Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #241015013

Range of stainless steel braided hoses, incorporating a dual layered hose consisting of a clear PE liner and black coloured EPDM outer layer. The SOG1212XXX(GLF)CS model incorporates an isolation valve. The models with compression connections are for use with copper pipe (manufactured to EN 1057). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:: 1860 Tubes
Section Subtitle:: Plastic hoses.
WRAS Approval Number:: 241015013
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: Please refer to model
Marking:: Coastal, WRAS and date of manufacture (YYYY) on ferrule.
Installation Requirements:: R001
Expiry date:: 31/10/2029
Model:: SG(1)(2)XXX DN8 bore diameter hose. Where: (1) and (2) are: options for the fittings at two ends, and can be: 12 = ½” BSP (F) captive nut. 12M = ½” BSP (M). 38 = ⅜" BSP (F) captive nut. M10 = M10 thread. 34 = ¾” BSP (F) captive nut. 12CS = ½” BSP (F) CS. SOG1212XXXCS = ½” BSP (F) CS x 15mm compression. SOG1212XXX(GLF)CS = ½” BSP (F) CS x 15mm compression with isolation valve. XXX denotes the hose length range between 30cm (030) and 200cm (200).

Approval Holder:: Coastal (Ningbo) Hardware Mfg Co Ltd

Company Name
Coastal (Ningbo) Hardware Mfg Co Ltd
Address
28# Tianlongshan Road Ningbo Economic & Technology Development Zone Ningbo
Country
China
General Email
sales@coastalningbo.com

View All Listings by this Company
Manufacturer:: Coastal (Ningbo) Hardware Mfg Co Ltd

Company Name
Coastal (Ningbo) Hardware Mfg Co Ltd
Address
28# Tianlongshan Road Ningbo Economic & Technology Development Zone Ningbo
Country
China
General Email
sales@coastalningbo.com

View All Listings by this Company

WRAS Approval Number: #241015014

Range of stainless steel braided PEX lined flexible hose assemblies with EPDM washers and/or ‘O’-rings, and brass end connections. The 15mm compression connection incorporates an isolation valve. The models with compression connections are for use with copper pipe (manufactured to EN 1057). Maximum working pressure 10.0 bar. Maximum working temperature 85°C.

Section:: 1860 Tubes
Section Subtitle:: Plastic hoses.
WRAS Approval Number:: 241015014
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: Please refer to model
Marking:: RGRB, WRAS and date of manufacture (YYYY) on sleeves.
Installation Requirements:: R001 R008
Expiry date:: 31/10/2029
Model:: YB-PEX-01 series Bore diameters: DN6, DN7, DN8, DN9, DN10. End connections: G⅜(F), G½(F), G¾(F), M8x1, M10x1, M12x1, M15x1, G⅜(M), G½(M), G¾(M), 15mm compression with isolation valve.

Manufacturer:: Jiangmen Yubo Sanitary Ware Co., Ltd.

Company Name
Jiangmen Yubo Sanitary Ware Co., Ltd.
Address
102, 202, 302, Building 32 No 8 Longxiang Rd Guangdong Province
Postcode
529729
Country
China

View All Listings by this Company

WRAS Approval Number: #250102002

Range of EPDM hoses with either nylon or stainless-steel braiding, with or without a PVC sheath. Some models incorporate isolation valves. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 250102002
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See Models below
Marking:: Shida logo, Wras and date of manufacture (YYYY) on hose ferrule. Flow arrow on isolation valve.
Installation Requirements:: R001
Expiry date:: 31/01/2030
Model:: SD-DD-01 (Stainless-steel braided – no sheath): Size: DN6 - F3/8, F1/2, M8X1, M8X1.25, M10X1, F15X1, M15X1. Size: DN8 - F3/8, F1/2, F3/4, M8X1, M8X1.25, M10X1, M12X1, 15mm, 15mm valve, 22mm, 22mm valve, F15X1, M15X1. Size: DN10 - F1/2, F3/4, M10X1, M12X1, 15mm compression, 15mm compression iso valve, 22mm compression, 22mm compression iso valve. Size: DN13 - F1/2, F3/4, 15mm compression, 15mm compression iso valve, 22mm compression, 22mm compression iso valve. SD-DD-02 (Nylon braided – no sheath) Size: DN6 - F3/8, F1/2, M8X1, M8X1.25, M10X1, F15X1, M15X1. Size: DN8 - F3/8, F1/2, F3/4, M8X1, M8X1.25, M10X1, M12X1, 15mm compression, 15mm compression iso valve, 22mm compression, 22mm compression iso valve, F15X1, M15X1. SD-DD-03 (stainless-steel braided with PVC Sheath) Size: DN8 - F3/8, F1/2, F3/4, M8X1, M8X1.25, M10X1, M12X1, 15mm compression, 15mm compression iso valve, 22mm compression, 22mm compression iso valve, F15X1, M15X1. SD-DD-04 (nylon braided with PVC Sheath) Size: DN8 - F3/8, F1/2, F3/4, M8X1, M8X1.25 M10X1, M12X1, 15mm compression, 15mm compression iso valve, 22mm compression, 22mm compression iso valve, F15X1, M15X1

Approval Holder:: Zhejiang Shida Pipe Co. Ltd

Company Name
Zhejiang Shida Pipe Co. Ltd
Address
Chumen Technology Industrial Zone, Wujia District, Yuhuan City, Chumen Yuhuna
Country
China
General Email
76991784@qq.com

View All Listings by this Company

WRAS Approval Number: #241002025

Range of elastomeric shower hoses with EPDM lining and ‘O’-rings. The product incorporates a flow restrictor. Maximum operating temperature 60.0°C Open outlet use only

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 241002025
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 1/2" BSP (F)
Marking:: Hansgrohe logo on flow control (models 28 249 xx0 & 28 248 xx0 AXOR logo on flow control (all other models)
Installation Requirements:: R001
Expiry date:: 31/10/2029
Model:: AXOR 28 127 xx0 28 128 xx0 30 246 018 Hansgrohe 28 249 xx0 28 248 xx0 Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Product Images

Approval Holder:: Hansgrohe SE

Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

WRAS Approval Number: #241002059

Range of stainless-steel braided flexible hose assemblies incorporating EPDM inner and plastic (BFSFH12-EE80/150) or brass (BFSFH19-EE60) captive nut end connections. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 241002059
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 3/4” BSP X 3/4” BSP ELBOW.
Marking:: MIDBRASS®, WRAS and Year of manufacture (YYYY).
Installation Requirements:: R001 R008
Expiry date:: 31/10/2029
Model:: BFSFH12-EE80, BFSFH19-EE60 & BFSFH12-EE150.

Product Images

Approval Holder:: Navigator MSL Ltd.

Company Name
Navigator MSL Ltd.
Address
Mill Road, Sharnbrook, Beds.
Postcode
MK44 1NP
Phone
01234 781234

View All Listings by this Company