Range of brass fittings with compression connections to be used with copper pipes EN 1057. For above ground use only. Maximum working pressure 6.0 bar. Maximum operating temperature 95°C.

Section:

1140 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, metal, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250504019

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

SEE MODELS

Marking:

General Fittings logo, size on body and nut.

Installation Requirements:

R001

Expiry date:

31/05/2030

Model:

1N00.00 - Double straight fittings 1N0000H101000A - 10x10, 1N0000H121200A - 12x12, 1N0000H151500A - 15x15, 1N0000H181800A - 18x18, 1N0000H222200A - 22x22, 1N0000H282800A - 28x28, 1N0000H353500A - 35x35, 1N0000H424200A - 42x42, 1N0000H545400A - 54x54. 1N00.01 - Male straight fitting 1N0001H041500A - 1/2"x15, 1N0001H041800A - 1/2"x18, 1N0001H031000A - 3/8"x10, 1N0001H031200A - 3/8"x12, 1N0001H031500A - 3/8"x15, 1N0001H041000A - 1/2"x10, 1N0001H041200A - 1/2"x12, 1N0001H042200A - 1/2"x22, 1N0001H051500A - 3/4"x15, 1N0001H051800A - 3/4"x18, 1N0001H052200A - 3/4"x22, 1N0001H052800A - 3/4"x28, 1N0001H102200A - 1"x22, 1N0001H102800A - 1"x28, 1N0001H123500A - 1"1/4x35, 1N0001H144200A - 1"1/2x42, 1N0001H205400A - 2"x54. 1N00.02 - Female straight fitting 1N0002H031000A - 3/8"x10, 1N0002H031200A - 3/8"x12, 1N0002H031500A - 3/8"x15, 1N0002H041000A - 1/2"x10, 1N0002H041200A - 1/2"x12, 1N0002H041400A - 1/2"x14, 1N0002H041500A - 1/2"x15, 1N0002H041800A - 1/2"x18, 1N0002H042200A - 1/2"x22, 1N0002H051500A - 3/4"x15, 1N0002H051800A - 3/4"x18, 1N0002H052200A - 3/4"x22, 1N0002H102200A - 1"x22, 1N0002H102800A - 1"x28, 1N0002H144200A - 1"1/2x42, 1N0002H123500A - 1"1/4x35, 1N0002H205400A - 2"x54. 1N00.03 - Reduced straight fitting 1N0003H121000A - 12x10, 1N0003H151000A - 15x10, 1N0003H151200A - 15x12, 1N0003H181500A - 18x15, 1N0003H221500A - 22x15, 1N0003H282200A - 28x22, 1N0003H351500A - 35x15, 1N0003H352200A - 35x22. 1N00.08 - SIDE Female TEE 1N0008H041515A - 1/2"x15x15, 1N0008H042222A - 1/2"x22x22, 1N0008H052222A - 3/4"x22x22. 1N00.09 - TEE ELBOW 1N0009H151515A - 15x15x15, 1N0009H221515A - 22x15x15, 1N0009H222215A - 22x22x15, 1N0009H222222A - 22x22x22. 1N00.10 - TEE 1N0010H101010A - 10x10x10, 1N0010H121212A - 12x12x12, 1N0010H151515A - 15x15x15, 1N0010H181818A - 18x18x18, 1N0010H222222A - 22x22x22, 1N0010H282828A - 28x28x28, 1N0010H353535A - 35x35x35, 1N0010H424242A - 42x42x42, 1N0010H545454A - 54x54x54. 1N00.12 - FEMALE TEE 1N0012H120412A - 12x1/2"x12, 1N0012H150315A - 15x3/8"x15, 1N0012H150415A - 15x1/2"x15, 1N0012H180418A - 18x1/2"x18, 1N0012H180518A - 18x3/4"x18, 1N0012H220422A - 22x1/2"x22, 1N0012H220522A - 22x3/4"x22, 1N0012H280428A - 28x1/2"x28, 1N0012H280528A - 28x3/4"x28. 1N00.13 - REDUCED TEE 1N0013H121512A - 12x15x12, 1N0013H151212A - 15x12x12, 1N0013H151215A -. 