Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #2201036

Range of wall mounted spout outlets (brass bodies, various finishes) incorporating a plastic aerator. Maximum operating temperature 60°C.

Section:: 0682 Combination Tap Assemblies
Section Subtitle:: Spout outlet(s).
WRAS Approval Number:: 2201036
Note:: Open outlet use only
Size:: ¾” BSP (F)
Marking:: Coalbrook logo (brand of Davroc) on underside of spout.
Installation Requirements:: R001 R040
Expiry date:: 31/01/2027
Model:: XX 2003 YY Understanding the product code: XX: Replaced with letters representing the name of the trim. The number of letters will depend on the name of the trim. Examples are: DO which represents the name 'Domo' and BA which represents 'Bank'. 2003: model range. YY: Replaced with letters representing the colour/plating options available. The number of letters will depend on the name of the finish. Examples are: BB - Brushed Brass, BN - Brushed Nickel, CP - Chrome, GM - Gunmetal, SB - Stable Brass.

Product Images

Approval Holder:: Davroc Limited

Company Name
Davroc Limited
Postcode
EN11 0QS
Country
United Kingdom
General Email
rob@lefroybrooks.co.uk

View All Listings by this Company

WRAS Approval Number: #2204018

A range of spout outlets with PVC lined stainless steel interlocked tube covered by silica gel. Model WD-PVC-09-10 is a double outlet. Maximum working temperature 65°C.

Section:: 0682 Combination Tap Assemblies
Section Subtitle:: Spout outlet(s).
WRAS Approval Number:: 2204018
Note:: For open outlet use only.
Size:: Model W-PVC-1-8- 19mm spigot with O-rings x M 22 male outlet Model W-PVC-1-10- 22mm sleeve to fit over a spigot with O-rings x M 24 female outlet Model W-PVC-6-10- M 15 female inlet x M 24 female outlet Model WD-PVC-09-10- 21mm spigot with O-ring inlet x M 22 male outlet
Marking:: HAOYING, WRAS and date of manufacturer in format MM/YY on inlet connector
Installation Requirements:: R001 R040
Expiry date:: 30/04/2027
Model:: Model W-PVC-1-8 Model W-PVC-1-10 Model W-PVC-6-10 Model WD-PVC-09-10 Available in either DN10 or DN12.

Product Images

Approval Holder:: Ningbo Haoying Sanitary Ware Technology Co., Ltd

Company Name
Ningbo Haoying Sanitary Ware Technology Co., Ltd
Address
Lubu Town, Yuyao Ningbo Zhejiang
Country
China

View All Listings by this Company
Manufacturer:: Ningbo Haoying Sanitary Ware Technology Co., Ltd

Company Name
Ningbo Haoying Sanitary Ware Technology Co., Ltd
Address
Lubu Town, Yuyao Ningbo Zhejiang
Country
China

View All Listings by this Company

WRAS Approval Number: #2203343

Range of dosing pumps with plastic bodies. Models PM004 & PM005 have a maximum operating pressure of 6.0 bar. All other models have a maximum operating pressure of 10.0 bar. Cold water use only.

Section:: 0970 Dosing Equipment
Section Subtitle:: Fittings in this section have been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. The decision of the Scheme to list them is not to be taken as any guide as to their effectiveness to do the job for which they have been designed
WRAS Approval Number:: 2203343
Note:: Only for use with AcquaSIL 2/15 solution.
Size:: Please refer to model.
Marking:: Acqua Brevetti logo (styalised B), serial number and date of manufacture (MM/YY) on body.
Installation Requirements:: R001 R008 R120 R150 R170 R290
Expiry date:: 31/03/2027
Model:: PM004 Minidue: ½” BSP (M). PM005 Minidue: ½” BSP (F). PM005S Minidue: ½” BSP (F). PM0011S Minidue 3/4: ¾” BSP (M). PM007S Minidue 360: ½” BSP (F). PM006S Minidue Filtro: ½” BSP (F).

Product Images

Approval Holder:: Acqua Brevetti SRL

Company Name
Acqua Brevetti SRL
Address
Via Molveno 8 Mestrino (PD)
Postcode
35035
Country
Italy
Phone
+390498974006
General Email
dpajaro@acquabrevetti.it

View All Listings by this Company
Manufacturer:: Acqua Brevetti SRL

Company Name
Acqua Brevetti SRL
Address
Via Molveno 8 Mestrino (PD)
Postcode
35035
Country
Italy
Phone
+390498974006
General Email
dpajaro@acquabrevetti.it

View All Listings by this Company

WRAS Approval Number: #2111057

Filling link assembly with a nylon body and EPDM ‘O’-rings. The product incorporates a screwdriver operated shut off valve and two check valve cartridges, verified by test (suitable for backflow protection against Fluid Category 3). The product is also supplied with two screwdriver operated angled spherical valves and a mounting bracket. Maximum working pressure 10.0 bar. Cold water use only.

Section:: 1015 Filling Loop
Size:: 8-750-731-754 Integral Filling Link Assembly: ½” BSP (M). 7-716-192-281 & 8-716-107-303 Integral Filling links: DN22 ØD manifold connection inlet/outlet.
Marking:: Bosch, flow arrow, Worcester, model and date of manufacture (dial format) on body.
Installation Requirements:: R001
Expiry date:: 30/11/2026
Model:: 8-750-731-754 (Complete) Integral Filling Link Assembly Consisting of either: 7-716-192-281 or 8-716-107-303 Integral Filling links.

Product Images

Approval Holder:: Worcester Bosch

Company Name
Worcester Bosch
Address
Cotswold Way Warndon Worcester
Postcode
WR4 9SW
Country
United Kingdom
Phone
+44 1905 752761
General Email
ian.sharp@uk.bosch.com

View All Listings by this Company
Manufacturer:: Worcester Bosch

Company Name
Worcester Bosch
Address
Cotswold Way Warndon Worcester
Postcode
WR4 9SW
Country
United Kingdom
Phone
+44 1905 752761
General Email
ian.sharp@uk.bosch.com

View All Listings by this Company

WRAS Approval Number: #2203055

Filling loop assemblies comprising of a stainless steel braided, EPDM lined hose, double check valve assembly with isolation valve verified by test (suitable for backflow protection against fluid category 3) and either a straight or tee isolation valve. Maximum working pressure 10.0 bar. Maximum operating temperature 85ºC.

Section:: 1015 Filling Loop
Size:: 15mm compression inlet/outlet
Marking:: Company logo "S", WRAS, date of manufacture (YYYY) on crimp connection of hose. CR and flow arrow on double check valve assembly.
Installation Requirements:: R001
Expiry date:: 31/03/2027
Model:: SS-E6-01 (STRAIGHT ISOLATION VALVE) & SS-E6-02 (TEE ISOLATION VALVE) FILLING LOOP ASSEMBLIES

Product Images

Approval Holder:: Ningbo Safewell Plumbing Co. Ltd.

Company Name
Ningbo Safewell Plumbing Co. Ltd.
Address
199 Xiangyun North Road Ningbo Hi-Tech Zone Zhejiang
Country
China

View All Listings by this Company