‘Qualflex Excel’ range of stainless steel over braided, PEX lined flexible hoses, incorporating EPDM or fibre washers. The products can be supplied with a range of end connections and seals. Some models also incorporate integral isolation valves. Push-fit fittings for use for with: Copper Pipes manufactured in accordance with BS EN 1057 Plastic PB pipes manufactured in accordance with BS 7291-2 Plastic PEX pipes manufactured in accordance with BS 7291-3 Maximum working pressure: 6.0 bar. Maximum operating temperature: 65°C.

Section:

1860 Tubes

Section Subtitle:

Plastic hoses.

WRAS Approval Number:

240702059

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

Qualflex, QWRAS, year of manufacture (YY) and temperature and pressure on ferrule.

Installation Requirements:

R001 R008

Expiry date:

31/07/2029

Model:

06PEX 08PEX 10PEX 12PEX Plastic Qualflex Pusfit: 15 - 22mm Polypipe Pushfit: 15 & 22mm John Guest Pushfit: 15 & 22mm Qualflex Valved Pushfit: 15 - 22mm Flat faced Straight: 1/2" & 3/4" BSP captive nut Flat faced Straight: 1/2" & 3/4" BSP captive nut Standpipe: 6mm - 15mm Flat Faced Female Elbow: 3/4" BSP captive nut Retained Female Straight: 1/2" & 3/4" BSP captive nut Retained Female Straight: 1/2" & 3/4" BSP captive nut Retained Female Elbow: 3/4" BSP captive nut Brass Pushfit: 10mm - 15mm Qualflex pushfit: 10mm - 22mm Compression with Iso Valve: 15 & 22mm Compression: 15 - 28mm Flat Faced Straight: 3/8” - 1.1/4" BSP captive nut. Flat Faced Female Elbow: 3/8" - 1" BSP captive nut Retained Female Straight: 3/8" - 3/4" BSP captive nut. Retained Female Elbow: 3/8" - 3/4" BSP captive nut Coned Female Straight: 1/4" - 1/2" BSP captive nut Coned Female Elbow: 1/4" - 1/2" BSP captive nut Female Straight: 7/16" UNF Captive nut Male Straight: 1/4" - 1” BSP Male Straight: 3/8" NPT Standpipe: 3/8" & 10mm - 28mm Monoblock: M8, M10 & M12

Approval Holder:

Hydralectric Group Ltd.

Company Name

Hydralectric Group Ltd.

Address

5 High Road, Byfleet, Surrey

Postcode

KT14 7QE

Country

United Kingdom

Phone

+44 1932 334 200

General Email

jamie.balkwill@hydralectric.com

View All Listings by this Company

Flexible safety hose assembly with PVC inner hose and corrugated outer cover incorporating EPDM gaskets. The inlet of the hose incorporates a plastic strainer. The hose is fitted with an integral device consisting of a water sensitive material which expands when in contact and is intended to stop the flow of water (please note that this function has not been verified by test). Maximum working pressure: 10.0 Bar. Maximum operating temperature: 60.0°C.

Section:

1860 Tubes

Section Subtitle:

Plastic hoses.

WRAS Approval Number:

240702062

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” BSP (F) captive nut x ¾” BSP (F) captive nut.

Marking:

TP Reflex logo, WRAS and date of manufacture (D/WW/YY) on outlet ferule. Model number, flow arrow, max pressure, max temperature and material on body of safety switch.

Installation Requirements:

R001

Expiry date:

31/07/2029

Model:

SIC800

Product Images

Approval Holder:

TP Reflex Group S.p.A

Company Name

TP Reflex Group S.p.A

Address

Via C. Battisti 91, 21040 Venegono Inferiore (VA)

Country

Italy

Phone

+390331816611

View All Listings by this Company

Inlet hose consisting of a EPDM inner hose layer and corrugated outer cover. The hose is fitted with an integral device consisting of a water sensitive material which expands when in contact with water. Maximum working pressure 10.0 bar. Maximum operating temperature 90°C.

Section:

1860 Tubes

Section Subtitle:

Plastic hoses.

WRAS Approval Number:

240704011

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” BSP captive nut

Marking:

Wuxi Jinhua, Model, WRAS, date of manufacture (YYYY) etched on hose cover.

Installation Requirements:

R001 R150

Expiry date:

31/07/2029

Model:

GJS-FL-115HW - Aquastop inlet hose.

Product Images

Approval Holder:

Wuxi Jinhua Yiyuan Technology Co.,Ltd.

Company Name

Wuxi Jinhua Yiyuan Technology Co.,Ltd.