15x12x15, 1N0013H151512A - 15x15x12, 1N0013H152215A - 15x22x15, 1N0013H221515A - 22x15x15, 1N0013H221522A - 22x15x22, 1N0013H222215A - 22x22x15, 1N0013H222822A - 22x28x22, 1N0013H281522A - 28x15x22, 1N0013H281528A - 28x15x28, 1N0013H282215A - 28x22x15, 1N0013H282222A - 28x22x22, 1N0013H282228A - 28x22x28, 1N0013H282815A - 28x28x15, 1N0013H282822A - 28x28x22, 1N0013H351535A - 35x15x35, 1N0013H352235A - 35x22x35, 1N0013H352835A - 35x28x35. 1N00.17 - SIDE M. TEE 1N0017H041515A - 1/2"x15x15, 1N0017H052222A - 3/4"x22x22, 1N0017H102222A - 1"x22x22, 1N0017H102828A - 1"x28x28. 1N00.20 - DOUBLE ELBOW 1N0020H101000A - 10x10, 1N0020H121200A - 12x12, 1N0020H151500A - 15x15, 1N0020H181800A - 18x18, 1N0020H222200A - 22x22, 1N0020H282800A - 28x28, 1N0020H353500A - 35x35, 1N0020H424200A - 42x42, 1N0020H545400A - 54x54. 1N00.21 - MALE ELBOW 1N0021H031000A - 3/8"x10, 1N0021H031200A - 3/8"x12, 1N0021H031500A - 3/8"x15, 1N0021H041000A - 1/2"x10, 1N0021H041200A - 1/2"x12, 1N0021H041500A - 1/2"x15, 1N0021H041800A - 1/2"x18, 1N0021H042200A - 1/2"x22, 1N0021H051200A - 3/4"x12, 1N0021H051500A - 3/4"x15, 1N0021H051800A - 3/4"x18, 1N0021H052200A - 3/4"x22, 1N0021H052800A - 3/4"x28, 1N0021H102200A - 1"x22, 1N0021H102800A - 1"x28, 1N0021H123500A - 1"1/4x35, 1N0021H144200A - 1"1/2x42, 1N0021H205400A - 2"x54. 1N00.22 - FEMALE ELBOW 1N0022H205400A - 2"X54, 1N0022H031000A - 3/8"x10, 1N0022H031200A - 3/8"x12, 1N0022H031500A - 3/8"x15, 1N0022H041000A - 1/2"x10, 1N0022H041200A - 1/2"x12, 1N0022H041400A - 1/2"x14, 1N0022H041500A - 1/2"x15, 1N0022H041800A - 1/2"x18, 1N0022H042200A - 1/2"x22, 1N0022H051200A - 3/4"x12, 1N0022H051400A - 3/4"x14, 1N0022H051500A - 3/4"x15, 1N0022H051800A - 3/4"x18, 1N0022H052200A - 3/4"x22, 1N0022H052800A - 3/4"x28, 1N0022H102200A - 1"x22, 1N0022H102800A - 1"x28, 1N0022H123500A - 1"1/4x35, 1N0022H144200A - 1"1/2x42. 1N00.23 - WALLPLATE ELBOW 1N0023H041200A - 1/2"x12, 1N0023H041500A - 1/2"x15, 1N0023H042200A - 1/2"x22, 1N0023H051500A - 3/4"x15, 1N0023H052200A - 3/4"x22. 1N00.29 - REDOUBLE ELBOW 1N0029H121000A - 12x10, 1N0029H151000A - 15x10, 1N0029H151200A - 15x12, 1N0029H221500A - 22x15, 1N0029H281500A - 28x15, 1N0029H282200A - 28x22. 1N00.30 - ADAPTER ELBOW 1N0030H151500A - 15x15. 1N00.36 - CROSS 1N0036H150000A - 15x15x15x15, 1N0036H220000A - 22x22x22x22, 1N0036H280000A - 28x28x28x28. 1N00.40 - MALE CAP 1N0040H100000A - 10, 1N0040H120000A - 12, 1N0040H150000A - 15, 1N0040H180000A - 18, 1N0040H220000A - 22, 1N0040H280000A - 28, 1N0040H350000A - 35. 1N00.43 - REPAIRING FITTING 1N0043H222200A - 22x22. 1N00.B1 - CROSS R. 1N00B1H221500A - 22x15x22x15, 1N00B1H221501A - 22x15x15x15. 1N00.B2 - MALE WALLPLATE ELBOW 1N00B2H051500A - 3/4"x15. 1N00.B8 - MALE STRAIGHT FOR RAD. 1N00B8H041500A - 1/2"x15. 1N00.B6 - DOUBLE ELBOW WITH VENT 1N00B6H222200A - 22x22. 1N00.B9 - ELBOW FOR RAD 1N00B9H041500A - 1/2"x15. Model added in July 2025: 1N00.01 - Male straight fitting 1N0001H021500A 1/4"x15

