JG Speedfit range of push-fit fittings and manifolds for use with Polybutylene Barrier Pipe (manufactured to BS EN 7291-2:2010 ) and PEX Barrier Pipe (manufactured to BS EN 7291-3:2010) and Copper Pipe (manufactured to BS EN1057:). Operating parameters: 12.5 bar@20°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2312020

Note:

R008 to applies to models 15PWB and CM551516W

Size:

10mm – 22mm push-fit. 5/8” push-fit & ¾” push-fit. ½” & ¾” BSP.

Marking:

John Guest logo and size on body

Installation Requirements:

R001 R008

Expiry date:

31/12/2028

Model:

FEMALE COUPLER TAP CONNECTOR BSP THREAD PSE3210W 10mm x 1/2" BSP FEMALE PSE3201W 15mm x 1/2" BSP FEMALE PSE3203W 15mm x 3/4" BSP FEMALE PSE3202W 22mm x 3/4" BSP FEMALE STOP END PSE4610W 10mm PSE4615W 15mm PSE4622W 22mm PSE4628W 28mm 4 WAY MANIFOLD SFM512210E 22 x 10mm 4 PORT RAIL MANIFOLD SFM522210E 22mm x 10mm SFM522215E 22mm x 15mm BACK PLATE ELBOW 15PWB: 15mm x 1/2" BSP BULKHEAD ELBOW CM551516W: 15mm x 3/4" BSP CONVERSION CONNECTOR: NC471: ½” ID (Imperial) x 15mm Push-fit NC2324: ¾” ID (Imperial) x 22mm Push-fit

Approval Holder:

Reliance Worldwide Corporation (UK)

Company Name

Reliance Worldwide Corporation (UK)

Address

Horton Road, West Drayton

Postcode

UB7 8JL

Country

United Kingdom

Phone

+44 7730 052060

General Email

PETER.LANCASTER@RWC.COM

View All Listings by this Company

Manufacturer:

Reliance Worldwide Corporation (UK)

Company Name

Reliance Worldwide Corporation (UK)

Address

Horton Road, West Drayton

Postcode

UB7 8JL

Country

United Kingdom

Phone

+44 7730 052060

General Email

PETER.LANCASTER@RWC.COM

View All Listings by this Company

‘SharkBite’ range of brass push fit fittings incorporating an EPDM ‘O’-ring. For use with the following pipes: JG Speedfit Layflat Polybutylene Barrier Pipe (JG BPB pipe manufactured to BS EN 7291-2:2010), 'BPEX' Barrier Pipe (JG BPEX pipe manufactured to BS EN 7291-3:2010), Polybutylene barrier pipe (manufactured to BS EN 7291-2:2010), PEX barrier pipe (manufactured to BS EN 7291-3:2010) and Copper pipe (manufactured to BS EN1057:2006). Maximum working pressures and operating temperatures: When used with Polybutylene barrier pipes (manufactured to BS EN 7291-2:2010) and PEX barrier pipes (manufactured to BS EN 7291-3:2010): 12.5 bar, cold water use only. 6.0 bar @ 95°C. When used with copper pipe (manufactured to BS EN1057:2006): 10mm sizes: Maximum working pressure 16.0 bar. Cold water use only. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C. 15-22mm sizes: Maximum working pressure 20.0 bar. Cold water use only. Maximum working pressure 16.0 bar. Maximum operating temperature 95°C. 28mm size added April 2024: Maximum working pressure 20.0 bar. Cold water use only. Maximum working pressure 16.0 bar. Maximum operating temperature 95°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240204043

Size:

See models.

Marking:

Fittings: Sharkbite (brand of Reliance Worldwide Corporation (UK) Ltd.), Sharkbite logo, CR, size and SXXXX (where XXXX = date of manufacture WWYY). Pipe: John Guest logo (brand of Reliance Worldwide Corporation (UK) Ltd.), material type, class, size, pressure, temperature and means of identification including date of manufacture (WWYY/xxxx/xxxx). Pipe inserts: John Guest logo (brand of Reliance Worldwide Corporation (UK) Ltd.).

