659875 * JET BRAZING MALE IRON ADAPTOR 67X2.1/2 659876 * JET BRAZING MALE IRON ADAPTOR 76X3 659877 * JET BRAZING MALE IRON ADAPTOR 108X4 659926 * JET BRAZING FEM IRON ADAPTOR 67X21.1/2

Approval Holder:

Wolseley UK

Company Name

Wolseley UK

Address

2 Kingmaker Court Warwick Technology Park Warwick

Postcode

CV34 6DY

Country

United Kingdom

Phone

01926705792

General Email

martin.lister@wolseley.co.uk

View All Listings by this Company

Manufacturer:

Zhejiang Hailiang Co Ltd

Company Name

Zhejiang Hailiang Co Ltd

Address

Diankou Zhuji Zhejiang

Country

China

General Email

View All Listings by this Company

Hydraulic block incorporating a stainless steel and copper brazed plate heat exchanger, plastic fittings and adaptors, recirculation pump and a flow adjustment valve. Maximum operating temperature: Central Heating Circuit: 90°C, Direct Hot Water Circuit: 65°C. Maximum working pressure: Central Heating Circuit: 2.5 bar, Direct Hot Water Circuit: 10 bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:

1478 Heater

Section Subtitle:

Combination boilers - accessories and components.

WRAS Approval Number:

2303054

Size:

Secondary circuit: ½” BSP (M) inlet and outlet. Primary circuit: ¾" BSP (M) Inlet and outlet.

Marking:

KD one (brand of KD Navien Co Ltd), model and made in Korea on label on body.

Installation Requirements:

R001 R008

Expiry date:

31/03/2028

Model:

NCB 700 Hydraulic blocks: 30029298 (41kW), 30029109 (52kW).

Product Images

Approval Holder:

KD Navien Co Ltd

Company Name

KD Navien Co Ltd

Address

4F Koami Bldg 22 Gukhoe daero, 76-gil Yeongdeungpo-gu Seoul, 07238

Country

Korea, Republic of

View All Listings by this Company

Manufacturer:

KD Navien Co Ltd

Company Name

KD Navien Co Ltd

Address

4F Koami Bldg 22 Gukhoe daero, 76-gil Yeongdeungpo-gu Seoul, 07238

Country

Korea, Republic of

View All Listings by this Company

Range of commercial air or liquid cooled ice making machines with water controlled via solenoid valve. Maximum working pressure 5.5 Bar COLD WATER USE

Section:

1500 Ice Making Machines

Size:

PVC lined flexible hose with ¾” bps captive nut end connections

Marking:

Manitowoc on front panel, model, operating info on label on back panel

Installation Requirements:

R001 R150 R171 R511

Expiry date:

31/01/2028

Model:

U(*)P0140A-251*, U(*)P0240A-251*, U(*)P0310A-251*, UGP0020A-251*, UGP0030A-251*, UGP0040A-251*, UGP0050A-251*, UGP0080A-251* Notes: U – U series (NEO) ice maker; UG – Sotto series ice maker (*) – D, Y or R. Dependent on ice cube size, D-Dice, Y-Half Dice, R-regular P –R290 (propane) Refrigerant 0140, 0240, 0310,0020,0030,0040,0050,0080 – Nominal ice production per day A – Air cooled; W-Water cooled 251 –Electrical configuration (220-240V/50Hz/ 1 Phase) *– Character(s) indicating customer/country specific options

Product Images

Approval Holder:

Manitowoc Ice, Inc

Company Name

Manitowoc Ice, Inc

Address

2110 S. 26 St Manitowoc WI 54220

Country

USA

View All Listings by this Company

Manufacturer:

Pentair Commercial Ice LLC

Company Name

Pentair Commercial Ice LLC

Address

5500 Wayzata Blvd. Suite 900 Golden Valley, MN

Postcode

55416

Country

United States

View All Listings by this Company