Product Images

Manufacturer:

General Fittings S.p.A

Company Name

General Fittings S.p.A

Address

Via Golgi 73/75 25064 Gussago Brescia

Country

Italy

Phone

+39 0303739017

View All Listings by this Company

Range of brass fittings with compression connections to be used with copper pipes EN 1057. For above ground use only. Maximum working pressure 6.0 bar. Maximum operating temperature 95°C.

Section:

1140 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, metal, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250504026

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Marking:

Bonfix on body. Bonfix, size & product info on compression nut.

Installation Requirements:

R001

Expiry date:

31/05/2030

Model:

Double straight fittings 82473 10 x 10 82537 12 x 12 82530 15 x 15 82851 18 x 18 82531 22 x 22 82532 28 x 28 82534 35 x 35 82535 42 x 42 82539 54 x 54 Male straight fitting 81103 3/8"x10 82543 3/8"x12 82740 3/8"x15 81113 1/2"x10 82528 1/2"x12 82741 1/2"x15 52491 1/2"x18 82529 1/2"x22 82742 3/4"x15 82492 3/4"x18 82743 3/4"x22 82556 3/4"x28 82744 1"x22 82745 1"x28 82474 5/4"x35 82548 3/2"x42 82549 2"x54 Female straight fitting 99029 3/8"x10 82586 3/8"x12 82575 3/8"x15 81217 1/2"x10 82748 1/2"x12 82581 1/2"x15 52574 1/2"x18 82577 1/2"x22 82749 3/4"x15 52750 3/4"x18 82582 3/4"x22 82585 1"x22 82583 1"x28 82475 5/4"x35 82588 3/2"x42 82589 2" x 54 Reduced straight fitting 82471 12 x 10 82538 15 x 10 82472 15 x 12 52746 18 x 15 82533 22 x 15 82536 28 x 22 82467 35 x 15 82468 35 x 22 SIDE Female TEE 82611 15 x 15 x 1/2" 82641 22 x 22 x 1/2" 82648 22 x 22 x 3/4" TEE ELBOW 82760 15 x 15 x 15 82763 22 x 15 x 15 82762 22 x 15 x 22 82761 22 x 22 x 22 TEE 82453 10x10x10 82452 12x12x12 82501 15x15x15 52871 18x18x18 82502 22x22x22 82503 28x28x28 82516 35x35x35 82517 42x42x42 82451 54x54x54 FEMALE TEE 99952 12x1/2"x12 82645 15x3/8"x15 82646 15x1/2"x15 82791 18x1/2"x18 82792 18x3/4"x18 82640 22x1/2"x22 82647 22x3/4"x22 82642 28x1/2"x28 82643 28x3/4"x28 REDUCED TEE 82454 12x15x12 82455 15x12x12 82456 15x12x15 82457 15x15x12 82504 15x22x15 82506 22x15x15 82505 22x15x22 82507 22x22x15 82519 22x28x22 82458 28x15x22 82508 28x15x28 82459 28x22x15 82513 28x22x22 82514 28x22x28 82509 28x28x15 82515 28x28x22 82476 35x15x35 82477 35x22x35 82478 35x28x35 SIDE M. TEE 82613 15x15x1/2" 82612 22x22x3/4" 82614 22x22x1" 82615 28x28x1"

