Directory Search Results

Print List

#2212077

Range of single hole, single outlet, electronically controlled tap assemblies (chrome plated brass body). The flow is controlled by a solenoid valve activated via an infra-red sensor. The spout outlet incorporates a plastic aerator. Supplied with a stainless steel braided PEX lined flexible connection hose. Maximum working pressure 8.0 Bar.

Non-metallic materials and components comply with BS6920 at 70°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
2212077
Size:
10mm spigot.
Marking:
Stern on tap body.
Installation Requirements:
R001 R006 R007
Expiry date:
31/12/2027
Model:
350700, 350750, 350700-DP, 350750-DP.
Product Images

Approval Holder:
Y. Stern Engineering (1989) Ltd
Company Name
Y. Stern Engineering (1989) Ltd
Address
15 Gan Rave Blvd. Yavne
Postcode
8122217
Country
Israel
Phone
+972 8 9326007
General Email
leah@sternfaucets.com

View All Listings by this Company
Manufacturer:
Y. Stern Engineering (1989) Ltd
Company Name
Y. Stern Engineering (1989) Ltd
Address
15 Gan Rave Blvd. Yavne
Postcode
8122217
Country
Israel
Phone
+972 8 9326007
General Email
leah@sternfaucets.com

View All Listings by this Company

Print This Approval


#2301014

Range of single hole, single outlet (fixed) electronically controlled tap assemblies (chrome plated brass bodies). Flow is controlled by a solenoid valve activated via an infra-red sensor. The temperature is controlled via a manual operating single lever on body. The inlets hose incorporates stainless steel strainer and an approved check valve cartridge (however, the complete assembly has not been fully tested to demonstrate that it provides backflow protection). The spout outlet incorporates a plastic aerator and the product is supplied with metal backnuts. Maximum working pressure 8.0 Bar

Non-metallic materials and components comply with BS6920 at 70°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
2301014
Size:
Stainless steel braided PEX lined flexible hose assemblies with 3/8" BSP captive nut end connections.
Marking:
Stern on top of tap body
Installation Requirements:
R001 R009 R006 R010
Expiry date:
31/01/2028
Model:
239250 – Trendy 1000 Plus B 239350 - Trendy 1000 Plus E 239260 - Trendy 1000 Plus LB 239360 - Trendy 1000 Plus LE 239251 - Trendy 1000 Plus B AB 1953 239351 - Trendy 1000 Plus E AB 1953 239261 - Trendy 1000 Plus LB AB 1953 239361 - Trendy 1000 Plus LE AB 1953
Product Images

Approval Holder:
Y. Stern Engineering (1989) Ltd
Company Name
Y. Stern Engineering (1989) Ltd
Address
15 Gan Rave Blvd. Yavne
Postcode
8122217
Country
Israel
Phone
+972 8 9326007
General Email
leah@sternfaucets.com

View All Listings by this Company

Print This Approval


#2212304

Range of side and bottom entry BS1212-4 fill valves with plastic bodies. Maximum working pressure 10.0 bar. Coldwater use only.

Section:
2075 Float Operated Inlet Valve
Section Subtitle:
Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.
WRAS Approval Number:
2212304
Note:
IRN R560 applies to bottom entry valves only
Size:
½” BSP (M)
Marking:
Wirquin on body and BS1212-4 on float
Installation Requirements:
R001 R550 R560
Expiry date:
31/12/2027
Model:
Jollyfill Air range: Side entry, brass inlet: 220160, 10120694 Bottom entry, brass inlet: 220158, 10120703 Side entry, plastic inlet 220161, 10120701 Bottom entry, plastic inlet: 220159, 10120693
Product Images

Approval Holder:
Wirquin Plastiques
Company Name
Wirquin Plastiques
Address
11 rue du Chateau de Bel Air 44477 Carquefou Cedex France
Phone
+33 2 40 30 68 68
General Email
catherine.vernay@wirquin.com

View All Listings by this Company

Print This Approval


#2212064

Concealed WC dual flushing cistern with a bottom entry BS 1212 - 4(2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush outlet valve. The flush volume is operated by a two-push button assembly for a 6 or 3 litre flush volume. Maximum working pressure 10.0 bar, cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2212064
Size:
½” BSP (M)
Marking:
T1803 - WRAS, Model name and Bestter on bottom of cistern, 6 Litre inside of cistern. T1900 & T1901 - WRAS, Model name and Bestter on support bracket inside of cistern, 6 Litre inside of cistern Models Added December 2023: T1811: Bestter logo and WRAS approved product on bottom of cistern T1900 (600) – T19001 (600) t1900 Bestter logo and WRAS approved product on front of support bracket
Installation Requirements:
R001 R280 R556 R560 R571 R581
Expiry date:
31/12/2027
Model:
T1900 (500mm) with frame T1901 (500mm) without frame T1803 Models Added December 2023: T1811 T1900(600mm) T1901(600mm)
Product Images

Approval Holder:
Bestter(Xiamen) Technology lnc.
Company Name
Bestter(Xiamen) Technology lnc.
Address
No.601, Tonghong Road, Tong'an Park Tong'an Industrial Zone, Xiamen City , China

View All Listings by this Company
Manufacturer:
Bestter(Xiamen) Technology lnc.
Company Name
Bestter(Xiamen) Technology lnc.
Address
No.601, Tonghong Road, Tong'an Park Tong'an Industrial Zone, Xiamen City , China

View All Listings by this Company

Print This Approval


#2301072

Concealed WC dual flushing cistern with a vertical BS 1212-4(2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush outlet valve. The flush volume is operated by a two push button assembly for a 6 or 3 litre flush volume. Maximum working pressure - 10 Bar Maximum operating temperature – Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2301072
Size:
½” BSP (M)
Marking:
Roper Rhodes Group and model number on sticker on front of cistern. 6 Litre line inside of cistern
Installation Requirements:
R001 R280 R556 R571 R581
Expiry date:
31/01/2028
Model:
TR9001 / VOR790/ INST13001
Product Images

Approval Holder:
Roper Rhodes Ltd
Company Name
Roper Rhodes Ltd
Address
Brassmill Lane Industrial Estate Bath
Postcode
BA1 3JF
Country
United Kingdom
General Email
paulw@roperrhodes.co.uk

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 380 of 820

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.