Single hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet can incorporate either a plastic flow straightener or a plastic aerator. When supplied with a plastic flow straightener there is a combined EPDM washer and stainless steel strainer behind it. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a swivel spout.

WRAS Approval Number:

2110803

Size:

Stainless steel braided EPDM lined flexible hose assemblies with ½” captive nut end connections.

Marking:

NABIS ON OPERATING MEMBER

Installation Requirements:

R001 R006 R010

Expiry date:

31/10/2026

Model:

B08928 LEVICO MONO KITCHEN COMBINATION TAP ASSEMBLY

Approval Holder:

Wolseley UK Ltd.

Company Name

Wolseley UK Ltd.

Address

2 Kingmaker Court, Warwick Technology Park, Warwick

Postcode

CV34 6DY

Country

United Kingdom

Phone

01926705792

General Email

martin.lister@wolseley.co.uk

View All Listings by this Company

Expansion vessels with a stainless steel body and EPDM membrane. Maximum working pressure 15.0 bar. Maximum operating temperature 100°C.

Section:

1000 Expansion Vessels

WRAS Approval Number:

2103337

Note:

Expansion vessels should be installed in the vertical orientation and located so as to minimise the length of any connecting pipework.

Size:

½” BSP (M)

Marking:

Aquaystem logo (‘Aquasystem’, where the ‘q’ is a silhouette of an expansion vessel) and other technical information on adhesive label on body. (Aquasystem is a brand of Zilio Industries Spa).

Installation Requirements:

R001 R530

Expiry date:

31/03/2026

Model:

XVES050000: 0.16L POTABLE WATER SHOCK ARRESTOR 5.0 BAR & XVES050001:0.16L POTABLE WATER SHOCK ARRESTOR 1.5 BAR EXPANSION VESSELS

Manufacturer:

Zilio Industries SPA

Company Name

Zilio Industries SPA

Address

Via Sega Vecchia, 65 Località Friola 36050 Pozzoleone (Vicenza)

Country

Italy

Phone

[+39] 049 59 57 552

View All Listings by this Company

Expansion vessels incorporating a stainless steel body and EPDM membrane. Maximum working pressure 10.0 bar. Maximum operating temperature 100˚C.

Section:

1000 Expansion Vessels

Size:

½” BSP (M)

Marking:

Aquasystem, model, serial No, date of manufacture (DD/MM/YYY) & other technical information on adhesive label on body.

Installation Requirements:

R001

Expiry date:

30/09/2026

Model:

WSA050 = 0.50 litre WSA100 = 1 litre WSA200 = 2 litres

Product Images

Approval Holder:

Zilio Industries SPA

Company Name

Zilio Industries SPA

Address

Via Sega Vecchia, 65 Località Friola 36050 Pozzoleone (Vicenza)

Country

Italy

Phone

[+39] 049 59 57 552

General Email

info@zilioindustries.com

View All Listings by this Company

Filling link assembly, incorporating a sliding manifold with EPDM ‘O’-rings, isolation valves and an isolation valve with a double check valve assembly (verified by test as suitable for backflow protection against Fluid Category 3). Maximum working pressure 10.0 bar. Cold water use only.

Section:

1015 Filling Loop

Size:

½” BSP (M) x ¾” BSP (M).

Marking:

Novasfer logo, date of manufacture (YY/WW), made in Italy and CR on body.

Installation Requirements:

R001

Expiry date:

30/06/2026

Model:

Art. Kit 1360/1361/3435

Product Images

Approval Holder:

Novasfer Srl Unipersonale

Company Name

Novasfer Srl Unipersonale

Address

Via G. Galilei 3 Fraz. Carzago 25080 Calvagese D.Rivieria (BS)

Country

Italy

Phone

Tel: +39 030 6809011 Fax: +39 030 6800172

View All Listings by this Company

Manufacturer:

Novasfer Srl Unipersonale

Company Name

Novasfer Srl Unipersonale

Address

Via G. Galilei 3 Fraz. Carzago 25080 Calvagese D.Rivieria (BS)

Country

Italy

Phone

Tel: +39 030 6809011 Fax: +39 030 6800172

View All Listings by this Company

Aquaflow polypropylene bodied compression fittings with EPDM ‘O’-rings for use with Elysee PE80 blue pipes. The fittings are supplied with a pipe liner. Above and below ground use. Maximum working pressure 12.5 bar. Cold water use only.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2010409

Note:

The liners supplied with each fitting must be used to maintain the validity of this approval. R008 applies to the connecting blue pipework when used above ground.