DOUBLE ELBOW 82527 10x10 82526 12x12 82520 15x15 82861 18x18 82521 22x22 82522 28x28 82523 35x35 82524 42x42 82525 54x54 MALE ELBOW 82804 3/8" x 10 82701 3/8" x 12 82617 3/8" x 15 81811 1/2"x 10 82703 1/2" x 12 82700 1/2" x 15 52566 1/2" x 18 82709 1/2" x 22 82704 3/4" x 15 52862 3/4" x 18 82702 3/4" x 22 82705 3/4" x 28 82706 1 " x 22 82707 1 " x 28 82721 1"1/4x35 82722 1"1/2x42 82723 2"x54 FEMALE ELBOW 82404 3/8" x 10 82598 3/8" x 12 82605 3/8" x 15 82407 1/2" x 10 82596 1/2" x 12 82591 1/2" x 15 52863 1/2" x 18 82595 1/2" x 22 82482 3/4" x 15 52864 3/4" x 18 82592 3/4" x 22 82597 3/4" x 28 82594 1 " x 22 82593 1 " x 28 82559 1"1/4x35 82603 1"1/2x42 WALLPLATE ELBOW 52569 1/2" x 12 82570 1/2" x 15 82469 1/2" x 22 82572 3/4" x 15 82573 3/4" x 22 REDOUBLE ELBOW 82462 12 x 10 82461 15 x 10 82463 15 x 12 82464 22 x 15 82479 28 x 15 82481 28 x 22 ADAPTER ELBOW 84400 15 x 15u CROSS 82510 15 x 15 x 15 x 15 82511 22 x 22 x 22 x 22 82512 28 x 28 x 28 x 28 MALE CAP 82493 10 82494 12 82495 15 82496 22 82497 28 82498 35 CROSS R. 82518 22 x 15 x 22 x 15 82616 22 x 15 x 15 x 15 MALE WALLPLATE ELBOW 82571 3/4" x 15 MALE STRAIGHT FOR RAD. 82800 1/2""x15 DOUBLE ELBOW WITH VENT 82771 22 x 22 ELBOW FOR RAD 82790 1/2"x15

Approval Holder:

Bonfix B.V.

Company Name

Bonfix B.V.

Address

Holsteinstraat 4 8028 RT Zwolle (N1) The Netherlands

General Email

info@bonfix.nl

View All Listings by this Company

‘Flowflex,’ and ‘Opal’ ranges of brass, DZR brass, chromium plated brass, nickel plated brass compression fittings for use with copper pipe to BS EN 1057. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:

1140 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, metal, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2211366

Size:

See models.

Marking:

FLOWFLEX, Size, EN1542-2, UK or UK Made OPAL, Size, EN1254-2 CR on DZR models

Installation Requirements:

R001

Expiry date:

30/11/2027

Model:

99713 Flowflex Brass Compression Straight Coupling 10mm, 44117 Opal Brass Compression Straight Coupling 15mm, 59406 Opal Brass Compression Straight Coupling 22mm, 50808 Opal Brass Compression Straight Coupling 28mm, 57128 Flowflex Brass Compression Reducing Coupling 15 x 8mm, 93356 Flowflex Brass Compression Reducing Coupling 15 x 10mm, 75499 Flowflex Brass Compression Reducing Coupling 22 x 15mm, 44694 Flowflex Brass Compression Reducing Coupling 28 x 22mm, 46376 Opal Brass Compression Repair Coupling 15 x 100mm, 91660 Opal Brass Compression Male Adaptor 15mm x ½”, 60156 Opal Brass Compression Male Adaptor 22mm x ¾”, 12167 Opal Brass Compression Male Adaptor 22mm x 1”, 85952 Opal Brass Compression Male Adaptor 28mm x 1”, 39623 Opal Brass Compression Female Adaptor 15mm x ½”, 37759 Opal Brass Compression Female Adaptor 22mm x ¾”, 20725 Opal Brass Compression Female Adaptor 22mm x 1”, 14922 Opal Brass Compression Female Adaptor 28mm x 1”, 75114 Opal Brass Compression Straight Tap Connector 15mm x ½”, 92409 Opal Brass Compression Straight Tap Connector 22mm x ¾”, 58277 Opal Brass Compression Tank Connector 15mm, 54014 Opal Brass Compression Tank Connector 22mm, 78520 Opal Brass Compression Tank Connector 28mm, 43650 Flowflex DZR Brass Compression Three Piece Reducing Set 15 x 10mm, 21910 Flowflex DZR Brass Compression Three Piece Reducing Set 22 x 15mm, 25902 Flowflex Brass Compression Stop End 10mm, 63232 Opal Brass Compression Stop End 15mm, 28223 Opal Brass Compression Stop End 22mm, 42207 Opal Brass Compression Stop End 28mm, 47899 Flowflex Brass Compression Equal Elbow 10mm, 23847 Opal Brass Compression Equal Elbow 15mm, 19605 Opal Brass Compression Equal Elbow 22mm, 33123 Opal Brass Compression Equal Elbow 28mm, 64668 Opal Brass Compression Male Elbow 15mm x ½”, 33647 Opal Brass Compression Male Elbow 22mm x ¾”, 26618 Opal Brass Compression Female Elbow 15mm x ½”, 48823 Opal Brass Compression Female Elbow 22mm x ¾”, 29554 Opal Brass Compression Wallplate Elbow 15mm x ½”, 46354 Opal Brass Compression Wallplate Elbow 22mm x ¾”, 65566 Opal Brass Compression Bent Tap Connector 15mm x ½”, 17824 Opal Brass Compression Bent Tap Connector 22mm x ¾”, 91205 Flowflex Brass Compression Equal Tee 10mm, 22749 Opal Brass Compression Equal Tee 15mm, 67294 Opal Brass Compression Equal Tee 22mm, 92176 Opal Brass Compression Equal Tee 28mm, 98758 Opal Brass Compression Reduced Branch Tee 22 x 22 x 15mm, 79889 Opal Brass Compression Reduced Branch Tee 28 x 28 x 15mm, 81926 Opal Brass Compression Reduced Branch Tee 28 x 28 x 22mm, 27062 Opal Brass Compression Reduced End Tee 22 x 15 x 22mm, 84560 Opal Brass Compression Reduced Branch and End Tee 22 x 15 x 15mm.

Approval Holder:

Toolstation Ltd.

Company Name

Toolstation Ltd.

Address

Travis Perkins PLC Ryehill House Rye Hill Close Lodge Farm Industrial Estate Northampton

Postcode

NN5 7UA

Country

United Kingdom

Phone

07392109053

General Email

benjamin.cockerill@travisperkins.co.uk

View All Listings by this Company

Manufacturer:

Flowflex Components Ltd.

Company Name

Flowflex Components Ltd.

Address

Samuel Blaser Works Dew Pond Lane Tongue Lane Industrial Estate Buxton

Postcode

SK17 7LR

Country

United Kingdom

Phone

+44 1298 77211 Fax: 01298 72362 Telex: 666482

General Email

daniel.jones@fowflex.com

View All Listings by this Company

Manufacturer:

Flowflex Components Ltd.

Company Name

Flowflex Components Ltd.

