A range of combined bath filler and overflow with a plastic body with a variety of different trims. The products are supplied with a cable operated pop-up waste. For open outlet use only. Maximum operating temperature 65°C.

Section:

0681 Combination Tap Assemblies

Section Subtitle:

Miscellaneous.

WRAS Approval Number:

2101048

Size:

¾” BSP male

Marking:

Viega on waste operating member

Installation Requirements:

R001 R576

Expiry date:

31/01/2026

Model:

Multiplex Trio MT 5 97362KA, 97364KA, 97363KA, 97368KA and 97639DO

Product Images

Approval Holder:

Viega GmbH & Co KG

Company Name

Viega GmbH & Co KG

Address

Viega Platz 1, D-57439 Attendorn

Country

Germany

View All Listings by this Company

Range of chemical dosing equipment which incorporate self-closing valves with a plastic body. The outlet of the injector incorporates a connection for injection of chemicals via venturi action. Maximum working pressure 9.0 bar. Maximum operating temperature – 60ºC

Section:

0970 Dosing Equipment

Section Subtitle:

Fittings in this section have been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. The decision of the Scheme to list them is not to be taken as any guide as to their effectiveness to do the job for which they have been designed

WRAS Approval Number:

2012065

Note:

Only suitable for use with chemicals no greater than a FC3, additional backflow protection is required for chemicals greater than FC3. Must be installed in the vertical plane.

Size:

¾” BSP male inlet

Marking:

SEKO, max pressure, max temperature and other technical info on label on housing.

Installation Requirements:

R001 R160

Expiry date:

31/12/2025

Model:

PXB1F04 PROMAX BUTTON FLEX-GAP 4L/MINPRODUCT PXB1F16 PROMAX BUTTON FLEX-GAP 14L/MINPRODUCT PXB1F30 PROMAX BUTTON FLEX-GAP 30L/MINPRODUCT PXB4F04 PROMAX BUTTON FLEX-GAP 4L/MINPRODUCT PXB4F16 PROMAX BUTTON FLEX-GAP 14L/MINPRODUCT PXB4F30 PROMAX BUTTON FLEX-GAP 30L/MINPRODUCT PXS1F04 PROMAX SLIDE FLEX-GAP 4L/MINPRODUCT PXS1F16 PROMAX SLIDE FLEX-GAP 14L/MINPRODUCT PXS1F30 PROMAX SLIDE FLEX-GAP 30L/MINPRODUCT PXS4F04 PROMAX SLIDE FLEX-GAP 4L/MINPRODUCT PXS4F16 PROMAX SLIDE FLEX-GAP 14L/MINPRODUCT PXS4F30 PROMAX SLIDE FLEX-GAP 30L/MINPRODUCT

Product Images

Approval Holder:

SEKO SpA

Company Name

SEKO SpA

Address

Via Salaria KM 92, 200 02010 S.Sufina (RI) Italy

View All Listings by this Company

Range of water filter systems with optional distributor heads. The inlets incorporate a non-return valve. Maximum working pressure 6.9 bar. Cold water use only.

Section:

1050 Filters and Housings

Size:

¾” BSP male inlet and outlet

Marking:

BRITA, WRAS and technical information on adhesive label on body.

Installation Requirements:

R001 R120 R150 R170

Expiry date:

31/12/2025

Model:

Professional water filter system (B2B) "Purity Steam":- Purity 450 Steam including cartridge assembly Purity 450 and lid assembly MDU 450 or optional lid assembly DH 450. Purity 600 Steam including cartridge assembly Purity 600 Steam and lid assembly MDU 600 or optional lid assembly DH 600. Purity 1200 Steam including cartridge assembly 1200 and lid assembly MDU 1200 or optional lid assembly DH 1200 The models are available with two different distributor heads (MDU and DH), the MDU (measurement display unit) has an electronic display to show the filtered volume, the DH (distributor head) has no electronic display.

Product Images

Approval Holder:

Brita GmbH

Company Name

Brita GmbH

Address

Heinrich Hertz Strasse 4 D-65232 Taunusstein

Country

Germany

Phone

+49 6128 746 0

General Email

info@brita.net

View All Listings by this Company

Manufacturer:

Brita GmbH

Company Name

Brita GmbH

Address

Heinrich Hertz Strasse 4 D-65232 Taunusstein

Country

Germany

Phone

+49 6128 746 0

General Email

info@brita.net

View All Listings by this Company

Range of complete water filter heads and compatible filter cartirdges with plastic bodies and EPDM ‘O’-rings. The FX filters are carbon block based and the VH-IEN filters use an ion exchange resin. Maximum working pressure 8.6 bar. Cold water use only.

Section:

1050 Filters and Housings

WRAS Approval Number:

2012361

Note:

Please note that the product is marked with ‘38°C’ which the manufacturer states is the ambient air temperature and not water temperature. The WRAS Approval is for cold water use only.

Size:

10mm push fit (to filter head).

