Range of wall mounted (swivel) spout outlets with chromium plated brass bodies, EDPM ‘O’-rings and a plastic flow straightener. DJ suffix models have a double swivel arm. Maximum operating temperature 65°C.

Section:

0682 Combination Tap Assemblies

Section Subtitle:

Spout outlet(s).

WRAS Approval Number:

2105031

Note:

Open outlet use only.

Size:

½” BSP (M)

Marking:

Top rinse (brand of Zhejiang Sunmixer Sanitary Ware CO.,LTD) and WRAS on base of spout.

Installation Requirements:

R001 R040

Expiry date:

31/05/2026

Model:

9808-X Where X can be replaced by any of the following codes to determine the swivel radius of the spout. Single swivel arm: 06 = 6” 08 = 8” 10 = 10” 12 = 12” 14 = 14” 16 = 16” 18 = 18” P1 = 2-3/4” P2 = 2-11/16” P3 = 5-11/16” P4 = 7-3/4” P5 = 8-3/4” P6 = 12-1/4” Double swivel arm: 006DJ = 6” + 6” 007DJ = 6” + 9” 008DJ = 6” + 12” 009DJ = 12” + 12”

Approval Holder:

Zhejiang Sunmixer Sanitary Ware Co.,Ltd

Company Name

Zhejiang Sunmixer Sanitary Ware Co.,Ltd

Address

Science & Technology Industrial Zone, Chumen, Yuhuan, Zhejiang

Country

China

Phone

+86-576-87121119

View All Listings by this Company

Manufacturer:

Zhejiang Sunmixer Sanitary Ware Co.,Ltd

Company Name

Zhejiang Sunmixer Sanitary Ware Co.,Ltd

Address

Science & Technology Industrial Zone, Chumen, Yuhuan, Zhejiang

Country

China

Phone

+86-576-87121119

View All Listings by this Company

‘Quattroselect’ range of chemical dosing units incorporating a lockable self-closing trigger assembly and a self-closing bottle filler assembly which control the flow. The products are supplied with an approved double check valve assembly at the inlet (suitable for backflow prevention against fluid category 3). Maximum working pressure 5.8 bar. Cold water use only.

Section:

0970 Dosing Equipment

Section Subtitle:

Fittings in this section have been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. The decision of the Scheme to list them is not to be taken as any guide as to their effectiveness to do the job for which they have been designed

WRAS Approval Number:

2110700

Size:

¾” BSP (M)

Marking:

Quattroselect on hose trigger. Diversey on label on door panel. Quattroselect on front panel. Other product info inside door panel.

Installation Requirements:

R001 R160 R040

Expiry date:

31/10/2026

Proviso:

Not suitable for use with chemicals greater than a fluid category 3 risk.

Model:

1219424 – QuattroSelect Pouch air gap CW 1219425 – QuattroSelect Pouch safe gap CW 1211418 – QuattroSelect Pouch air gap

Approval Holder:

Diversey Europe Operations BV.

Company Name

Diversey Europe Operations BV.

Address

De Boelelaan 32, 1083 HJ Amsterdam, Netherlands

View All Listings by this Company

Filling link assembly, incorporating a sliding manifold with EPDM ‘O’-rings, isolation valves and an isolation valve with a double check valve assembly (verified by test as suitable for backflow protection against Fluid Category 3). Maximum working pressure 10.0 bar. Cold water use only.

Section:

1015 Filling Loop

Size:

½” BSP (M) x ¾” BSP (M).

Marking:

Novasfer logo, date of manufacture (YY/WW), made in Italy and CR on body.

Installation Requirements:

R001

Expiry date:

30/06/2026

Model:

Art. Kit 1360/1361/3435

Product Images

Approval Holder:

Novasfer Srl Unipersonale

Company Name

Novasfer Srl Unipersonale

Address

Via G. Galilei 3 Fraz. Carzago 25080 Calvagese D.Rivieria (BS)

Country

Italy

Phone

Tel: +39 030 6809011 Fax: +39 030 6800172

View All Listings by this Company

Manufacturer:

Novasfer Srl Unipersonale

Company Name

Novasfer Srl Unipersonale

Address

Via G. Galilei 3 Fraz. Carzago 25080 Calvagese D.Rivieria (BS)

Country

Italy

Phone

Tel: +39 030 6809011 Fax: +39 030 6800172

View All Listings by this Company

Range of brass compression fittings for use with copper pipe (manufactured to IS EN 1057). Maximum working pressure 10.0 bar. Maximum operating temperature 99°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2105024

Size:

See model

Marking:

IDC logo: E mark (~E~ within circle) on fitting body. Size on nut.