Address

Samuel Blaser Works Dew Pond Lane Tongue Lane Industrial Estate Buxton

Postcode

SK17 7LR

Country

United Kingdom

Phone

+44 1298 77211 Fax: 01298 72362 Telex: 666482

General Email

daniel.jones@fowflex.com

View All Listings by this Company

Range of compression fittings with brass, chrome plated brass bodies. COM RANGE OF COM For use with copper pipe (EN 1057) Maximum operating pressure 16 bar. Maximum operating temperature 85°C

Section:

1140 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, metal, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250604024

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

8MM – 54MM & ¼” – 2”

Marking:

Lawton & size on compression nut.

Installation Requirements:

R001

Expiry date:

30/06/2030

Model:

Bent Tap Connector Compression COMBTC0151/2 – 15mm x ½” Coupling Compression Chrome COMCP015CP – 15mm COMCP022CP – 22mm COMCP028CP – 28mm COMCP035CP – 35mm COMCP042CP – 42mm COMCP054CP – 54mm Coupling Compression COMCP008 – 08mm COMCP010 – 10mm COMCP015 – 15mm COMCP022 – 22mm COMCP028 – 28mm COMCP035 – 35mm COMCP042 – 42mm COMCP054 – 54mm Reducer Coupler COMCP01008 – 10mm x 08mm COMCP01508 – 15mm x 08mm COMCP01510 – 15mm x 10mm COMCP01512 – 15mm x 12mm COMCP02215 – 22mm x 15mm COMCP02815 – 28mm x 15mm COMCP02822 – 28mm x 22mm COMCP03522 – 35mm x 22mm COMCP03528 – 35mm x 28mm 90 Degree Elbow Compression COMEL008 – 08mm COMEL010 – 10mm COMEL015 – 15mm COMEL022 – 22mm COMEL028 – 28mm COMEL035 – 35mm COMEL042 – 42mm COMEL054 – 54mm 45 Degree Elbow Compression COMEL01545 – 15mm COMEL02245 – 22mm COMEL02845 – 28mm 90 Degree Elbow Compression Chrome COMEL015CP – 15mm COMEL022CP – 22mm COMEL028CP – 28mm COMEL035CP – 35mm COMEL042CP – 42mm COMEL054CP – 54mm Equal Tee Compression COMTE008 – 08mm COMTE010 – 10mm COMTE015 – 15mm COMTE022 – 22mm COMTE028 – 28mm COMTE035 – 35mm COMTE042 – 42mm COMTE054 – 54mm Equal Tee Compression Chrome COMTE015CP – 15mm COMTE022CP – 22mm COMTE028CP – 28mm COMTE035CP – 35mm COMTE042CP – 42mm COMTE054CP – 54mm Cross Tee Compression COMCR015 – 15mm COMCR022 – 22mm COMCR028 – 28mm Male Iron Coupling Compression COMCPMI0081/4 – 08mm x ¼” COMCPMI0101/4 – 10mm x ¼” COMCPMI0103/8 – 10mm x 3/8” COMCPMI0151/4 – 15mm x ¼” COMCPMI0153/8 – 15mm x 3/8” COMCPMI0151/2 – 15mm x ½” COMCPMI0153/4 – 15mm x ¾” COMCPMI0221/2 – 22mm x ½” COMCPMI0223/4 – 22mm x ¾” COMCPMI0221 – 22mm x 1 “ COMCPMI0283/4 – 28mm x ¾” COMCPMI0281 – 28mm x 1” COMCPMI03511/4 – 35mm x 1 ¼” COMCPMI04211/2 – 42mm x 1 ½” COMCPMI0542 – 54mm x 2” Male Iron Coupling Chrome Compression COMCPMI0151/2CP – 15mm x ½” COMCPMI0223/4CP – 22mm x ¾” Female Iron Coupling Compression COMCPFI0101/4 – 10mm x ¼” COMCPFI0151/4 – 15mm x ¼” COMCPFI051/2 – 15mm x ½” COMCPFI0153/4 – 15mm x ¾” COMCPFI0221/2 – 22mm x ½” COMCPFI0223/4 – 22mm x ¾” COMCPFI0221 – 22mm x 1 “ COMCPFI0281 – 28mm x 1” COMCPFI03511/4 – 35mm x 1 ¼” COMCPFI04211/2 – 42mm x 1 ½” COMCPFI0542 – 54mm x 2” Female Iron Coupling Chrome Compression COMCPFI0151/2CP – 15mm x ½” COMCPFI0223/4CP – 22mm x ¾” Female Iron Elbow Chrome Compression COMELFI0151/2CP – 15mm x ½” COMELFI0223/4CP – 22mm ¾” COMELFI0221CP – 22mm x 1” Male Iron Elbow Compression COMELMI0151/2 – 15mm x ½” COMELMI0153/4 – 15mm x ¾” COMELMI0223/4 – 22mm x ¾” COMELMI0281 – 28mm x 1” COMELMI03511/4 – 35mm x 1 ¼” Female Iron Elbow Compression COMELFI0151/2 – 15mm x ½” COMELFI0153/4 – 15mm x ¾” COMELFI0221/2 – 22mm x ½” COMELFI0223/4 – 22mm x ¾” COMELFI0221 – 22mm 1 “ COMELFI0281 – 28mm x 1” COMELFI03511/4 – 35mm x 1 ¼” COMELFI04211/2 – 42mm x 1 ½” COMELFI0542 – 54mm x 2” Male Iron Elbow Chrome Compression COMELMI0151/2CP – 15mm x ½” COMELMI0223/4CP – 22mm x ¾” Wallplate Elbow Compression COMELWL0151/2 – 15mm x ½” COMELWL0223/4 – 22mm x ¾” Wallplate Elbow Chrome Compression COMELWL0151/2CP – 15mm x ½” Male Iron Coupler Taper Thread COMTTCPMI0151/2 – 15mm x ½” COMTTCPMI0223/4 – 22mm x ¾” COMTTCPMI0281 – 28mm x 1” Male Coupler Ext Taper Thread COMETTCPMI0223/4 – 22mm x ¾” Crossover Compression COMC022 – 22mm End Cap Compression COMEC008 – 08mm COMEC010 – 10mm COMEC015 – 15mm COMEC022 – 22mm COMEC028 – 28mm COMEC035 – 35mm COMEC042 – 42mm COMEC054 – 54mm End Cap Compression Chrome Plated COMEC015CP – 15mm COMEC022CP – 22mm COMEC028CP – 28mm COMEC035CP – 35mm COMEC042CP – 42mm COMEC054CP – 54mm Red Tee Compression COMTE0151522 – 15mm x 15mm x 22mm COMTE0221515 – 22mm x 15mm x 15mm COMTE0221522 – 22mm x 15mm x 22mm COMTE0222215 – 22mm x 22mm x 15mm COMTE0281528 – 28mm x 15mm x 28mm COMTE0282228 – 28mm x 22mm x 28mm COMTE0282815 – 28mm x 28mm x 15mm COMTE0282822 – 28mm x 28mm x 22mm Female Tee Compression COMTEFI015151/2 – 15mm x 15mm x ½” COMTEFI022221/2 – 22mm x 22mm x ½” COMTEFI022223/4 – 22mm x 22mm x ¾” COMTEFI028281 – 28mm x 28mm x 1” Red Tee Chrome Compression COMTE0151522CP – 15mm x 15mm x 22mm COMTE0221515CP – 22mm x 15mm x 15mm COMTE0222215CP – 22mm x 22mm x 15mm COMTE0222228CP – 22mm x 22mm x 28mm Reducing Sets Compression COMRS0108 – 10mm x 08mm COMRS0158 – 15mm x 08mm COMRS01510 – 15mm x 10mm COMRS02215 – 22mm x 15mm COMRS02822 – 28mm x 22mm COMRS03515 – 35mm x 15mm COMRS03522 – 35mm x 22mm COMRS03528 – 35mm x 28mm COMRS04215 – 42mm x 15mm COMRS04222 – 42mm x 22mm COMRS04228 – 42mm x 28mm COMRS04235 – 42mm x 35mm COMRS05422 – 54mm x 22mm COMRS05428 – 54mm x 28mm COMRS05435 – 54mm x 35mm COMRS05442 – 54mm x 42mm Tank Connector Compression COMTC015 – 15mm COMTC022 – 22mm COMTC028 – 28mm COMTC035 – 35mm COMTC042 – 42mm COMTC054 – 54mm Repair Coupling Compression COMRCP015 – 15mm COMRCP022 – 22mm Straight Tap Connect Compression COMSTC0151/2 – 15mm x ½” COMSTC0153/4 – 15mm x ¾” Red Elbow Compression COMREL02215 – 22mm x 15mm

