‘UPM10’ and ‘UPM20’ range of circulator pumps with a stainless-steel body, plastic impellor and EPDM ‘O’-rings. The product is supplied with EPDM gaskets for the inlet and outlet. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

241207701

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1½” BSP (M) inlet/outlet.

Marking:

Grundfos and Grundfos logo, type and model on nameplate on motor housing. P/N no., P/C no., Serial (S/N) no., technical info, manufacturing country and data matrix on end of motor housing. Flow arrow on body.

Installation Requirements:

R001

Expiry date:

31/12/2029

Model:

UPM 10M 25-95 N 180, UPM 10L 25-105 N 180, UPM 10XL 25-125 N 180, UPM 20S 25-145 N 180. Where: Pump type: UPM 10M, UPM 10L, UPM 10XL, UPM 20S. Control variant: []: PWM, LIN: LIN bus input signal, 0-10V, AUTO, HYBRID, SOLAR, DHW. Nominal diameter: 25: G 1½”. Max. Head: 95: 9.5m, 105: 10.5m, 125: 12.5m, 145: 14.5m. Designation/Pump housing: N 180: Stainless steel body, 180mm port to port length. Control box orientation: 3: 3 o’clock (right), 6: 6 o’clock (below), 9: 9 o’clock (left). Customer code: XXX (no impact on water contact parts).

Product Images

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Country

Denmark

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company

Range of horizontal multistage pumps with stainless steel bodies, diffuser and impellers and EPDM ‘O’-rings. The products incorporate a graphite-SiC-EPDM shaft seal. The products incorporate a drain plug. Maximum working pressure 8.5 bar. 9Maximum operating temperature 80°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

241002722

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

The discharge from the drain plug must be via a type `AA`, `AB` or `AD` airgap, or in accordance with EN1717.

Size:

P 3S & U 5S models: 1” BSP (F) inlet x 1” BSP (F) outlet. P 7S models: 1¼” BSP (F) inlet x 1” BSP (F) outlet. P 9S models: 1½” BSP (F) inlet x 1¼” BSP (F) outlet. P 18S models: 2” BSP (F) inlet x 1½” BSP (F) outlet.

Marking:

Foras (Brand of Pentax), model code and other technical information on data plate on body.

Installation Requirements:

R001 R415

Expiry date:

31/10/2029

Model:

P range: P X(S) - XX/Y (T) Where: P = pump model X = Nominal flow-rate m³/h (3, 5, 7, 9, 18 see model list), S = ULTRA S range - stainless steel hydraulic part, XX = nominal power HPx100 (50 - 400 see model list), Y = Number of impellers (2 - 7 see model list), T = 3 phase, [blank] = single phase. P 3S models: P 3S-50/2; P 3S-70/3; P 3S-90/4; P 3S-100/5; P 3S-120/6; P 3S-150/7. P 5S models: P 5S-70/2; P 5S-80/3; P 5S-120/4; P 5S-150/5; P 5S-180/6; P 5S-200/7. P 7S models: P 7S-100/2; P 7S-120/3; P 7S-180/4; P 7S-250/5; P 7S-300/6. P 9S models: P 9S-100/2; P 9S-150/3; P 9S-200/4; P 9S-250/5. P 3S models: P 3S-50/2 T; P 3S-70/3 T; P 3S-90/4 T; P 3S-100/5 T; P 3S-120/6 T; P 3S-150/7 T. P 5S models: P 5S-70/2 T; P 5S-80/3 T; P 5S-120/4 T; P 5S-150/5 T; P 5S-180/6 T; P 5S-200/7 T. P 7S models: P 7S-100/2 T; P 7S-120/3 T; P 7S-180/4 T; P 7S-250/5 T; P 7S-300/6 T; P 7S-350/7 T. P 9S models: P 9S-100/2 T; P 9S-150/3 T; P 9S-200/4 T; P 9S-250/5 T. P 18S models: P 18S-180/2 T; P 18S-250/3 T; P 18S-400/4 T.

Approval Holder:

PENTAX INDUSTRIES SpA

Company Name

PENTAX INDUSTRIES SpA

Address

Viale dell’Industria 1 Veronella

Postcode

37040

Country

Italy

Phone

+39 0442 489567

General Email

g.cengia@pentax-pumps.it

View All Listings by this Company

Range of wall mounted shower heads incorporating (chromium plated brass body) and EPDM ‘O’-rings. Maximum operating temperature 60°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

241004040

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Open outlet use only

Size:

15mm compression

Marking:

DTC15 on body

Installation Requirements:

R001 R040

Expiry date:

31/10/2029

Model:

AVSH001

Product Images

Approval Holder:

Methven UK Limited

Company Name

Methven UK Limited

Address

3-3A Stone Cross Court Yew Tree Way Golborne Warrington

Postcode

WA3 3JE

Country

United Kingdom

Phone

0800 195 1602

General Email

raluca.olariu@uk.methven.com

View All Listings by this Company

Range of Y type strainers with blue epoxy coated ductile iron bodies and EPDM ‘O’-rings. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C

Section:

1715 Strainers

Size:

DN50 up DN400 flanged inlet and outlet

Marking:

Oventrop, size and pressure on data plate on body. Size, pressure and flow arrow on body.

Installation Requirements:

R001

Expiry date:

30/11/2026

Model:

166 10 SERIES

Approval Holder:

Oventrop GmbH & Co KG

Company Name

Oventrop GmbH & Co KG

Address

Paul-Oventrop-Strasse 1, 59939 Olsberg

Country

Germany

View All Listings by this Company

Range of Y type strainers with blue epoxy coated ductile iron bodies and EPDM ‘O’-rings. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C

Section:

1715 Strainers

Size:

DN50 up DN400 flanged inlet and outlet

Marking:

TROUVAY & CAUVIN, WRAS size and pressure on data plate on body. Size, pressure and flow arrow on body.

Installation Requirements:

R001

Expiry date:

30/11/2026

Model:

TCDIYST16 TCDIYST25

Approval Holder:

TROUVAY & CAUVIN

Company Name

TROUVAY & CAUVIN

Address

P.O. Box 16954, Jebel Ali Free Zone

Country

United Arab Emirates

View All Listings by this Company