Installation Requirements:

R001

Expiry date:

28/02/2029

Model:

SHARKBITE EQUAL STRAIGHT COUPLINGS: SB0110: 10mm SB0115: 15mm SB0122: 22mm SB0128: 28mm SHARKBITE REDUCING STRAIGHT COUPLING: SB011510: 15mm x 10mm SB012215: 22mm x 15mm SB012822: 28mm x 22mm SHARKBITE SLIP COUPLING: SB0115S: 15mm SB0122S: 22mm SB0128S: 28mm SHARKBITE 90° EQUAL ELBOW: SB0210: 10mm SB0215: 15mm SB0222: 22mm SB0228: 28mm SHARKBITE 45° EQUAL ELBOW: SB0515: 15mm SB0522: 22mm SB0528: 28mm SHARKBITE 90° STREET ELBOW: SB0215ST: 15mm SB0222ST: 22mm SB0228ST: 28mm SHARKBITE 45° STREET ELBOW: SB0515ST: 15mm SB0522ST: 22mm SB0528ST: 28mm SHARKBITE 90° MALE ELBOW: SB121515M: 15mm SB122220M: 22mm SHARKBITE 90° FEMALE ELBOW: SB121515F: 15mm x 1/2” BSP SHARKBITE 90° FEMALE ELBOW WITH BACK PLATE: SB121515FBP: 15mm x 1/2” BSP SHARKBITE EQUAL TEE: SB0310: 10mm SB0315: 15mm SB0322: 22mm SB0328: 28mm SHARKBITE SLIP TEE: SB0315S: 15mm SB0322S: 22mm SB0328S: 28mm SHARKBITE FEMALE BRANCH TEE: SB03151515F: 15mm x 15mm x 1/2” BSP SHARKBITE REDUCED BRANCH TEE: SB03222210: 22mm x 22mm x 10mm SB03222215: 22mm x 22mm x 15mm SB03282815: 28mm x 28mm x 15mm SB03282822: 28mm x 28mm x 22mm SHARKBITE REDUCED RUN TEE: SB03221522: 22mm x 15mm x 22mm SHARKBITE REDUCED RUN AND BRANCH TEE: SB03221515: 22mm x 15mm x 15mm SB03282222: 28mm x 22mm x 22mm SHARKBITE MALE CONNECTOR TAPERED THREAD: SB111515MT: 15mm x 1/2” BSPT SB112220MT: 22mm x 3/4” BSPT SB112825MT: 28mm x 1” BSPT SHARKBITE MALE CONNECTOR PARALLEL THREAD: SB111515MP: 15mm x 1/2” BSP SB112220MP: 22mm x 3/4” BSP SB112825MP: 28mm x 1” BSP SHARKBITE MALE TANK CONNECTOR PARALLEL THREAD: SB111515MTC: 15mm x 1/2” BSP SB112220MTC: 22mm x 3/4” BSP SHARKBITE FEMALE CONNECTOR PARALLEL THREAD: SB111515F: 15mm x 1/2” BSP SB112220F: 22mm x 3/4” BSP SB112825F: 28mm x 1” BSP SHARKBITE TAP CONNECTORS: SB141515: 15mm x 1/2” BSP SB142220: 22mm x 3/4” BSP SHARKBITE TAP CONNECTOR ELBOW: SB141515E: 15mm x 1/2” BSP SHARKBITE END STOP: SB0410: 10mm SB0415: 15mm SB0422: 22mm SB0428: 28mm SHARKBITE STRAIGHT REDUCING TAILS: SB211510: 15mm x 10mm SB212215: 22mm x 15mm SB212815: 28mm x 15mm SB212822: 28mm x 22mm SHARKBITE SINGLE BRANCH MANIFOLD TEE: SB01221022ST: 22mm x 22mm x 10mm SHARKBITE DOUBLE BRANCH MANIFOLD TEE: SB0122101022ST: 22mm x 22mm x 10mm x 10mm