Product Images

Approval Holder:

Lawton Tube Company Limited.

Company Name

Lawton Tube Company Limited.

Address

Torrington Avenue Tile Hill Coventry

Postcode

CV4 9AB

View All Listings by this Company

Range of compression fittings with brass, chrome plated brass bodies. For use with copper pipe (EN 1057) Maximum operating pressure 16 bar. Maximum operating temperature 85°C

Section:

1140 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, metal, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250604034

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15MM– 54MM & 1/2” – 1”

Marking:

Lawton & size on compression nut.

Installation Requirements:

R001

Expiry date:

30/06/2030

Model:

Coupling Compression Chrome COMCP015CP – 15mm COMCP022CP – 22mm COMCP028CP – 28mm COMCP035CP – 35mm COMCP042CP – 42mm COMCP054CP – 54mm Coupling Compression SB-COMCP015 – 15mm SB-COMCP022 – 22mm SB-COMCP028 – 28mm SB-COMCP035 – 35mm SB-COMCP042 – 42mm SB-COMCP054 – 54mm 90 Degree Elbow Compression SB-COMEL015 – 15mm SB-COMEL022 – 22mm SB-COMEL028 – 28mm SB-COMEL035 – 35mm SB-COMEL042 – 42mm SB-COMEL054 – 54mm Equal Tee Compression SB-COMTE015 – 15mm SB-COMTE022 – 22mm SB-COMTE028 – 28mm SB-OMTE035 – 35mm SB-COMTE042 – 42mm SB-COMTE054 – 54mm Male Iron Coupling Compression SB-COMCPMI0153/8 – 15mm x 3/8” SB-COMCPMI0151/2 – 15mm x ½” SB-COMCPMI0221/2 – 22mm x ½” SB-COMCPMI0223/4 – 22mm x ¾” SB-COMCPMI0221 – 22mm x 1 “ SB-COMCPMI0281 – 28mm x 1” Female Iron Coupling Chrome Compression SB-COMCPFI0151/2CP – 15mm x ½” SB-COMCPFI0223/4CP – 22mm x ¾” End Cap Compression SB-COMEC015 – 15mm SB-COMEC022 – 22mm

Approval Holder:

Smith Brothers Stores Limited

Company Name

Smith Brothers Stores Limited

Address

Unit V2 Winchester Avenue, Blaby, Leicester

Postcode

LE8 4GZ

Phone

0116 222 7330

General Email

kel.phillips@sbs.co.uk

View All Listings by this Company

Manufacturer:

The Lawton Tube Company Ltd.

Company Name

The Lawton Tube Company Ltd.

Address

Torrington Avenue, Tile Hill, Coventry

Postcode

CV4 9AB

Phone

+44 24 7646 6203 or 024 7646 6203

General Email

View All Listings by this Company

Manufacturer:

The Lawton Tube Company Ltd.

Company Name

The Lawton Tube Company Ltd.

Address

Torrington Avenue, Tile Hill, Coventry

Postcode

CV4 9AB

Phone

+44 24 7646 6203 or 024 7646 6203

General Email

View All Listings by this Company