Water Meter Manifolds

Section Code 1510 :

Back To Directory Sections

#240204010

Water meter manifold assembly with gunmetal body, incorporating a servicing valve and a single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Max operating pressure 16 bar Maximum operating temperature Cold water only

Section:
1510 Water Meter Manifolds
Size:
¾ BSP (F)
Marking:
Flow arrow inlet and outlet sizes and Company logo (e.g Waterfit, WF)
Installation Requirements:
R001
Expiry date:
28/02/2029
Model:
MK8000003184

Approval Holder:
Waterfit Ltd
Company Name
Waterfit Ltd
Address
PO Box 28 293 Birmingham New Road Dudley
Postcode
DY1 4SJ
Country
West Midlands
Phone
0121 5207987
General Email
enquiries@waterfit.co.uk

View All Listings by this Company

Print This Approval


#240204028

Range of water meter housings. The 4414-WMH-20 (threaded) model has a DZR brass body and a check valve cartridge on the inlet verified by test (suitable for backflow protection against Fluid Category 2). The 4414-WMH-1 & 4414-WMH-2 (compression) models have a brass body and an approved check valve cartridge on the inlet, however, the complete product has not been fully tested to demonstrate that it provides adequate backflow protection. The compression models are for use with copper pipe (manufactured to EN 1057). Maximum operating pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
1510 Water Meter Manifolds
Size:
see model
Marking:
Eagle and flow arrow on body. The 4414-WMH-20 model is also marked CR.
Installation Requirements:
R001
Expiry date:
28/02/2029
Model:
4414-WMH-1: 15mm compression, 4414-WMH-2: 22mm compression, 4414-WMH-20: ¾” BSP (F).

Approval Holder:
SCE Technology (Ningbo) Co., Ltd
Company Name
SCE Technology (Ningbo) Co., Ltd
Address
No.32 Yuanqu Road Cha Lu Industrial Zone Ninghai Zhejiang
Country
China

View All Listings by this Company

Print This Approval


#240204061

Range of water meter housings incorporating DZR brass bodies and a check valve cartridge however, the complete product has not been fully tested to demonstrate that it provides adequate backflow protection. Maximum operating pressure 16 bar. Maximum operating temperature 85°C

Section:
1510 Water Meter Manifolds
Size:
see model
Marking:
MWM, flow arrow CR on body.
Installation Requirements:
R001
Expiry date:
28/02/2029
Model:
WBBADAPT112-15: 15mm compression, WBBADAPT112-22: 22mm compression, WBBADAPT112-F: ¾” BSP (F).

Approval Holder:
MWM Distributors Ltd
Company Name
MWM Distributors Ltd
Address
Units 52 & 53 Enfield Industrial Estate Windsor Road
Postcode
B97 6DE
Country
Redditch
Phone
+44 (0) 1527 68200
General Email
sales@mwmdistributorltd.com

View All Listings by this Company

Print This Approval


#240704032

Range of water meter manifolds incorporating an isolation valve, housed in a meter box. For use with PE80 pipe to BS EN 12201. Maximum working pressure 16 bar. Cold water use only.

Section:
1510 Water Meter Manifolds
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
25mm Push Fit 32mm Push Fit
Marking:
W and CF31 2AX moulded on lid. Talbot moulded on push fit fittings.
Installation Requirements:
R001
Expiry date:
31/07/2029
Model:
MAW7525SQ - Inline (UK) 25mm PF Single Stop Valve Meterbox SQ (525-900) MAW7532SQ - Inline (UK) 32mm PF Single Stop Valve Meterbox SQ (525-900)

Approval Holder:
Atlantic Plastics Ltd.
Company Name
Atlantic Plastics Ltd.
Address
Coytraherne Close, Brackla, Bridgend
Postcode
CF31 2AX
Country
United Kingdom
Phone
01656672628
General Email
rhodgkiss@atplas.co.uk

View All Listings by this Company
Manufacturer:
Atlantic Plastics Ltd.
Company Name
Atlantic Plastics Ltd.
Address
Coytraherne Close, Brackla, Bridgend
Postcode
CF31 2AX
Country
United Kingdom
Phone
01656672628
General Email
rhodgkiss@atplas.co.uk

View All Listings by this Company

Print This Approval


#241104025

Range of water meter manifolds with plastic bodies for use with PE80 pipe (manufactured to BS EN 12201). The inlets incorporate a spherical valve and a check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 16.0 bar. Cold water use only.

Section:
1510 Water Meter Manifolds
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
25mm & 32mm pushfit
Marking:
Atplas logo on body.
Installation Requirements:
R001 R008
Expiry date:
30/11/2029
Model:
MB57425DU Matrix. MB5743225DU Matrix. MB5743232DU Matrix. MB57432DU Matrix. MB5743225DDCV Matrix.

Approval Holder:
Atlantic Plastics Ltd.
Company Name
Atlantic Plastics Ltd.
Address
Coytraherne Close, Brackla, Bridgend
Postcode
CF31 2AX
Country
United Kingdom
Phone
01656672628
General Email
rhodgkiss@atplas.co.uk

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 5 of 8

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.