PIPE INSERTS: TSM10N: 10mm TSM15N: 15mm TSM22N: 22mm TSM28N: 28mm WHITE POLYBUTYLENE BARRIER PIPE (COILS ONLY): 10BPB-25C: 10mm x 25M COIL LAYFLAT POLYBUTYLENE BARRIER PIPE 10BPB-50C: 10mm x 50M COIL LAYFLAT POLYBUTYLENE BARRIER PIPE 10BPB-100C: 10mm x 100M COIL LAYFLAT POLYBUTYLENE BARRIER PIPE 15BPB-25C: 15mm x 25M COIL LAYFLAT POLYBUTYLENE BARRIER PIPE 15BPB-50C: 15mm x 50M COIL LAYFLAT POLYBUTYLENE BARRIER PIPE 15BPB-85C: 15mm x 85M COIL LAYFLAT POLYBUTYLENE BARRIER PIPE 15BPB-100C: 15mm x 100M COIL LAYFLAT POLYBUTYLENE BARRIER PIPE 15BPB-120C: 15mm x 120M COIL LAYFLAT POLYBUTYLENE BARRIER PIPE 15BPB-150C: 15mm x 150M COIL LAYFLAT POLYBUTYLENE BARRIER PIPE 15BPB-300C: 15mm x 300M COIL LAYFLAT POLYBUTYLENE BARRIER PIPE 22BPB-25C: 22mm x 25M COIL LAYFLAT POLYBUTYLENE BARRIER PIPE 22BPB-50C: 22mm x 50M COIL LAYFLAT POLYBUTYLENE BARRIER PIPE 28BPB-50C: 28mm x 50M COIL LAYFLAT POLYBUTYLENE BARRIER PIPE WHITE PEX BARRIER PIPE (COILS): 10BPEX-25C: 10mm x 25M COIL WHITE PEX BARRIER PIPE 10BPEX-50C: 10mm x 50M COIL WHITE PEX BARRIER PIPE 10BPEX-100C: 10mm x 100M COIL WHITE PEX BARRIER PIPE 15BPEX-25C: 15mm x 25M COIL WHITE PEX BARRIER PIPE 15BPEX-50C: 15mm x 50M COIL WHITE PEX BARRIER PIPE 15BPEX-100C: 15mm x 100M COIL WHITE PEX BARRIER PIPE 15BPEX-120C: 15mm x 120M COIL WHITE PEX BARRIER PIPE 15BPEX-150C: 15mm x 150M COIL WHITE PEX BARRIER PIPE 22BPEX-25C: 22mm x 25M COIL WHITE PEX BARRIER PIPE 22BPEX-50C: 22mm x 50M COIL WHITE PEX BARRIER PIPE WHITE PEX BARRIER PIPE (LENGTHS): 15BPEX-20X2L: 15mm x 2M LENGTHS WHITE PEX BARRIER PIPE 15BPEX-20X3L: 15mm x 3M LENGTHS WHITE PEX BARRIER PIPE 15BPEX-20X6L: 15mm x 6M LENGTHS WHITE PEX BARRIER PIPE 22BPEX-20X2L: 22mm x 2M LENGTHS WHITE PEX BARRIER PIPE 22BPEX-20X3L: 22mm x 3M LENGTHS WHITE PEX BARRIER PIPE 22BPEX-20X6L: 22mm x 6M LENGTHS WHITE PEX BARRIER PIPE 28BPEX-10X3L: 28mm x 3M LENGTHS WHITE PEX BARRIER PIPE 28BPEX-10X6L: 28mm x 6M LENGTHS WHITE PEX BARRIER PIPE

Approval Holder:

Reliance Worldwide Corporation (UK)

Company Name

Reliance Worldwide Corporation (UK)

Address

Horton Road, West Drayton

Postcode

UB7 8JL

Country

United Kingdom

Phone

+44 7730 052060

General Email

PETER.LANCASTER@RWC.COM

View All Listings by this Company

Range of polypropylene push-fit fittings and inserts for use with PE80 MDPE pipe (manufactured to BS EN 12201). For above and below ground use. Maximum working pressure 16.0 bar. Cold water use only.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