Size:

See model

Marking:

Fittings: AQUAFLOW, DVGW, EU, size and PN on the compression nut. Size and date of manufacture (clock format) on body. Pipe: AQUAFLOW, EN12201, size, PN and production date code (CDDMMY, where C = decade, and is replaced with 6 to indicate 2020).

Installation Requirements:

R001 R008

Expiry date:

31/10/2025

Model:

Aquaflow fittings & pipes for WRAS Approval AQUAFLOW COMPRESSION FITTINGS 20mm, 25mm, 32mm Male Adaptor 3200*****Q / Female Adaptor 320A*****Q / Male Elbow 322A*****Q / Female Elbow 322B*****Q / Wall Female Elbow 322D*****Q - The first *** denotes the 1st end diameter (016→16mm, 020→20mm etc). The last ** denotes the BSP thread (male or female) in inches (01→1/2”, 02→3/4”, 03→1” etc) Coupling 321******Q / Elbow 322******Q - The first *** denotes the 1st end diameter (016→16mm, 020→20mm etc). The last *** denotes the 2nd end diameter (016→16mm, 020→20mm etc). Reducing Coupling 321A*****Q - The first *** denotes the 1st end diameter (016→16mm, 020→20mm etc). The last ** denotes the 2nd end diameter (16→16mm, 20→20mm etc). Female Tee 3230*****Q / Male Tee 323A*****Q - The first *** denotes the 1st and 2nd end diameters (016→16mm, 020→20mm etc). The last ** denotes the BSP thread in the middle of the part (male or female) in inches (01→1/2”, 02→3/4”, 03→1” etc) End Plug 320B00***Q - The last *** denotes the nominal diameter (016→16mm, 020→20mm etc). Tee 324******Q - The first *** denotes the nominal diameter left and right (016→16mm, 020→20mm etc). The last *** denotes the nominal diameter of the middle connection (016→16mm, 020→20mm etc). Reducing Tee 324A*****Q - The first *** denotes the nominal diameter left and right (016→16mm, 020→20mm etc). The last ** denotes the nominal diameter of the middle connection (16→16mm, 20→20mm etc). Elbow Female For POP-UP 322C*****Q - The first *** denotes the 1st and 2nd end diameters (016→16mm, 020→20mm etc). The last ** denotes the BSP thread in the middle of the part in inches (01→1/2”, 02→3/4”) Repair Coupling 321B00***Q - The last *** denotes the nominal diameter of the connection (left and right the same) (016→16mm, 020→20mm etc). Universal Adaptor 321C*****Q - The first *** denotes the nominal diameter of the PE pipe connection (016→16mm, 020→20mm etc). The last ** denotes the nominal diameter of the alternative pipe material connection (15→15mm, 22→22mm, 28→28mm). Global Transition 321D0****Q- The first ** denotes the diameter of the alternative pipe material connection (22→22mm, 27→27mm, 34→34mm) . The last ** denotes the nominal diameter of the PE pipe connection (20→20mm, 25→25mm, 32→32mm). AQUAFLOW PE80 BLUE PIPES 20mm, 25mm, 32mm 21125020***Q - 20mmX2.3mm, SDR9, SF1.25, PN12.5 21125025***Q - 25mmX2.3mm, SDR11, SF1.25, PN12.5 21125032***Q - 32mmX3.0mm, SDR11, SF1.25, PN12.5 For the pipe codes, first two digits are the product code (same for all), next three digits state pressure rating (125 – PN12.5 bars), next three digits show external diameter of pipe (020 – 20mm) and last three digits are the length of the coil as customer prefers (025-25m, 050-50m, 100-100m)

Approval Holder:

Kalsi Plastics (UK) Limited

Company Name

Kalsi Plastics (UK) Limited

Address

Kalsi House 5 Tomey Road Sparkhill

Postcode

B11 2NJ

Country

Birmngham

General Email

george.argiropoulos@elysee.com.cy

View All Listings by this Company