Address

No. 3, Industrial Park Binhu District Wuxi City Jiangsu Province

Country

China

View All Listings by this Company

Manufacturer:

Wuxi Jinhua Yiyuan Technology Co.,Ltd.

Company Name

Wuxi Jinhua Yiyuan Technology Co.,Ltd.

Address

No. 3, Industrial Park Binhu District Wuxi City Jiangsu Province

Country

China

View All Listings by this Company

Range of TPE shower hoses (various finishes) with EPDM seals. Open outlet use only. Maximum operating temperature 60.0°C

Section:

1860 Tubes

Section Subtitle:

Plastic hoses.

WRAS Approval Number:

240902020

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (F) Captive nut

Marking:

Axor on nut

Installation Requirements:

R001

Expiry date:

30/09/2029

Model:

28 282 xx0 28 284 xx0 28 286 xx0 Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Product Images

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Range of stainless steel or brass double interlocking, TPS lined flexible hose assemblies (various finishes) incorporating EPDM gaskets. Maximum operating temperature 60°C. Open Outlet Use Only

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

240602038

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model

Marking:

IL Flessibile logo, WRAS & date of manufacture (MM/YY) on end connections

Installation Requirements:

R001

Expiry date:

30/06/2029

Model:

Model Code: FXF2CX.AABBCCCC.DDD FXF2CX Trade Name Explanation: FX = Double interlock hose in brass or stainless steel F = TPS Inner Tube 2: Brass Rubber Holders C: WRAS Approved X: Connection Combinations, where X can be replaced with any of the following: A = ½” BSP (F) x ½” BSP (F) B = ½” BSP (F) x M15x1 F = ½” BSP (F) x 3/8” BSP (M) H = ½” BSP (F) x 3/8” BSP (F) I = M15x1 x M15x1 L = M15x1 x 3/8” BSP (M) M = M15x1 x 3/8” BSP (F) Q = 3/8” BSP (M) x 3/8” BSP (M) R = 3/8” BSP (M) x 3/8” BSP (F) S = 3/8” BSP (F) x 3/8” BSP (F) T = ½” BSP (F) x M12x1 AABBCCCC.DDD Trade Name Explanation: AA: identifies hose raw material and diameter, which can be replaced with any of the following: AC = Brass CW508L 022 External diameter 14 AD = Brass CW508L 026 External diameter 14 AQ = Brass CW508L 022 External diameter 15 AR = Brass CW508L 026 External diameter 15 AV = Brass CW508L 022 External diameter 17 AW = Brass CW508L 026 External diameter 17 AF = INOX AISI 304 External diameter 14 AS = INOX AISI 304 External diameter 15 AX = INOX AISI 304 External diameter 17 AJ = Brass CW 508L 022 External diameter 12 BB: identifies the type of external finish, and can be replaced with any of the following: CR = Chromed CZ = Brushed Chrome GM = Raw Brass NS = Brushed Nickel NZ = Brushed Nickel Phosphor IG = Raw INOX IS = Brushed INOX PO = PVD Gold PA = PVD Gold Brushed PG = PVD Black Metal PB = PVD Black Metal Brushed PH = PVD Champagne Brushed PR = PVD Copper Bronze PE = PVD Copper Bronze Brushed PI = PVD Grey 07 Brushed PK = PVD High Brass PQ = PVD High Brass Brushed PM = PVD Pale Gold Brushed PC = PVD Rose Gold Family Surface finishes: Raw, Chromed, Electropolished, Polished, Various Galvanics Finishing, Various PVD Finishing, Various Paint Finishing. CCCC: identifies the type of fittings, which can be replaced with any of the following: Any combination of (2) alphanumeric characters denoting only external aesthetic fittings dimensions. All of fittings are unwetted. DDD: identifies the length (between 50 and 200cm), and can be replaced with any of the following as examples: 050 = 50cm length, 100 = 100cm length, 150 = 150cm length, 200 = 200cm length.

Product Images

Approval Holder:

IL FLESSIBILE di Nicastri e C srl

Company Name

IL FLESSIBILE di Nicastri e C srl

Address

VIA FELICE VEDANI 16 INVORIO

Postcode

28045

Country

Italy

Phone

+39 335 5948283

General Email

g.buratti@ilflessibile.it

View All Listings by this Company

Manufacturer:

IL FLESSIBILE di Nicastri e C srl

Company Name

IL FLESSIBILE di Nicastri e C srl

Address

VIA FELICE VEDANI 16 INVORIO

Postcode

28045

Country

Italy

Phone

+39 335 5948283

General Email

g.buratti@ilflessibile.it

View All Listings by this Company