260202003

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

32mm models only for use with PE100 MDPE pipe

Size:

See models below

Marking:

PN, JG logo and size on body

Installation Requirements:

R001

Expiry date:

28/02/2031

Model:

UG101B - 20mm x 1/2" BSP MALE ADAPTOR UG102B - 25mm x 3/4" BSP MALE ADAPTOR UG103B - 32mm x 1" BSPT MALE ADAPTOR UG104B - 32mm x 1.1/2" BSPT MALE ADAPTOR UG201B - 20mm EQUAL TEE UG202B - 25mm EQUAL TEE UG203B - 32mm EQUAL TEE UG232AB - 32mm x 25mm REDUCING TEE UG222025B - 20mm x 25mm STEM ELBOW UG222525B - 25mm x 25mm STEM ELBOW UG223232B - 32mm x 32mm STEM ELBOW UG301B - 20mm EQUAL ELBOW UG302B - 25mm EQUAL ELBOW UG303B - 32mm EQUAL ELBOW UG401B - 20mm EQUAL STRAIGHT CONNECTOR UG402B - 25mm EQUAL STRAIGHT CONNECTOR UG403B - 32mm EQUAL STRAIGHT CONNECTOR UG4501B - 20 x 1/2" FEMALE ADAPTOR UG4502B - 25 X 3/4" FEMALE ADAPTOR UG4620B - 20mm STOP END UG4625B - 25mm STOP END UG501B - 25mm x 20mm REDUCING STRAIGHT CONNECTOR UG502B - 32mm x 25mm REDUCING STRAIGHT CONNECTOR UG801E - 20mm PLUG UG802E - 25mm PLUG UG803E - 32mm PLUG UGPWB2014 - 20mm x 1/2" BACK PLATE ELBOW UGPWB2514 - 25mm x 1/2" BACK PLATE ELBOW UGPWB2516 - 25mm x 3/4" BACK PLATE ELBOW UTS147-DB - 20mm PIPE INSERT UTS197-DB - 25mm PIPE INSERT UTS251-DB - 32mm PIPE INSERT

Manufacturer:

Reliance Worldwide Corporation (UK)

Company Name

Reliance Worldwide Corporation (UK)

Address

Horton Road, West Drayton

Postcode

UB7 8JL

Country

United Kingdom

Phone

+44 7730 052060

View All Listings by this Company

RWC range of polypropolene fittings for use with PE pipe (manufactured to EN 12201). Maximum working pressure 16 bar. Cold water use.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2207410

Note:

For above and below ground use

Size:

20mm – 63mm.

Marking:

JG logo, John Guest, size & PN on compression nut.

Installation Requirements:

R001

Expiry date:

31/07/2027

Model:

Reducing Tee (Branch Reduced) RWC UGCF30A252520: JG MDPE Compression Red Tee - 25 x 25 x 20mm UGCF30A323225: JG MDPE Compression Red Tee - 32 x 32 x 25mm UGCF30A404032: JG MDPE Compression Red Tee - 40 x 40 x 32mm UGCF30A505025: JG MDPE Compression Red Tee - 50 x 50 x 25mm UGCF30A505032: JG MDPE Compression Red Tee - 50 x 50 x 32mm UGCF30A505040: JG MDPE Compression Red Tee - 50 x 50 x 40mm UGCF30A636332: JG MDPE Compression Red Tee - 63 x 63 x 32mm UGCF30A636340: JG MDPE Compression Red Tee - 63 x 63 x 40mm UGCF30A636350: JG MDPE Compression Red Tee - 63 x 63 x 50mm Male Thread Adaptor RWC UGCF45M2012BSP: JG MDPE Compression Male Adpt - 20mm x 1/2" UGCF45M2034BSP: JG MDPE Compression Male Adpt - 20mm x 3/4" UGCF45M2512BSP: JG MDPE Compression Male Adpt - 25mm x 1/2" UGCF45M2534BSP: JG MDPE Compression Male Adpt - 25mm x 3/4" UGCF45M251BSP: JG MDPE Compression Male Adpt - 25mm x 1" UGCF45M3234BSP: JG MDPE Compression Male Adpt - 32mm x 3/4" UGCF45M321BSP: JG MDPE Compression Male Adpt - 32mm x 1" UGCF45M32114BSP: JG MDPE Compression Male Adpt - 32mm x 1-1/4" UGCF45M32112BSP: JG MDPE Compression Male Adpt - 32mm x 1-1/2" UGCF45M401BSP: JG MDPE Compression Male Adpt - 40mm x 1" UGCF45M40114BSP: JG MDPE Compression Male Adpt - 40mm x 1-1/4" UGCF45M40112BSP: JG MDPE Compression Male Adpt - 40mm x 1-1/2" UGCF45M50112BSP: JG MDPE Compression Male Adpt - 50mm x 1-1/2" UGCF45M502BSP: JG MDPE Compression Male Adpt - 50mm x 2" UGCF45M63112BSP: JG MDPE Compression Male Adpt - 63mm x 1-1/2" UGCF45M632BSP: JG MDPE Compression Male Adpt - 63mm x 2" Female Threaded Branch Tee RWC UGCF58F202012BSP: JG MDPE Compression Fem Tee - 20 x 20 x 1/2" UGCF58F202034BSP: JG MDPE Compression Fem Tee - 20 x 20 x 3/4" UGCF58F252512BSP: JG MDPE Compression Fem Tee - 25 x 25 x 1/2" UGCF58F252534BSP: JG MDPE Compression Fem Tee - 25 x 25 x 3/4" UGCF58F323234BSP: JG MDPE Compression Fem Tee - 32 x 32 x 3/4" UGCF58F32321BSP: JG MDPE Compression Fem Tee - 32 x 32 x 1" UGCF58F4040114BSP: JG MDPE Compression Fem Tee - 40 x 40 x 1-1/4" UGCF58F4040112BSP: JG MDPE Compression Fem Tee - 40 x 40 x 1-1/2" UGCF58F5050112BSP: JG MDPE Compression Fem Tee - 50 x 50 x 1-1/2" UGCF58F50502BSP: JG MDPE Compression Fem Tee - 50 x 50 x 2" UGCF58F63632BSP: JG MDPE Compression Fem Tee - 63 x 63 x 2" Female Thread Adaptor RWC UGCF45F2012BSP: JG MDPE Compression Female Adpt - 20mm x 1/2" UGCF45F2034BSP: JG MDPE Compression Female Adpt - 20mm x 3/4" UGCF45F2512BSP: JG MDPE Compression Female Adpt - 25mm x 1/2" UGCF45F2534BSP: JG MDPE Compression Female Adpt - 25mm x 3/4" UGCF45F251BSP: JG MDPE Compression Female Adpt - 25mm x 1" UGCF45F3234BSP: JG MDPE Compression Female Adpt - 32mm x 3/4" UGCF45F321BSP: JG MDPE Compression Female Adpt - 32mm x 1" UGCF45F32114BSP: JG MDPE Compression Female Adpt - 32mm x 1-1/4" UGCF45F32112BSP: JG MDPE Compression Female Adpt - 32mm x 1-1/2" UGCF45F401BSP: JG MDPE Compression Female Adpt - 40mm x 1" UGCF45F40114BSP: JG MDPE Compression Female Adpt - 40mm x 1-1/4" UGCF45F40112BSP: JG MDPE Compression Female Adpt - 40mm x 1-1/2" UGCF45F50112BSP: JG MDPE Compression Female Adpt - 50mm x 1-1/2" UGCF45F502BSP: JG MDPE Compression Female Adpt - 50mm x 2" UGCF45F63112BSP: JG MDPE Compression Female Adpt - 63mm x 1-1/2" UGCF45F632BSP: JG MDPE Compression Female Adpt - 63mm x 2" Stop End RWC UGCF4620: JG MDPE Compression Stop End - 20mm UGCF4625: JG MDPE Compression Stop End - 25mm UGCF4632: JG MDPE Compression Stop End - 32mm UGCF4640: JG MDPE Compression Stop End - 40mm UGCF4650: JG MDPE Compression Stop End - 50mm UGCF4663: JG MDPE Compression Stop End - 63mm Straight Coupling RWC UGCF0420: JG MDPE Compression Straight Coupling - 20mm UGCF0425: JG MDPE