Combination Tap Assemblies

Section Code 0684 : Tap(s) with a non-touch methods of flow control and a single inlet.

Back To Directory Sections

#2204115

Wall mounted, single hole, single outlet (fixed) electronically controlled tap assemblies (chromium plated brass). The flow is controlled by a solenoid valve activated via an infra-red sensor. The spout outlets incorporate plastic flow straightener, and the inlet incorporates a plastic filter. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
2204115
Size:
½” BSP (M)
Marking:
Delabie on end of spout
Installation Requirements:
R001 R040 R570
Expiry date:
30/04/2027
Model:
443406SY

Approval Holder:
Syspal
Company Name
Syspal
Address
Cockshutt Lane Broseley Shropshire
Postcode
TF12 5JA

View All Listings by this Company

Print This Approval


#251202009

Range of deck mounted single hole, single outlet, fixed electronically controlled tap assemblies with (brass bodies – various finishes), incorporating a solenoid valve controlling the flow which is activated via an infrared sensor. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
251202009
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M)
Marking:
MCM and product code on rear of tap body
Installation Requirements:
R001 R006 R008
Expiry date:
31/12/2030
Model:
7035B – Electronic basin tap powered by battery 7035C – Electronic basin tap powered by mains 703500 CR - Electronic basin tap powered by mains 703500 BM - Electronic basin tap powered by mains 703500 NM - Electronic basin tap powered by mains 703500 PG - Electronic basin tap powered by mains 703500 PC - Electronic basin tap powered by mains 703500 PM - Electronic basin tap powered by mains 703501 CR - Electronic basin tap powered by battery 703501 BM - Electronic basin tap powered by battery 703501 NM - Electronic basin tap powered by battery 703501 PG - Electronic basin tap powered by battery 703501 PC - Electronic basin tap powered by battery 703501 PM - Electronic basin tap powered by battery

Approval Holder:
Rubinetterie MCM Intl. Srl.
Company Name
Rubinetterie MCM Intl. Srl.
Address
Via Dell'Acacia 54/56 I-28021 Borgomanero Italy

View All Listings by this Company

Print This Approval


#251202010

Range of wall mounted, single outlet, fixed electronically controlled tap assemblies with (brass bodies - chrome plated), incorporating a solenoid valve controlling the flow which is activated via an infrared sensor. The spout outlet incorporates a plastic aerator, and the product is supplied with a metal backnut. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
251202010
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M)
Marking:
MCM and product code on rear of tap body
Installation Requirements:
R001 R008 R040
Expiry date:
31/12/2030
Model:
701701 (Battery) 701700 (Mains)

Approval Holder:
Rubinetterie MCM Intl. Srl.
Company Name
Rubinetterie MCM Intl. Srl.
Address
Via Dell'Acacia 54/56 I-28021 Borgomanero Italy

View All Listings by this Company

Print This Approval


#251202017

Range of deck mounted, single hole, single outlet (fixed) electronically controlled tap assemblies (chromium plated stainless brass body). Flow is controlled by a solenoid valve and is activated via an infrared sensor. The spout outlets incorporate plastic aerators. Maximum working pressure 8.0 Bar Maximum operating temperature 60.0°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
251202017
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
The products are not supplied with anything to connect between the solenoid valves (15mm compression) and the copper tail (10mm), or the stainless-steel tail (10mm), or the flexible inlet hose (15mm spigot) this must be sourced by the installer. R007 applies only to models that are supplied with PEX lined connecting hose assemblies.
Size:
15mm compression inlets
Marking:
DVS logo on body
Installation Requirements:
R001 R006 R007
Expiry date:
31/12/2030
Model:
AT01-001 Classic tap spout in chrome with pex tails AT01-002 Classic tap spout in chrome with copper tails AT01-003 Classic tap spout only in chrome stainless tails AT01-011 Classic Swan tap spout in chrome with pex tails AT01-012 Classic Swan tap spout in chrome with copper tails AT01-013 Classic Swan tap spout only in chrome stainless tails

Approval Holder:
KWC DVS Ltd.
Company Name
KWC DVS Ltd.
Address
Kemmings Close, Long Road, Paignton, Devon
Postcode
TQ4 7TW
Country
United Kingdom
Phone
01246 458 900
General Email
richard.lamb@kwc.com

View All Listings by this Company

Print This Approval


#251102014

Single hole, single outlet (fixed) electronically controlled tap assembly (chromium plated brass body), flow is controlled by a solenoid valve activated via an infra-red sensor. The spout outlet incorporates a plastic aerator, and the inlet hoses are supplied with stainless steel strainers. The inlet hose has and an approved check valve cartridge: however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 Bar Maximum operating temperature 60.0°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
251102014
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless Steel braided PEX lined flexible hose assemblies incorporating 3/8” BSP captive nut end connections
Marking:
Grohe on body.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
30/11/2030
Model:
36.366.002

Approval Holder:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Country
Germany
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 39 of 39

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.