Installation Requirements:

R001

Expiry date:

31/05/2026

Model:

Straight Coupling C x C: BF3104: 1¼” compression, BF3105: 1½” compression. Straight coupler M x C: BF3114: 1¼" BSP (M) x 1¼" compression, BF3115: 1½" BSP (M) x 1½" compression. Straight coupler F x C: BF3124: 1¼" BSP (F) x 1¼" compression, BF3125: 1½" BSP (F) x 1½" compression. Elbow C x C: BF3154: 1¼” compression, BF3155: 1½” compression. Elbow M x C: BF3164: 1¼" BSP (M) x 1¼" compression, BF3165: 1½" BSP (M) x 1½" compression. Elbow F x C: BF3174: 1¼" BSP (F) x 1¼" compression, BF3175: 1½" BSP (F) x 1½" compression. TEE C x C x C: BF3184: 1¼" compression, BF3185: 1½" compression. Tank Connector: BF3504: 1¼" compression, BF3505: 1½" compression. Stop End: BF3514: 1¼" compression, BF3515: 1½" compression. Blanking cap: BF3724: 1¼" compression, BF3725: 1½" compression. Blanking Plug: BF0744:1¼" compression, BF0745:1½" compression. Models added October 2021; Straight Coupling C x C: BF3106: 2” compression. Straight coupler M x C: BF3116: 2” BSP (M) X 2” compression. Straight coupler F x C: BF3126: 2" BSP (F) x 2" compression, Elbow C x C: BF3156: 2” compression. Elbow M x C: BF3166: 2" BSP (M) x 2" compression. Elbow F x C: BF3176: 2" BSP (F) x 2" compression. TEE C x C x C: BF3186: 2” compression. Tank Connector: BF3506: 2” compression.

Approval Holder:

IDC Plumbing & Heating Technology (Beijing) Co., Ltd.

Company Name

IDC Plumbing & Heating Technology (Beijing) Co., Ltd.

Address

3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

Postcode

100015

Country

China

Phone

008610 51659550 ext 312

General Email

Jerry.tang@idcgroup.com.cn

View All Listings by this Company

Range of brass compression fittings for use with copper pipe IS EN 1057. Maximum working pressure 10.0 bar. Maximum operating temperature 99°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2105048

Size:

See model

Marking:

SOUTH COAST SALES LOGO ON BODY Size on nut.

Installation Requirements:

R001

Expiry date:

31/05/2026

Model:

Straight Coupling C x C: BF3104: 1 1/4” Compression, BF3105: 1 1/2” Compression. Straight coupler M x C: BF3114: 1 1/4" Male BSP x1 14" Compression, BF3115: 1 1/2" Male BSP x1 1/2" Compression. Straight coupler F x C: BF3124: 1 1/4" Female BSP x 1 1/4" Compression, BF3125: 1 1/2"F x 1 1/2" Compression. Elbow C x C: BF3154: 1 1/4” compression, BF3155: 1 1/2” compression. Elbow M x C: BF3164: 1 1/4" Male BSP x 1 1/4" Compression, BF3165: 1 1/2" Male BSP x 1 1/2" Compression. Elbow F x C: BF3174: 1 1/4" Female x 1 1/4" Compression, BF3175: 1 1/2" Female BSP x 1 1/2" Compression. TEE C x C x C: BF3184: 1 1/4" Compression, BF3185: 1 1/2" Compression. Tank Connector: BF3504:1 1/4" Compression, BF3505:1 1/2" Compression. Stop End: BF3514:1 1/4" Compression, BF3515:1 1/2" Compression. Blanking cap: BF3724:1 1/4" Compression, BF3725:1 1/2" Compression. Blanking Plug: BF0744:1 1/4" Compression, BF0745:1 1/2" Compression.

Product Images

Approval Holder:

South Coast Sales

Company Name

South Coast Sales

Address

1 Doughcloyne Industrial Estate, Sarsfield Road, Wilton, Cork.

Postcode

T12 TR62

Country

Ireland

Phone

00353 21 - 43 46 143

General Email

info@southcoastsales.com

View All Listings by this Company