Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #2112033

Range of WC pressure flushing valves with a solenoid valve controlling the flow. The valves are operated via an infra-red sensor or push-button assembly. The solenoid valve also incorporates a lever operated isolation valve. Maximum working pressure – 5.0 Bar. Cold water use only

Section:: 1305 Flushing Mechanisms
Section Subtitle:: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
WRAS Approval Number:: 2112033
Size:: ¾” BSP (M)
Marking:: Delable on Faceplate
Installation Requirements:: R001 R120 R090 R410 R570
Expiry date:: 31/12/2026
Model:: 464000, Tempomatic WC recessed bicontrol plate 464006, Tempomatic WC recessed bicontrol plate 464PBOX, Tempomatic WC recessed 464SBOX, Tempomatic WC recessed

Product Images

Approval Holder:: Delabie UK Ltd.

Company Name
Delabie UK Ltd.
Address
18,rue du Maréchal Foch Friville Escarbotin
Postcode
80210
Country
France
General Email
sebastien.spriet@delabie.fr

View All Listings by this Company
Manufacturer:: Delabie UK Ltd.

Company Name
Delabie UK Ltd.
Address
18,rue du Maréchal Foch Friville Escarbotin
Postcode
80210
Country
France
General Email
sebastien.spriet@delabie.fr

View All Listings by this Company

WRAS Approval Number: #2112357

Range of water meters with blue epoxy coated iron bodies and EPDM ‘O’-rings. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:: 1505 Water Meters
Size:: see model
Marking:: JET, Wolseley & Company details, WRAS approved and other technical information on dial.
Installation Requirements:: R001
Expiry date:: 31/12/2026
Model:: 171260 & 171280 – DN50 171261 & 171281 – DN65 171262 & 171282 – DN80 171263 & 171283 – DN100 171264 & 171284 – DN125 171265 & 171285 – DN150 171266 & 171286 – DN200

Product Images

Approval Holder:: Wolseley UK Ltd.

Company Name
Wolseley UK Ltd.
Address
2 Kingmaker Court, Warwick Technology Park, Warwick
Postcode
CV34 6DY
Country
United Kingdom
Phone
01926705792
General Email
martin.lister@wolseley.co.uk

View All Listings by this Company

WRAS Approval Number: #2110066

Range of vertical multistage pumps with stainless-steel bodies, stainless-steel impellers, shaft and outer sleeve. Maximum working pressures: T (oval flange): 16.0 bar. V (Victaullic & grooved), C (clamp flanges) & F (round flange) versions: 26.0 bar. Maximum operating temperature 100°C.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 2110066
Size:: EV1-EV3 & 1VR-3VR models - F (round flange) versions: DN25. EV6-EV20 & 6VR-20VR models - F (round flange) versions: DN32-50. EV1-EV20 & 1VR-20VR models - T (oval flange), V (Victaullic - EV; Grooved - VR), C (clamp flanges) & F (round flange) versions: DN32-50.
Marking:: Franklin Electric, model name, date of production (DD/MM/YYYY), pressure, temperature and other technical information on data plate on body.
Installation Requirements:: R001 R415
Expiry date:: 31/10/2026
Model:: EV and VR ranges. Code example (EV range): EV 20 /15 A B C D E F G H J K L M N PMP/A. Where: EV = Pump model EV (EV = E-Tech “brand”). 20 = Rated flow [m³/h] (varies: 1-20). /15 = No. of stages/impellers. (See model and stages below for more detail). A = No. of trimmed impellers, if "Empty" = none. B = Flange type: "F" - round; "T" - oval; "V" - Victaulic; "C" - clamp. C = Materials: "I" - (AISI304/EN1.4301); "N" (AISI316/EN1.4401). D = Motor power (kW x 10). E = Frequency: "5" - 50Hz; "6" - 60Hz. F = No. of motor poles: "Empty" - 2 poles; "4" - 4 poles. G = Motor type: "Empty" - without motor, "T" - 3-phase; "M" - 1-phase. H = Mechanical Seal: "Empty" - standard version (EV1-EV20 & 1VR-20VR versions only). J = Type of mechanical Seal: E1 (SiC-Carbon Graphite-EPDM) or E2 (SiC-SiC-EPDM). K = "Empty" - standard version, "H" - high pressure. L = "Empty" - standard version, "P" - passivated. M = "Empty" - standard version N = "Empty" - no motor, “IE..” motor efficiency class. PMP/A = cold formed pump casing. Code example (VR range): 3 VR0700 A B C X-XXXX. Where: 3 = Rated flow [m³/h] (varies: 1-20). VR = Pump model (VR = FPS “brand”). 07 = No. of stages/impellers. (See model and stages below for more detail). 00 = Impeller trim: 00 = no trim, A1 = 1A (one trimmed impeller), A2 = 2A (two trimmed impellers). A = Materials: "H" - (AISI304/EN 1.4301); "N" (AISI316/EN 1.4401). B = Flange type: "F" - round; "T" - oval; "V" - Grooved (Victaullic); "C" - clamp. C = Mechanical Seal: “1” - QBE; “2” - QQE. X-XXXX = Combination of numbers and letter relating to frame, speed, motor and electronics (does not affect water pathways). Last two digits can be empty for versions without a motor. Minimum and maximum number of stages (please note the oval flange models have a lower maximum, this is included in brackets as follows [15] to denote 15 stages): EV1/1VR: stage from 2 to 37 [23] (50Hz) and from 2 to 25 [15] (60Hz); EV3/3VR: stage from 2 to 33 [21] (50Hz) and from 2 to 23 [14] (60Hz); EV6/6VR: stage from 2 to 36 [21] (50Hz) and from 2 to 23 [14] (60Hz); EV10/10VR: stage from 2 to 24 [15] (50Hz) and from 2 to 17 [10] (60Hz); EV15/15VR: stage from 1 to 17 [10] (50Hz) and from 1 to 12 [10] (60Hz); EV20/20VR: stage from 1 to 17 [10] (50Hz) and from 1 to 10 [7] (60Hz).