Compression Straight Coupling - 25mm UGCF0432: JG MDPE Compression Straight Coupling - 32mm UGCF0440: JG MDPE Compression Straight Coupling - 40mm UGCF0450: JG MDPE Compression Straight Coupling - 50mm UGCF0463: JG MDPE Compression Straight Coupling - 63mm Reducing Coupling RWC UGCF202520: JG MDPE Compression Red Coupling - 25 x 20mm UGCF203220: JG MDPE Compression Red Coupling - 32 x 20mm UGCF203225: JG MDPE Compression Red Coupling - 32 x 25mm UGCF204025: JG MDPE Compression Red Coupling - 40 x 25mm UGCF204032: JG MDPE Compression Red Coupling - 40 x 32mm UGCF205025: JG MDPE Compression Red Coupling - 50 x 25mm UGCF205032: JG MDPE Compression Red Coupling - 50 x 32mm UGCF205040: JG MDPE Compression Red Coupling - 50 x 40mm UGCF206332: JG MDPE Compression Red Coupling - 63 x 32mm UGCF206340: JG MDPE Compression Red Coupling - 63 x 40mm UGCF206350: JG MDPE Compression Red Coupling - 63 x 50mm Elbow - 90 Degree RWC UGCF0320: JG MDPE Compression Elbow - 90D - 20mm UGCF0325: JG MDPE Compression Elbow - 90D - 25mm UGCF0332: JG MDPE Compression Elbow - 90D - 32mm UGCF0340: JG MDPE Compression Elbow - 90D - 40mm UGCF0350: JG MDPE Compression Elbow - 90D - 50mm UGCF0363: JG MDPE Compression Elbow - 90D - 63mm Male Threaded Elbow RWC UGCF75M2534BSP: JG MDPE Compression Male Elbow - 25mm x 3/4" UGCF75M321BSP: JG MDPE Compression Male Elbow - 32mm x 1" Female Threaded Elbow RWC UGCF75F2012BSP: JG MDPE Compression Fem Elbow - 20mm x 1/2" UGCF75F2034BSP: JG MDPE Compression Fem Elbow - 20mm x 3/4" UGCF75F2512BSP: JG MDPE Compression Fem Elbow - 25mm x 1/2" UGCF75F2534BSP: JG MDPE Compression Fem Elbow - 25mm x 3/4" UGCF75F251BSP: JG MDPE Compression Fem Elbow - 25mm x 1" UGCF75F321BSP: JG MDPE Compression Fem Elbow - 32mm x 1" UGCF75F40114BSP: JG MDPE Compression Fem Elbow - 40mm x 1-1/4" UGCF75F40112BSP: JG MDPE Compression Fem Elbow - 40mm x 1-1/2" UGCF75F50112BSP: JG MDPE Compression Fem Elbow - 50mm x 1-1/2" UGCF75F632BSP: JG MDPE Compression Fem Elbow - 63mm x 2" Wall Plate Elbow (PP) RWC UGCF88WB2012BSP: JG MDPE Compression Wall Elbow - 20mm x 1/2" UGCF88WB2534BSP: JG MDPE Compression Wall Elbow - 25mm x 3/4" Equal Tee RWC UGCF0220: JG MDPE Compression Equal Tee - 20mm UGCF0225: JG MDPE Compression Equal Tee - 25mm UGCF0232: JG MDPE Compression Equal Tee - 32mm UGCF0240: JG MDPE Compression Equal Tee - 40mm UGCF0250: JG MDPE Compression Equal Tee - 50mm UGCF0263: JG MDPE Compression Equal Tee - 63mm Repair Coupling RWC UGCF04R25: JG MDPE Compression Repair Coupling - 25mm UGCF04R32: JG MDPE Compression Repair Coupling - 32mm UGCF04R40: JG MDPE Compression Repair Coupling - 40mm UGCF04R50: JG MDPE Compression Repair Coupling - 50mm UGCF04R63: JG MDPE Compression Repair Coupling - 63mm Conversion Adaptor - MPDE to Copper (Pushfit) RWC UGCF01PF2522: JG MDPE Compression Conversion Adpt - 25 x 22mm UGCF01PF3222: JG MDPE Compression Conversion Adpt - 32 x 22mm UGCF01PF3228: JG MDPE Compression Conversion Adpt - 32 x 28mm Models added September 2025 UGCF75F321BSP ELBOW THREADED FEMALE 32 X 1" UGCF30A505032 TEE REDUCING 50X32X50 Models added January 2026 UGCF01IMP2012BSP - Coupling 1/2"x20 UGCF01IMP2512BSP - Coupling 1/2"x25 UGCF01IMP2534BSP - Coupling 3/4"x25 UGCF0316: ELBOW - 90 DEGREE 16X16 UGCF0216: EQUAL TEE 16X16X16 UGCF30A202016: TEE REDUCING 20X16X20 UGCF4616: END PLUG 16MM UGCF0416: COUPLING 16X16 UGCF202016: REDUCING COUPLING 20X16 UGCF202516: REDUCING COUPLING 25X16 UGCF01PF2015: UNIVERSAL FITTING - CONVERSION REDUCER 20X15 UGCF01PF2515: UNIVERSAL FITTING - CONVERSION REDUCER 25X15 UGCF45M1612BSP: ADAPTOR MALE 16X UGCF45M1634BSP: ADAPTOR MALE 16X UGCF45F1612BSP: ADAPTOR FEMALE 16X 1/2’’ UGCF45F1634BSP: ADAPTOR FEMALE 16X 3/4’’