Marking:

Microfilter logo and technical information on adhesive label on body.

Installation Requirements:

R001 R008 R120 R150 R170

Expiry date:

31/12/2025

Model:

FX10, FX15 & FX17. VH-IEN 1500, VH-IEN 3000, VH-IEN 6000 & VH-IEN 9000

Product Images

Approval Holder:

Microfilter Co., Ltd

Company Name

Microfilter Co., Ltd

Address

162-1 SANSU-RI DEOKSAN-MYEON JINCHEONKUN CHUNGBUK 365-842

Phone

+82-43-531-7024

View All Listings by this Company

Manufacturer:

Microfilter Co., Ltd

Company Name

Microfilter Co., Ltd

Address

162-1 SANSU-RI DEOKSAN-MYEON JINCHEONKUN CHUNGBUK 365-842

Phone

+82-43-531-7024

View All Listings by this Company

FloFit range of push fit fittings (polybutylene body) for use with Qual-Pex Barrier Pipe, Qual-PB polybutylene barrier pipe or copper tube. Above ground use only. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2101806

Size:

see model

Marking:

FloFit+ on body of fitting. Kitemark and size on collet of fitting.

Installation Requirements:

R001

Expiry date:

31/01/2026

Model:

Straight Coupling: FC10 – 10mm FC15 – 15mm FC22 – 22mm FC28 – 28mm Reducing Coupling: FRC15 – 15mm x 10mm FRC22 – 22mm x 15mm Straight Stem Reducer: FSR1015 – 10mm x 15mm FSR1522 – 15mm x 22mm FSR1528 – 15mm x 28mm FSR2228 – 22mm x 28mm 90° Elbow: FB10 – 10mm FB15 – 15mm FB22 – 22mm FB28 – 28mm Equal Tee: FT10 – 10mm FT15 – 15mm FT22 – 22mm FT28 – 28mm Reducing Tee: FRT151010 – 15mm x 10mm x 10mm FRT151510 – 15mm x 15mm x 10mm FRT151522 – 15mm x 15mm x 22mm FRT221515 – 22mm x 15mm x 15mm FRT221522 – 22mm x 15mm x 22mm FRT222210 – 22mm x 22mm x 10mm FRT222215 – 22mm x 22mm x 15mm FRT282222 – 28mm x 22mm x 22mm FRT282228 – 28mm x 22mm x 28mm FRT282815 – 28mm x 28mm x 15mm FRT282822 – 28mm x 28mm x 22mm FRT222228 – 22mm x 22mm x 28mm Stem Elbow: FS10 – 10mm FS15 – 15mm FS22 – 22mm Stop End: FE10 – 10mm FE15 – 15mm FE22 – 22mm FE28 – 28mm Outlets Socket/Socket Manifold: FM15410SK/SK – 15mm Pipe x 4 – 10mm FM15410SK/SP – 15mm Pipe x 4 – 10mm FM15210SK/SK – 15mm Pipe x 2 – 10mm FM15210SK/SP – 15mm Pipe x 2 – 10mm FM22410SK/SK – 22mm Pipe x 4 – 10mm FM22410SK/SP – 22mm Pipe x 4 – 10mm FM22210SK/SK – 22mm Pipe x 2 – 10mm FM22210SK/SP – 22mm Pipe x 2 – 10mm FM22415SK/SK – 22mm Pipe x 4 – 15mm FM22415SK/SP – 22mm Pipe x 4 – 15mm FM22215SK/SK – 22mm Pipe x 2 – 15mm FM22215SK/SP – 22mm Pipe x 2 – 15mm Straight Tap Connector: FTC1512 – 15mm x ½” FTC1534 – 15mm x ¾” FTC2234 – 22mm x ¾” Bent Tap Connector: FBC1512 – 15mm x ½” Blue Collet Clip (Cold Water Use): FCB10 – 10mm FCB15 – 15mm FCB22 – 22mm FCB28 – 28mm Red Collet Clip (Hot Water Use): FCR10 – 10mm FCR15 – 15mm FCR22 – 22mm FCR28 – 28mm Blue Polybutylene Pipe Insert: FPI10 – 10mm FPI15 – 15mm FPI22 – 22mm FPI28 – 28mm White PE-X Pipe Insert: FXI10 – 10mm FXI15 – 15mm FXI22 – 22mm FXI28 – 28mm

Approval Holder:

FloPlast Ltd

Company Name

FloPlast Ltd

Address

Eurolink Business Park Castle road Sittingbourne

Postcode

ME20 3FP

Country

United Kingdom

Phone

01795431731

General Email

henyb@floplast.co.uk

View All Listings by this Company

Manufacturer:

FloPlast Ltd

Company Name

FloPlast Ltd

Address

Eurolink Business Park Castle road Sittingbourne

Postcode

ME20 3FP

Country

United Kingdom

Phone

01795431731

General Email

henyb@floplast.co.uk

View All Listings by this Company