Product Images

Approval Holder:: Franklin Electric SRL

Company Name
Franklin Electric SRL
Address
Via Asolo 7 Dueville Vicenza 36031
Country
Italy
Phone
+39 0444 360366
General Email
info.it@fele.com

View All Listings by this Company

WRAS Approval Number: #2110110

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 2110110
Size:: MVX1-MVX3 - F (round flange) versions: DN25. MVX6-MVX15 models - F (round flange) versions: DN32-50. MVX1-MVX15 models - T (oval flange), V (Victaullic - EV; Grooved - VR), C (clamp flanges) & F (round flange) versions: DN32-50.
Marking:: Sea-land, date of production (DD/MM/YYYY), pressure, temperature and other technical information on data plate on body.
Installation Requirements:: R001 R415
Expiry date:: 31/10/2026
Model:: MVX Range of vertical multistage pumps 3-6-10-15: nominal flow rate MVX 3 MVX 6 MVX 10 MVX 15

Approval Holder:: SEA-LAND SRL

Company Name
SEA-LAND SRL
Address
Via. E. Mattei 25 Torreglia (PD)
Postcode
35038
Country
Italy
Phone
+39 049 5212944
General Email
info@sea-land.it

View All Listings by this Company

WRAS Approval Number: #2110119

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 2110119
Size:: NKV1-NKV3 models - F (round flange) versions: DN25. NKV6-NKV20 models - F (round flange) versions: DN32-50. NKV1-NKV20 models - T (oval flange), V (Victaullic - EV; Grooved - VR), C (clamp flanges) & F (round flange) versions: DN32-50.
Marking:: DAB, Company Information,model name, date of production (DD/MM/YYYY), pressure, temperature and other technical information on data plate on body.
Installation Requirements:: R001 R415
Expiry date:: 31/10/2026
Model:: NKV 1, NKV 3, NKV 6, NKV 10, NKV 15 & NKV 20 PUMP RANGES Code example (EV range): NKV 32 / 13 - 2 X Where: NKV = Pump model 20 = Nominal flow rate [m³/h] 13 = No. of stages/impellers 2 = Number and type of turned impeller X = Materials " " = Cast Iron/AISI 304; X = AISI 316

Approval Holder:: DAB PUMPS SPA

Company Name
DAB PUMPS SPA
Address
Via Marco Polo 14 Mestrino (PD)
Postcode
35035
Country
Italy
General Email
certifications@dwtgroup.com

View All Listings by this Company