Approval Holder:

Reliance Worldwide Corporation (UK)

Company Name

Reliance Worldwide Corporation (UK)

Address

Horton Road, West Drayton

Postcode

UB7 8JL

Country

United Kingdom

Phone

+44 7730 052060

General Email

PETER.LANCASTER@RWC.COM

View All Listings by this Company

Range of polypropylene push-fit fittings. The 20, 25 and 32mm sizes are for use with MDPE Pipe (manufactured to BS EN 12201-2). The 15, 22 and 28mm connections are for use with the following pipes: PEX (manufactured to BS 7291-3) for 15, 22 and 28mm sizes. PB (manufactured to BS 7291-2) and Copper (manufactured to BS EN 1057) for 15 and 22mm sizes only. Maximum working pressures: UG601B model: 16.0 bar. All other models: 12.5 bar. Cold water use only.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

260202004

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

The blue (UTS) and beige (TSM) pipe inserts must be used to maintain the validity of this approval.

Size:

See model.

Marking:

PN, JG & size on body. JG on pipe inserts.

Installation Requirements:

R001

Expiry date:

28/02/2031

Model:

Couplers: UG601B: 20 x 15MM PE-COPPER COUPLER, UG602B: 25 x 22Mm PE-COPPER COUPLER, UG603B: 25 x 15MM PE-COPPER COUPLER, UG604B: 32 x 28MM PE-COPPER COUPLER, UG063228B: 32 x 28MM REDUCER. Pipe inserts (blue) for use with MDPE pipe: UTS147-DB 20MM pipe insert, UTS197-DB 25MM pipe insert, UTS251-DB 32MM pipe insert. Pipe inserts (beige) for use with PB or PEX pipe: TSM15N 15MM pipe insert, TSM22N 22MM pipe insert. Pipe inserts (beige) for use with PEX pipe: TSM28N 28MM pipe insert.

Approval Holder:

Reliance Worldwide Corporation (UK)

Company Name

Reliance Worldwide Corporation (UK)

Address

Horton Road, West Drayton

Postcode

UB7 8JL

Country

United Kingdom

Phone

+44 7730 052060

General Email

PETER.LANCASTER@RWC.COM

View All Listings by this Company